Yarisworld Archive

harness bars!!!

67 posts · 15,878 views · page 1 of 2

turboyarisOriginal postSouthern New Jersey · Feb 8, 2009#1
Hey guys, I apologize for the wait I know you have all been patiently waiting..... so without further ado, I present to you the harness bar, the test fit was on a sedan, I will be test fitting one on a liftback this week. I plan to sell them uncoated, leaving it up to the owner to powdercoat, I believe this will be easier for those of you wanting to color match your interiors or whatever. If you would like your harness bar powdercoated a standard color like black or silver, I can have that done for you with added cost. I am still finalizing the pricing, but it looks like uncoated the cost will be 200$, if you want yours coated, I will have to find the cost of powdercoating. These should be available the end of this week. The tubing is all 4130 chromoly, Tig welded up. In the pictures you may notice the piece isn't welded, it was just all tacked together to test fitment.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 66

lilredrocketDFW, Texas · Feb 8, 2009#2
😳👍🙌🤘😳 that looks amazing I really want one now!! What about red?
turboyarisThread starterSouthern New Jersey · Feb 8, 2009#3
there is about a milllion different colors of red... you'd probably want to choose yourself... or I could guess which red you want haha
lilredrocketDFW, Texas · Feb 8, 2009#4
ok thanks for the fast reply
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#5
here is a small list of some that you can purchase yourself... its just a place I knew of that had color samples kinda....
http://www.caswellplating.com/powder/powder_colors.html
you can get as crazy as you want to with the candy coats and all that
2006frontySan Bernardino · Feb 9, 2009#6
Now the rear passengers will have an "OH SHIT" bar 😆
TamagoOff Grid · Feb 9, 2009#7
is the mounting tab on the B pillar gonna be more substantial than that?
BLAZINBLUEVITZNEW YORK · Feb 9, 2009#8
what is actual purpose of this bar?
mikenacaratoBrentwood, TN · Feb 9, 2009#9
a harness bar lets you properly attach and use a harness with aftermarket seats. it does at a little bit of rigidity as well.....and i want one. :)
Nexus1155Dorchester · Feb 9, 2009#10
i recommend selling it with some foam padding as another kit, because if you do have passengers ever, and get into an accident, theyre gonna have some missing teeth...

And on the B Pillar, is it just attached to plastic?
cleongSingapore · Feb 9, 2009#11
Is this intended to replace the factory seatbelts? Because if it is, I sure hope you've tested it to see how much weight it'll hold before giving way.

If its also meant to add stiffness to the car as an incidental benefit, this is hardly a full-on rollcage.

Based on what I can see, it does little more than add weight, unless you used large-diameter chromoly tubing throughout firmly welded to the bodyshell.
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#12
its not attached to plastic, it uses the same mounting points as the factory seat belt system. the mounting tab is 3/16" chromoly, I'm not sure how much more substantial you would want it. I won't include any foam to put on the bar... it's not something you can have installed while having passengers in your rear seat, foam or not. You can install it with or without the factory seat belts in place, if you have passengers in your car occasionally, it can be removed with 4 bolts, leaving the brackets in place.
It probably does little to add rigidity, the main purpose is aside from a roll cage, there is no way to attach 4pt harnesses in your car.
jkuchtaL.A. · Feb 9, 2009#13
Very cool bro...thanks a lot for delivering another product for our cars!🙌
TreyzLong Island, NY · Feb 9, 2009#14
Hmmm ... I like :D

Subscribed.
BLAZINBLUEVITZNEW YORK · Feb 9, 2009#15
it's not something you can have installed while having passengers in your rear seat, foam or not. You can install it with or without the factory seat belts in place

unsubscribed.....
mikenacaratoBrentwood, TN · Feb 9, 2009#16
this is really only useful to people who track their cars or want to put in harnesses the correct way and dont have people ride in the back. any date on sales yet, im actually doing a redline time attack this summer and would like to get this AND seats installed before hand.
blacksandiegovitzJust chillin' out brah ! · Feb 9, 2009#17
I'l buy one from you for sure ! I was really hoping you were gonna complete this harness bar project. I cant see any real flaws in design. Do you have a shop to do the powder coating, how much?
cali yarisCanoga Park, CA · Feb 9, 2009#18
he said he is selling them unfinished, but would find out the cost of powdercoating.
whooppee777Maryland · Feb 9, 2009#19
awesome now i'll have a great reason for not being the carpool car. "sorry its impossible to get in the back seats" I LOVE IT!

i'll be getting one in the near future. but not yet
TEHxFALLEN V1.2Calabasas, CA · Feb 9, 2009#20
Hooray!!

I cannot wait to see your finished LB harness bar... and buy one.
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#21
hopefully it will be the same bar, only time will find out... that will make it easier for me and my inventory
TEHxFALLEN V1.2Calabasas, CA · Feb 9, 2009#22
It better fit the LB!! lol
TreyzLong Island, NY · Feb 9, 2009#23
^ x2
mikenacaratoBrentwood, TN · Feb 9, 2009#24
^x3 lolz
anonymous userwindward oahu · Feb 9, 2009#25
This is something all tracked ncp91's should have.
Thank you for designing this.
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#26
if it doesn't fit, rest assured I will have a sedan and liftback model
ChinoCharlesOH · Feb 9, 2009#27
Certified awesome. Thanks man.
TamagoOff Grid · Feb 9, 2009#28
Originally Posted by turboyaris ↑
\the mounting tab is 3/16" chromoly, I'm not sure how much more substantial you would want it.
can you take a close up shot of that tab? i'm curious what is going on there :) very innovative setup!
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#29
Here is the picture of the top brackets
Picture not included in this copy
Picture not included in this copy

Here is the lower ones
Picture not included in this copy


about the only way you could make them more substantial is to weld on triangle gussets to the top bracket. The only problem with that is then you could no longer install the factory seatbelts as well... If you are interested in that, I can do yours like that Tamago. However, remember that the bracket would be weakest bending past 90, but the bracket is also angled downward, so the forces acting on it would essentially have to twist the bend, if that makes any sense.
TamagoOff Grid · Feb 9, 2009#30
Originally Posted by turboyaris ↑
Here is the picture of the top brackets
Picture not included in this copy
Picture not included in this copy

Here is the lower ones
Picture not included in this copy


about the only way you could make them more substantial is to weld on triangle gussets to the top bracket. The only problem with that is then you could no longer install the factory seatbelts as well... If you are interested in that, I can do yours like that Tamago. However, remember that the bracket would be weakest bending past 90, but the bracket is also angled downward, so the forces acting on it would essentially have to twist the bend, if that makes any sense.
i already have a harness bar, i'm playin devil's advocate right now. ;). i'm just curious why you dont weld it solid (do the yarii vary THAT much at the B pillars? Sparco bars are welded solid and don't seem to have fitment issues)

what size bolt are you using to fasten that bracket (upper) and what did you put inside the actual bar tube to thread the bolt into?

don't get me wrong, i'm just asking the questions no one else is asking.. more worried about colors and pads 🤷
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#31
the fastening bolt is a 12mm bolt fine thread grade 8, as that is standard for the seatbelts, it comes with a spacer to facilitate the ability to have the seat belts and harness bar installed together. It is grade 8. the tube end is a extra thick washer .100" thick with a 1/2-20 grade 8 nut welded on the back side, and its all held together by a grade 8 1/2-20 bolt.

This style of tube end is plenty strong, we use it as a engine bay cross brace for late model cars all the time.

As for the difference in B-pillar dimensions, I am unsure, because I haven't had the opportunity to measure a liftback, I imagine they are close in measurement, but it has about 1.5" of difference built in in the unlikely event they are different.
TamagoOff Grid · Feb 9, 2009#32
Originally Posted by turboyaris ↑
the fastening bolt is a 12mm bolt fine thread grade 8, as that is standard for the seatbelts, it comes with a spacer to facilitate the ability to have the seat belts and harness bar installed together. It is grade 8. the tube end is a extra thick washer .100" thick with a 1/2-20 grade 8 nut welded on the back side, and its all held together by a grade 8 1/2-20 bolt.

This style of tube end is plenty strong, we use it as a engine bay cross brace for late model cars all the time.

As for the difference in B-pillar dimensions, I am unsure, because I haven't had the opportunity to measure a liftback, I imagine they are close in measurement, but it has about 1.5" of difference built in in the unlikely event they are different.
good thinking. this means your bar will almost certainly fit the scion xA xB, honda FIT, basically all smaller cars :)

get some donor cars and get these things OUT there!
turboyarisThread starterSouthern New Jersey · Feb 9, 2009#33
Originally Posted by Tamago ↑
good thinking. this means your bar will almost certainly fit the scion xA xB, honda FIT, basically all smaller cars :)

get some donor cars and get these things OUT there!
You read my mind ;) , the only thing that might have to be changed is the little spacer that goes on the seat belt bolt to fit.
cleongSingapore · Feb 10, 2009#34
Just from a safety point of view I hope you're going to test the strength of the setup. For a 100mph car crash its been estimated that a driver experiences anything between 30-100Gs deceleration forces, forces which are concentrated on the attachment points of the harness bars.

For such a safety device it should first and foremost do what its supposed to do. Aesthetics are nice to have, but secondary.
turboyarisThread starterSouthern New Jersey · Feb 10, 2009#35
well assuming those numbers, and the driver being a hefty 200 lbs, the resulting force would be 6,000-20,000 lbs divided in half by the fact that two seat belt fastening points are on the body (for a 4pt harness) would give you an acting force of 1,500-5,000 lbs divide that by the 4 mounting points of the harness bar system and you have an acting force on each bracket of 375-1,250 lbs, and that is negating the fact that the force would be acting to pull the bar forward parallel to the earth, while the harness bars mounting is at angles to that.
TamagoOff Grid · Feb 10, 2009#36
Originally Posted by cleong ↑
Just from a safety point of view I hope you're going to test the strength of the setup. For a 100mph car crash its been estimated that a driver experiences anything between 30-100Gs deceleration forces, forces which are concentrated on the attachment points of the harness bars.

For such a safety device it should first and foremost do what its supposed to do. Aesthetics are nice to have, but secondary.
100mph car crash and without a HANS device, the driver will lose his head.. harness bar won't even be an issue at that point..

thank god it takes a good 2 and a half minutes to get to 100mph in a yaris :D
turboyarisThread starterSouthern New Jersey · Feb 10, 2009#37
aw tamago, where is your desire to solve things mathematically
cleongSingapore · Feb 10, 2009#38
Originally Posted by Tamago ↑
100mph car crash and without a HANS device, the driver will lose his head.. harness bar won't even be an issue at that point..
That's quite conjectural, as an F1 driver (David Purley) back in '77 survived a 180g impact, this is way before HANS were commonplace, or even invented:

He survived an estimated 179.8 G's in 1977 when he decelerated from 173 km/h (108 mph) to 0 in a distance of 66 cm (26 inches)
jkuchtaL.A. · Feb 10, 2009#39
I think the harness bar will survive anything the rest of the driver's compartment will survive.

Slowing from 108 mph to 0 in 26 inches in a yaris without a full rollcage would be unsurvivable IMHO, no matter what restraint system was used. The front end of the car would intrude into the driver's compartment too far.
cleongSingapore · Feb 10, 2009#40
I'm not asking for a 100mph crash test, perhaps we're going off on a tangent here.
That being said, I have seen almost 100mph on my local track at the end of a 2200+ ft straight. And no, it didn't take two and a half minutes.

So long as a harness bar is at least as strong as the original seatbelts were I suppose that is good enough. Euro NCAP usually tests at only 40mph, though.
turboyarisThread starterSouthern New Jersey · Feb 10, 2009#41
Originally Posted by kustom play ↑
i wonder if this will have the same issue the TC and XB had where the pillars the harness bar was attached to started to cave in after some time
by this, do you mean that over time the chassis of the tc and xb began to flex causing the B pillars to come closer together? If that is the case, this bar should help that, as it would continuously be holding it at the dimensions it is installed in, if your car has already had this "dimension change" that is the reason for the slot in the brackets, to allow for slight differences in chassis measurements


Oh and tamago, it looks like the hatchback is 3/4" wider at the B-pillar, or at least thats what the collision section of the factory repair manual says, page DI-5 and DI-8 measurement J-j is the measure from the top of the B-pillars, I will have to double check on a actual liftback.
rob323Joyner, Brisbane · Feb 15, 2009#42
Turboyaris, I have a small concern about the design, I will pm you.
cali yarisCanoga Park, CA · Feb 15, 2009#43
Why not post it so we can all hear your concern?
TamagoOff Grid · Feb 15, 2009#44
Originally Posted by rob323 ↑
Turboyaris, I have a small concern about the design, I will pm you.
as do i. but no one wants to hear that.. they just want to know what colors they'll be available in.... well.. besides Garm that is.. 🤷
rob323Joyner, Brisbane · Feb 15, 2009#45
Nah, my concerns might be totally unfounded in which case it would just be pointless clutter and not beneficial to the thread.
TamagoOff Grid · Feb 15, 2009#46
Originally Posted by rob323 ↑
Nah, my concerns might be totally unfounded in which case it would just be pointless clutter and not beneficial to the thread.
so only positive comments are beneficial to the thread?
turboyarisThread starterSouthern New Jersey · Feb 15, 2009#47
haha I take all concerns, I would like to know yours Tamago,

Robs concern was just in the design and in possibly adding an extra pair of legs, but as I informed him, I didn't believe that it would be a neccessary as I feel the unit would be strong enough to hold up. as many companies have a similar design.

Tamago, was yours just in the design of the upper bracket?
TamagoOff Grid · Feb 15, 2009#48
Originally Posted by turboyaris ↑

Tamago, was yours just in the design of the upper bracket?
yes, still concerned with that L bend..
turboyarisThread starterSouthern New Jersey · Feb 18, 2009#49
hmm thats interesting... The only thing i can think of, is that if the bracket and the bar were welded together, as sparco's are, that possibly they were too small, and the customer just wrenched on the bolts and the bar would probably be stronger then the b pillars, he himself might have done it... I don't know, merely speculation
TamagoOff Grid · Feb 18, 2009#50
why not adopt a plate like this... much stronger

you could always shim the bar for the "wider" b pillar configurations

Picture not included in this copy