Yarisworld Archive

HELP!! spring install help again lol

16 posts · 4,795 views

tristanOriginal postOrlando, FL · Feb 18, 2009#1
okay so i'm trying to do the fronts and i cant seem to hold the allen key without it moving while i try to unscrew the nut, do you guys have any suggestions or tips? thanks!

Replies 15

TamagoOff Grid · Feb 18, 2009#2
Originally Posted by tristan ↑
okay so i'm trying to do the fronts and i cant seem to hold the allen key without it moving while i try to unscrew the nut, do you guys have any suggestions or tips? thanks!
http://www.lowes.com/lowes/lkn?actio...399&lpage=none

that, or use an impact gun
TamagoOff Grid · Feb 18, 2009#4
Originally Posted by tristan ↑
yeah, i have the sockets its just i can't hold the middle with the allen key because it moves with the wrench

did you look at the sockets?

they're hollow

you can put your allen key thru the middle of this and hold it with pliers or something.. i dunno

that or get an impact gun :)
tristanThread starterOrlando, FL · Feb 18, 2009#5
Originally Posted by Tamago ↑
did you look at the sockets?

they're hollow

you can put your allen key thru the middle of this and hold it with pliers or something.. i dunno

that or get an impact gun :)
OHH sorry! i didnt notice that lol
i have the 17mm offset wrench like in the diy, maybe i'm not using enough strength!
yarstarGeorgia · Feb 18, 2009#6
If you haven't busted your knuckles yet and lost some blood....your not doing it right.
tristanThread starterOrlando, FL · Feb 18, 2009#7
Originally Posted by yarstar ↑
If you haven't busted your knuckles yet and lost some blood....your not doing it right.
oh ive already lost some blood lol
uhh idk maybe i'm turning it wrong?
i feel like putting the front back together and just taking it to someone, i'm frustrated 😠
yarstarGeorgia · Feb 18, 2009#8
it turns the normal way. Right to tighten, left to loosen.

You have to give it some effort, maybe yours is stuck.

Spray it with WD40 and walk away from it for 10 minutes.

Mine took half the skin off my hand I was so cut up from it.
tristanThread starterOrlando, FL · Feb 18, 2009#9
Originally Posted by yarstar ↑
it turns the normal way. Right to tighten, left to loosen.

You have to give it some effort, maybe yours is stuck.

Spray it with WD40 and walk away from it for 10 minutes.

Mine took half the skin off my hand I was so cut up from it.
eek, thanks
i just got it off! whooop 🙂
yarstarGeorgia · Feb 18, 2009#10
Originally Posted by tristan ↑
eek, thanks
i just got it off! whooop 🙂
Congrats. The rest is easy.
firemachine69Sudbury, On · Feb 18, 2009#11
Good job.

For future reference, an impact wrench makes this about a hundred times easier. 👍
SaggioSeattle WA, · Feb 18, 2009#12
Originally Posted by firemachine69 ↑
Good job.

For future reference, an impact wrench makes this about a hundred times easier. 👍
How do you fit an impact wrench between the strut and the wiper cowl area? You have about 1-2 inches in there. Barely enough room for the allen key and normal wrench to fit.
The rears you can use an impact wrench, but not the front.

Unless there is access to the strut with the whole wiper cowl removes which I haven't done on these cars yet.
Malaya1221Torrance, Ca · Feb 18, 2009#13
yup, whole wiper cowl remove!
TamagoOff Grid · Feb 18, 2009#14
i've never attempted removing the struts without pulling the wiper cowl.. and i don't think i ever will..

after all it's only like 12 10mm bolts lol
tristanThread starterOrlando, FL · Feb 18, 2009#15
Well guys I finished finally :)
thanks for your help
i'll post some pictures later after i rest, i have a killer headache and i'm tired haha
at3GGVA Beach · Feb 18, 2009#16
for future reference...if you offest the allen so it pins itself up against the side of the cowl or whatever is adjacent to the bolt, it will wedge itself in and you wont have to hold it. Thats what i did.