I've always had it in my Mustang and am considering using it in the Yaris too...right now the car only has 1000 miles on it with the factory oil. Any suggestions on when to change to synthetic?
Anyone running Royal Purple?
81 posts · 36,292 views · page 1 of 2
Replies 80
did my switch on my first service 5000 km's with rp
Did you do it yourself or have the dealer/oil change place do it?Originally Posted by saspy ↑did my switch on my first service 5000 km's with rp
I'm considering doing it myself because oil change places tend to be a real hassle🤷
Most oil change places only care about getting the job done as quick as possible, so they don't leave your car draining oil for too long.Originally Posted by firebird1999us ↑Did you do it yourself or have the dealer/oil change place do it?
I'm considering doing it myself because oil change places tend to be a real hassle🤷
I'd suggest doing it yourself, and leaving the care about an hour to drain the old oil, so you get as much of it out before putting in the new one.
I've only ever changed the oil in my riding lawn tractor before...but I wouldn't imagine it's much different? Drain the oil, remove and replace the filter, add oil until it's full to the mark on the dipstick...did I miss anything?Originally Posted by DFA ↑Most oil change places only care about getting the job done as quick as possible, so they don't leave your car draining oil for too long.
I'd suggest doing it yourself, and leaving the care about an hour to drain the old oil, so you get as much of it out before putting in the new one.
That's about it. Just be really careful not to overfill, and to store the oil somewhere to keep it from hurting the planet.
I'm almost sure there's an oil chance DIY guide somewhere in here, not sure if it was before the hack tho..
I'm almost sure there's an oil chance DIY guide somewhere in here, not sure if it was before the hack tho..
Royal Purple is great, but AMSoil is better. Plus AMSoil comes in 0w20, whereas Royal Purple only comes in 5w20. That said though, my dad runs Royal Purple 0w40 in his 996TT-S and it seems to perform better than when he was running Mobil1 0w-40. (1% more power, 1mpg better FE, 2% less oil consumption -- all of which can be placebo effect, but who knows?)
The Yaris is the easiest of all cars to change oil. I have the 2" TRD lowering springs on mine and I don't even jack my car up to change the oil. I am running the Royal Purple in my car now and it seems to run a little smoother than the Mobil 1. I use the K&N oil filter as well.
Just the K&N drop in or the CAI?Originally Posted by upyaris ↑The Yaris is the easiest of all cars to change oil. I have the 2" TRD lowering springs on mine and I don't even jack my car up to change the oil. I am running the Royal Purple in my car now and it seems to run a little smoother than the Mobil 1. I use the K&N oil filter as well.
The K&N oil filter. I have the AFE CAI.
HAd RP and dumped it after a week. Got MOTUL in there now but its the economy grade and not for rompin on the revs. RP gave the most power at the top of the rev band but somehow seemed sluggish down low around town. I assume you mean the RP std street oil, 5W-30, not the fancy race formula? Rp street, Its not full synth so changeover shouldnt be a prob.
Get one of thouse plastic cup-type filter wrench heads to help get the filter off. Works miracles. Only 3.5 Qts on th refill - 1/2 qt stays in the engine no matter how hard you try to drain it.
i use RP 5w30. love it! i also use the 75w90 trans fluid as well.
I have always just poured in 4 qts. Is this really bad????Originally Posted by TheSilkySmooth ↑Get one of thouse plastic cup-type filter wrench heads to help get the filter off. Works miracles. Only 3.5 Qts on th refill - 1/2 qt stays in the engine no matter how hard you try to drain it.
Did Toyota issue an updated TSB? Their last one didn't recommend 0w-20 for the Yaris.
I have done a lot of my own oil changes. this Yaris is the easiest car i have ever worked on. i changed to synthetic at 800 miles. the factory oil in the car was causing a rough start and a lot of noise in the morning (was getting down to -18*F) so i switched to Pennzoil Platinum.
i plan on changing to castrol edge. which has a good portion of its base oil as a PAO. i would like to run AMSoil or redline though.
i plan on changing to castrol edge. which has a good portion of its base oil as a PAO. i would like to run AMSoil or redline though.
Link to a thread or page that is not in the archive
That is my question! Does anyone online use the 0W20 in their Yaris? I would be interested to know if there was a jump in mileage for going to 0W20?Originally Posted by 1stToyota ↑Did Toyota issue an updated TSB? Their last one didn't recommend 0w-20 for the Yaris.
Yes, and over a year ago. Toyota issued a TSB which states one can use 20 weight oil in their 1.5L engines.Originally Posted by 1stToyota ↑Did Toyota issue an updated TSB? Their last one didn't recommend 0w-20 for the Yaris.
For the millionth time!
See attached official Toyota TSB, and you will see that the Yaris 1.5L engine can use 20 weight.
And yes, I've been using 0W-20 in my Yaris for the past 54,000 miles. Increase in MPG is just around 1% however. I use the light stuff so that it gets circulated quick during cold morning starts. Quick circulation means less wear and tear during the first start up. And it is during the first start up that 90% of engine wear happens. My engine does not consume any oil after 5,000 miles. The engine runs smooth and no strange sounds coming out of it either.
🙄Originally Posted by SilverGlow ↑Yes, and over a year ago. Toyota issued a TSB which states one can use 20 weight oil in their 1.5L engines.
For the millionth time!
It states 5w-20 NOT 20 OR 0w-20
See attached official Toyota TSB, and you will see that the Yaris 1.5L engine can use 20 weight.NO, you're drawing your own stupid conclusions again to alter their "5w-20" recommendation to fit into your straight 20 and 0w-20 needs for a southern Ca. climate condition that never needs 0w oil in the first place.
And yes, I've been using 0W-20 in my Yaris for the past 54,000 miles. Increase in MPG is just around 1% however. I use the light stuff so that it gets circulated quick during cold morning starts. Quick circulation means less wear and tear during the first start up. And it is during the first start up that 90% of engine wear happens. My engine does not consume any oil after 5,000 miles. The engine runs smooth and no strange sounds coming out of it either.You don't need to worry about cold morning startups, you live in so. Ca. ...and film strength always plays a part in not wearing and tearing your internals. Not saying you'll blow your motor or make it drink oil, just saying that you're asking for trouble for using a viscosity that is NOT listed for the Yaris in the Toyota TSB...did you do a XD engine swap? Yes? Then that'd be okay...Yaris 1.5 still, not okay, according to the Toyota TSB that you like so much but can't comprehend.
i think you guys were all related to GW bush the way you fight over oil
lol
lol
😁Originally Posted by Tamago ↑i think you guys were all related to GW bush the way you fight over oil
lol
I fight over what Toyota says is right for our motor...I don't like bad and maybe very costly advice being handed out.
nor do i..Originally Posted by 1stToyota ↑😁
I fight over what Toyota says is right for our motor...I don't like bad and maybe very costly advice being handed out.
but if 100 people on YW say that 0w20 is ok to run, then its fact.. don't bother opening that thing in your glove box (owners manual) YW says it, it's true! 👏
I highly, highly suggest that one runs what the factory calls for in regards to viscosity and weight. Especially for those that have never owned a car that utilizes a timing chain configuration.
Which is 5w-30 (5w-20 recommendation added later), and that's what I use...1% over the 40+mpg that I already get isn't worth the risk of using a viscosity that isn't listed on the Toyota TSB...unless of course you're forced to quote only a part of the multi-viscosity rating to fool yourself into thinking it's okay to use the wrong oil 🆘Originally Posted by Yaribhini ↑I highly, highly suggest that one runs what the factory calls for in regards to viscosity and weight. Especially for those that have never owned a car that utilizes a timing chain configuration.
Or bother looking at the oil capOriginally Posted by Tamago ↑nor do i..
but if 100 people on YW say that 0w20 is ok to run, then its fact.. don't bother opening that thing in your glove box (owners manual) YW says it, it's true! 👏
WAIT, wait.. toyota puts information like that on the cap?Originally Posted by 1stToyota ↑Or bother looking at the oil cap
yes, my oil cap says 5w30
Originally Posted by 1stToyota ↑🙄
It states 5w-20 NOT 20 OR 0w-20
NO, you're drawing your own stupid conclusions again to alter their "5w-20" recommendation to fit into your straight 20 and 0w-20 needs for a southern Ca. climate condition that never needs 0w oil in the first place.
You don't need to worry about cold morning startups, you live in so. Ca. ...and film strength always plays a part in not wearing and tearing your internals. Not saying you'll blow your motor or make it drink oil, just saying that you're asking for trouble for using a viscosity that is NOT listed for the Yaris in the Toyota TSB...did you do a XD engine swap? Yes? Then that'd be okay...Yaris 1.5 still, not okay, according to the Toyota TSB that you like so much but can't comprehend.
ALL the oil brands that sell 0w-20 make the claim that that their oil is a great match for ANY 5w-20 application. AMSoil, Mobil1 and others make this claim.
And you are dead wrong about California and 0w weight oil. Anytime the ambient temperature is below 40F one will IN FACt benefit from 0w oil. You are also very foolish to think that it does not snow in California. It does in fact.
Film strength and viscosity have NOTHING to do with each other. And in fact, there are some 20 weights that provide film longer then heavier oils.
What you fail to understand is that 0w-20 and 5w-20 provide the SAME protection at full operational temperatures. The difference is during the first morning start of the cold day. And if a 5w is fine, then a 0w will be too. This is true according to AMSoil, and Mobil1 and ALL other makes that make 0W oils.
According to Toyota, 5w-20 can be used safely in a Yaris 1.5L engine. Now, that being true, one can ALSO use 0w-20, 0w-30 too for our Yaris engines, and this according to ALL the makers of 0w oils.
It is too bad you behave like you know more about oil then Toyota, AMSoil, and Mobil1.
..or bother reading TSB's, that are published AFTER Toyota printed their caps....Originally Posted by 1stToyota ↑Or bother looking at the oil cap
So is four quarts of Castrol 5w-30 way to much?? I checked it and it is over the full line a little bit , but not drastically.
That say 5w-20 is for the Yaris, not 0w-20 😛Originally Posted by SilverGlow ↑..or bother reading TSB's, that are published AFTER Toyota printed their caps....
All but Toyota on Toyota's TSB. Funny that Toyota says 0w-20 is awesome for the Camry, but the Yaris needs 5w-20 😁Originally Posted by SilverGlow ↑ALL the oil brands that sell 0w-20 make the claim that that their oil is a great match for ANY 5w-20 application. AMSoil, Mobil1 and others make this claim.
And you are dead wrong about California and 0w weight oil. Anytime the ambient temperature is below 40F one will IN FACt benefit from 0w oil. You are also very foolish to think that it does not snow in California. It does in fact.Fool, 5w is winter weight, southern Ca doesn't need 0w, and the Yaris isn't supposed to use 0w-20, based on Toyota's TSB...it's the info that matters most to the Toyota dealership
Film strength and viscosity have NOTHING to do with each other. And in fact, there are some 20 weights that provide film longer then heavier oils.The oil that most resembles K-1 kerosene propbably needs to get to the valve train and cam lobes quicker.
What you fail to understand is that 0w-20 and 5w-20 provide the SAME protection at full operational temperatures. The difference is during the first morning start of the cold day. And if a 5w is fine, then a 0w will be too. This is true according to AMSoil, and Mobil1 and ALL other makes that make 0W oils.If that's true then Toyota wouldn't make a distinction between the two grades...shove what AMSOIL and what Mobil1 says about 0w-20 because it's NOT what Toyota says about 0w-20 for the Yaris motor (fact)
According to Toyota, 5w-20 can be used safely in a Yaris 1.5L engine.Yes.
Now, that being true, one can ALSO use 0w-20, 0w-30 too for our Yaris engines, and this according to ALL the makers of 0w oils.Wrong. One can't say that about any Toyota TSB ever issued for the US Yaris 1.5L...not 0w-20, not 0w-30
5w-20 and 5w-30, and that's the way it'll be until you can fully quote, exactly, a multi-viscosity recommendation of 0w-30 or 0w-20 for the Yaris in a Toyota TSB
It is too bad you behave like you know more about oil then Toyota, AMSoil, and Mobil1.🙄
Show me where Toyota says that "0w-20" is okay to use in the 1.5 Yaris motor on the Toyota TSB...you can't include Toyota with AMSOIL and Mobil1 because they don't agree with Toyota. They list "0w-20" but Toyota TSB will not list "0w-20" for the Yaris 1.5...you drawing your own conclusions isn't good enough for me, I'll stick with Toyota TSB and owner's manual recommendations. 😛
mine says TRD........Originally Posted by IllusionX ↑yes, my oil cap says 5w30
that must mean you can use Peanut butter instead of oil, since the cap doesn't designate specific oil weights!! 🎉Originally Posted by BLAZINBLUEVITZ ↑mine says TRD........
i use oil from the mexican joint down the street. when i hit the block im smelling like bean burritos......Originally Posted by Tamago ↑that must mean you can use Peanut butter instead of oil, since the cap doesn't designate specific oil weights!! 🎉
that sounds excellent... what weight is the oil?Originally Posted by BLAZINBLUEVITZ ↑i use oil from the mexican joint down the street. when i hit the block im smelling like bean burritos......
I would use ATLEAST a 5w oil with a timing chain. TSB interpretation or not, a timing chain configuration needs some oil weight.
No one knows???Originally Posted by The Shape ↑So is four quarts of Castrol 5w-30 way to much?? I checked it and it is over the full line a little bit , but not drastically.
Funny thing is that Toyota leaves NO room or need for an interpretation...they list the exact models and engines that can use 0w-20 and which models can use 5w-20 in their updated TSB. No where will you find 0w-20 being recommended by Toyota for the Yaris 1.5, period.Originally Posted by Yaribhini ↑I would use ATLEAST a 5w oil with a timing chain. TSB interpretation or not, a timing chain configuration needs some oil weight.
It's not enough to really worry about.Originally Posted by The Shape ↑No one knows???
but 3.5 to 3.7ish is what should be in there.
Yeah but going strictly by Toyota's recommended specs (whis I have no problem with doing I used 5W-30) I should need 4.3 quarts of oil in my Yaris instead of the 3.5-3.7 you recommend. Link to a thread or page that is not in the archive
I think it says more because that's actually a dry-fill, and you don't get it all out with an oil drain...some oil stays in the head, etc...even some oil stays in the pan if the drain plug isn't located on the bottom. Ever want to see how much oil stays in the engine try pulling an oil pump/oil pump housing...even the oil sending switch will be holding/blocking enough to put a big puddle of oil on the floor when removed.Originally Posted by The Shape ↑Yeah but going strictly by Toyota's recommended specs (whis I have no problem with doing I used 5W-30) I should need 4.3 quarts of oil in my Yaris instead of the 3.5-3.7 you recommend. Link to a thread or page that is not in the archive
The last updated TSB I read stated in a red box at the TOP of the page: NOTICE: 'Use the oil viscosity recommended oil on the oil filler cap or in the owners manual'. I must say its a terribly written TSB that has more loopholes than the Federal Tax LAW. The TSB .. 018 is in regards to the API SM rating. NOT a capability to use "alternate" oil weights. My owners manual ALSO recommends the use of a HEAVIER weight oil in severe operating conditions such as high speed highway - doesnt say anthing about urinating in the engine and applying vaseline(r) to your new leaky Fram filter. My engine can BARELY tolerate THE BEST synthetic thats formulated at the thin end of API 30 wt spec - never mind a piss 20 wt. But blowing your engine is a good economic stimulus for the Toyota service center. Dont Blame Me (or 1st T) for your misinterpretation of a TSB that is NOT for general readership.
From Silverglow #19 attachment
Toyota Supports ASE Certification Page 1 of 2
EG018-06
Title:
ILSAC GF-4 ENGINE OIL RECOMMENDATION
Models:
All ’06 – ’07 Toyota & Scion Technical Service BULLETIN
March 29, 2006
TSB UPDATE NOTICE:
The information contained in this TSB supercedes TSB No. EG001–06.
TSB No. EG001–06 is now obsolete and should be discarded.
Toyota Motor Corporation manufacturing plants have begun using ILSAC GF–4 engine oil. This engine oil is recommended due to its superiority in terms of fuel economy and engine protection and due to its benefits for both the customer and the environment.
ILSAC GF–4 can be used in all Toyota and Scion engines.
NOTE:
The recommended viscosity grade for this oil differs according to vehicle model. Use the recommended grade specified on the oil filler cap or in the Repair Manual or Owner’s Manual for each vehicle.
For Prius vehicles, refer to TSB No. EG050–04, “Engine Oil Specifications.”
2006 – 2007 model year Toyota and Scion vehicles.
OP CODE DESCRIPTION TIME OFP T1 T2
N/A Not Applicable to Warranty – – – –
ILSAC GF–4 SAE 5W–20
This oil has been set as the Toyota genuine engine oil, starting in February 2006 for the U.S. This oil is superior in terms of fuel economy, engine protection, and cold starting performance.
ILSAC GF–4 SAE 0W–20
This oil has even better fuel efficiency and cold starting performance than 5W–20. Initial application for 0W–20 is in the 2006 model year 2AZ–FE engine and will be used in new engines to be developed.
ENGINE
Introduction
Applicable Vehicles Warranty Information Recommended Engine Oils
ILSAC GF–4 ENGINE OIL RECOMMENDATION – EG018-06 March 29, 2006
Page 2 of 2
Engines That Can Use 5W–20 and 0W–20:
OIL ENGINE
ILSAC GF–4 SAE 5W–20
AZ series
GR series
JZ series
MZ series
NZ series
RZ series
UZ series
VZ series
1ZZ–FE
2TR–FE
ILSAC GF–4 SAE 0W–20
(Beginning with 2006 MY)
2AZ–FE Camry
2AZ–FE Solara
2AZ–FE Highlander
2AZ–FE RAV4 (ACA3#)
NOTE:
DO NOT use these oils in engines other than those listed above. These low–viscosity oils cannot maintain lubrication effectiveness in engines with older designs and could result in smoke emissions from the tailpipe and/or unusual engine noise.
Toyota Supports ASE Certification Page 1 of 2
EG018-06
Title:
ILSAC GF-4 ENGINE OIL RECOMMENDATION
Models:
All ’06 – ’07 Toyota & Scion Technical Service BULLETIN
March 29, 2006
TSB UPDATE NOTICE:
The information contained in this TSB supercedes TSB No. EG001–06.
TSB No. EG001–06 is now obsolete and should be discarded.
Toyota Motor Corporation manufacturing plants have begun using ILSAC GF–4 engine oil. This engine oil is recommended due to its superiority in terms of fuel economy and engine protection and due to its benefits for both the customer and the environment.
ILSAC GF–4 can be used in all Toyota and Scion engines.
NOTE:
The recommended viscosity grade for this oil differs according to vehicle model. Use the recommended grade specified on the oil filler cap or in the Repair Manual or Owner’s Manual for each vehicle.
For Prius vehicles, refer to TSB No. EG050–04, “Engine Oil Specifications.”
2006 – 2007 model year Toyota and Scion vehicles.
OP CODE DESCRIPTION TIME OFP T1 T2
N/A Not Applicable to Warranty – – – –
ILSAC GF–4 SAE 5W–20
This oil has been set as the Toyota genuine engine oil, starting in February 2006 for the U.S. This oil is superior in terms of fuel economy, engine protection, and cold starting performance.
ILSAC GF–4 SAE 0W–20
This oil has even better fuel efficiency and cold starting performance than 5W–20. Initial application for 0W–20 is in the 2006 model year 2AZ–FE engine and will be used in new engines to be developed.
ENGINE
Introduction
Applicable Vehicles Warranty Information Recommended Engine Oils
ILSAC GF–4 ENGINE OIL RECOMMENDATION – EG018-06 March 29, 2006
Page 2 of 2
Engines That Can Use 5W–20 and 0W–20:
OIL ENGINE
ILSAC GF–4 SAE 5W–20
AZ series
GR series
JZ series
MZ series
NZ series
RZ series
UZ series
VZ series
1ZZ–FE
2TR–FE
ILSAC GF–4 SAE 0W–20
(Beginning with 2006 MY)
2AZ–FE Camry
2AZ–FE Solara
2AZ–FE Highlander
2AZ–FE RAV4 (ACA3#)
NOTE:
DO NOT use these oils in engines other than those listed above. These low–viscosity oils cannot maintain lubrication effectiveness in engines with older designs and could result in smoke emissions from the tailpipe and/or unusual engine noise.
Use RP 5-20 with KN Oil Filter.
Rp street oil is not synthetic so why spend the money for an Sh/Sj oil when you can go out and buy John Deere tractor oil at your home center? OOOhhh its purple (at least for a day)! Recent UOA on BITOG show shearing to 20W during service of 5W-30 street oil. Now RP application specific racing oils are a diff story altogether .... Only Redline and Some Amsoils are true synthetics that are readily available; so, if youre going to pay a premium whay not get the "real" stuff - Unless your a "faker" and a "phoney".
Back to the TSB EG018-06: So, if your oil filler cap or manual requests 5W-20 as a recommended grade, you can use ILSCA-GF4 instead of the API SL/GF3 in the manual. I cant see any other way to interpret this TSB.
SO...Toyota says do NOT use 0w-20 in the Yaris 1.5L NZ series engine, and Glow keeps providing that TSB link as proof the he likes to use the wrong oil in his Yaris...Originally Posted by Yar Is Word ↑From Silverglow #19 attachment
Toyota Supports ASE Certification Page 1 of 2
EG018-06
Title:
ILSAC GF-4 ENGINE OIL RECOMMENDATION
Models:
All ’06 – ’07 Toyota & Scion Technical Service BULLETIN
March 29, 2006
TSB UPDATE NOTICE:
The information contained in this TSB supercedes TSB No. EG001–06.
TSB No. EG001–06 is now obsolete and should be discarded.
Toyota Motor Corporation manufacturing plants have begun using ILSAC GF–4 engine oil. This engine oil is recommended due to its superiority in terms of fuel economy and engine protection and due to its benefits for both the customer and the environment.
ILSAC GF–4 can be used in all Toyota and Scion engines.
NOTE:
The recommended viscosity grade for this oil differs according to vehicle model. Use the recommended grade specified on the oil filler cap or in the Repair Manual or Owner’s Manual for each vehicle.
For Prius vehicles, refer to TSB No. EG050–04, “Engine Oil Specifications.”
2006 – 2007 model year Toyota and Scion vehicles.
OP CODE DESCRIPTION TIME OFP T1 T2
N/A Not Applicable to Warranty – – – –
ILSAC GF–4 SAE 5W–20
This oil has been set as the Toyota genuine engine oil, starting in February 2006 for the U.S. This oil is superior in terms of fuel economy, engine protection, and cold starting performance.
ILSAC GF–4 SAE 0W–20
This oil has even better fuel efficiency and cold starting performance than 5W–20. Initial application for 0W–20 is in the 2006 model year 2AZ–FE engine and will be used in new engines to be developed.
ENGINE
Introduction
Applicable Vehicles Warranty Information Recommended Engine Oils
ILSAC GF–4 ENGINE OIL RECOMMENDATION – EG018-06 March 29, 2006
Page 2 of 2
Engines That Can Use 5W–20 and 0W–20:
OIL ENGINE
ILSAC GF–4 SAE 5W–20
AZ series
GR series
JZ series
MZ series
NZ series
RZ series
UZ series
VZ series
1ZZ–FE
2TR–FE
ILSAC GF–4 SAE 0W–20
(Beginning with 2006 MY)
2AZ–FE Camry
2AZ–FE Solara
2AZ–FE Highlander
2AZ–FE RAV4 (ACA3#)
NOTE:
DO NOT use these oils in engines other than those listed above. These low–viscosity oils cannot maintain lubrication effectiveness in engines with older designs and could result in smoke emissions from the tailpipe and/or unusual engine noise.
Thank you. 🙂
:facepalm:
this thread is still going?
this thread is still going?