RacerFreakXXXOriginal postSomers NY · Feb 12, 2009#1I am going to get wheels but I can't decide between getting 15x6.5 wheels and put them on my stock bridgestone tires(185/60R15) or get some nice 16x7 wheels and put some nice sticky rubber on them. I am also planning on geting coilovers. It would be cheaper to get some 15's by about $600 however I'd feel safer with better rubber, Opinions 🤷?
I was planning on getting konig feather with some toyo proxies 205/50
Replies 19
BLAZINBLUEVITZNEW YORK · Feb 12, 2009#215'S with 205/55'15......
Nagoya_TRD.SoCal · Feb 12, 2009#3I like the idea of 16s and nicer rubber. If you are going to stretch it, you can go lower too.
33OHDover, Ohio · Feb 12, 2009#4I have 15x7's with nice rubber (Bridgestone Potenzas) and I love them. I just sold my stock tires off my steelies and put snow tires on them for winter. That way I'm covered all year.
SailDesign. · Feb 12, 2009#5I have 16x7's +42, with 205-width rubber. Love them.
TamagoOff Grid · Feb 12, 2009#6TamagoOff Grid · Feb 12, 2009#7 Originally Posted by Thirty-Nine ↑
Maybe on an xA ... but you'll rub all day on a Yaris. 🙂
so?
fix it.
why are yaris owners so afraid of a little rub?
FunctionSpec626, Southern California · Feb 12, 2009#8 Originally Posted by
Tamago ↑ so?
fix it.
why are yaris owners so afraid of a little rub?
Haha, totally agree with you on this. Rub a little plastic and they feel like their car is going to fall apart.
I would get 15s and ditch the crappy stock rubber. Better rubber selection going with 15s. But 16s do look better on the Yaris's round bubbly body.
ChinoCharlesOH · Feb 12, 2009#9 Originally Posted by
Tamago ↑ so?
fix it.
why are yaris owners so afraid of a little rub?
Dude, rubbing is teh suck. Admit it.
TamagoOff Grid · Feb 13, 2009#10 Originally Posted by
ChinoCharles ↑ Dude, rubbing is teh suck. Admit it.
when you guys say "don't buy a +42 offset, you'll rub... you have to buy a +43 offset" does that 1 millimeter make THAT much of a difference? and where is the tire rubbing anyway? outside fenderwell?
33OHDover, Ohio · Feb 13, 2009#11Depends on if the 1 millimeter puts the tire into the fenderwell. 😁
ddongbaphay · Feb 13, 2009#12I've seen tires replaced under 5k miles, due to some rubbing. That fender can really mess stuff up.
With that said, minor rubbing shouldn't be a problem. I've had rubbing on my +38s, but it stopped once the fender lining made a hole.
TamagoOff Grid · Feb 13, 2009#13 Originally Posted by
ryank ↑ Depends on if the 1 millimeter puts the tire into the fenderwell. 😁
tire tread varies in width by much more than 1mm
which means if you rotate tires, you might rub
33OHDover, Ohio · Feb 13, 2009#14 Originally Posted by
Tamago ↑ tire tread varies in width by much more than 1mm
which means if you rotate tires, you might rub
I know, I was being a smartass. 😁
BLAZINBLUEVITZNEW YORK · Feb 13, 2009#15 Originally Posted by
Tamago ↑ when you guys say "don't buy a +42 offset, you'll rub... you have to buy a +43 offset" does that 1 millimeter make THAT much of a difference? and where is the tire rubbing anyway? outside fenderwell?
its rubs on the outside fenderwell like you said but its not that big of a deal. EXCEPT when your trying to be cool making a u turn or something else that requires you to turn steering wheel hard.......
SailDesign. · Feb 13, 2009#16 Originally Posted by Thirty-Nine ↑
My 16x7 +37 wheels with 205/50s rubbed like crazy--not just a rub here and there.
My 15x6.5 +38 wheels with 205/50 rubbed while turning hard and over most dips/bumps. Could I have lived with it? Sure. Instead, I switched to a 195 tire and +40 offset wheel for a 12mm difference in width, and that solved it. Even with that setup it rubs a tad bit, but I live with it.
My 16x7 +42 with 205/45-16 doesn't run at all. Ever.
Of course, I'm not lowered, but still....
TamagoOff Grid · Feb 13, 2009#17are we talking front? did you add any negative camber?
y'all just need to quit buying those soft ass DF210s ;)
33OHDover, Ohio · Feb 13, 2009#18Hey, I love my DF210's. I just use 205/40's. =)
Not sure on the offset of my rims, I looked for it once and it just says "Made in Taiwan" on the back.
TamagoOff Grid · Feb 13, 2009#19 Originally Posted by
ryank ↑ Hey, I love my DF210's. I just use 205/40's. =)
Not sure on the offset of my rims, I looked for it once and it just says "Made in Taiwan" on the back.
so to prevent rubbing, you bought a tire that's too small for your car? 🤷
33OHDover, Ohio · Feb 13, 2009#20 Originally Posted by
Tamago ↑ so to prevent rubbing, you bought a tire that's too small for your car? 🤷
And for the looks, but yes.