Yarisworld Archive

Custom Turbokit

59 posts · 28,083 views · page 1 of 2

Replies 58

jinxorSydney, Australia · Feb 8, 2009#2
Nice setup mate.... especially i love that twin tip exhaust.... wait more like a quadro setup... lolz

just wondering what is the cylinder next to the coilovers is for?
GideonSunnyvale, CA · Feb 8, 2009#3
Originally Posted by jinxor ↑

just wondering what is the cylinder next to the coilovers is for?
I think that's some sort of electric dampening adjustment for the coilovers, so you can do it from within the car cabin.

Could be completely wrong though. 😆
PETERPOOPOahu · Feb 9, 2009#4
coilover reservoir
jinxorSydney, Australia · Feb 9, 2009#5
and isnt it supposed to be "CUSTOM" and not "CUTSOM" in the title"???
🤷 🤷
Kaotic LazagnaCentral Valley, CA · Feb 9, 2009#6
Holy crap that is one nice Vios!
PETERPOOPOahu · Feb 9, 2009#7
BTW, im so jealous!
eiiLong Beach, CA · Feb 9, 2009#8
Hazzah sedan turbo! I wanna see better angles of the exhaust while the car is on the ground.
1nzThread starterBrunei · Feb 9, 2009#9
Originally Posted by jinxor ↑
and isnt it supposed to be "CUSTOM" and not "CUTSOM" in the title"???
🤷 🤷
Typo error, dont know how to change it hehe
jinxorSydney, Australia · Feb 9, 2009#10
lolz... its alrite... dont worry about it....
nice vios tho... any dyno sheets mate?
cali yarisCanoga Park, CA · Feb 9, 2009#11
here you go:

Picture not included in this copy
thebarberGrand Rapids, MI · Feb 9, 2009#12
not bad for 6psi on what looks to be an automatic transmission
cali yarisCanoga Park, CA · Feb 9, 2009#13
50 whp gain? Hell yeah!!
PHXDEMONPhoenix, AZ · Feb 9, 2009#14
That exhaust is badass. I wonder if they were able to properly tune it 🤷
jinxorSydney, Australia · Feb 9, 2009#15
that is truely impressive....
Thej3sta2Orlando, FL · Feb 10, 2009#16
how much was the brake kit
LtNoogieWest Hills, CA · Feb 10, 2009#17
Did you see the intercooler, AT cooler, and oil cooler crammed in there? Daaaamn nice.
changchewsoonMalaysia · Feb 19, 2009#18
erm, that's my car guys. didn't know it actually appeared here until someone from brunei compact tuner told me about it.

do let me know if you guys need any info, i'll try my best to share!
1nzThread starterBrunei · Feb 19, 2009#19
what oil cooler, atf cooler and intercooler are you using? Still using the emanage blue?
changchewsoonMalaysia · Feb 19, 2009#20
I sourced the intercooler from an Evo 3, the oil cooler is from ASR Performance and the ATF cooler from a Mitsubishi Pajero.

Yah I'm still using E-Manage blue for now, it is able to handle 2 extra injectors which is just nice for the turbo.
1nzThread starterBrunei · Feb 28, 2009#21
strange, i was told that the ecu will relearn over the emanage blue, custom wiring of plug and play?
cali yarisCanoga Park, CA · Feb 28, 2009#22
I think we only know that for sure with USDM cars.
changchewsoonMalaysia · Mar 28, 2009#23
Originally Posted by 1nz ↑
strange, i was told that the ecu will relearn over the emanage blue, custom wiring of plug and play?
i'm not using any plug and play harness, splicing wirings directly.
PHXDEMONPhoenix, AZ · Mar 28, 2009#25
Nice torque 😎
changchewsoonMalaysia · Mar 29, 2009#26
thanks, its great to be part of the forum and getting know and see so many of us doing great things with the car!
Kaotic LazagnaCentral Valley, CA · Mar 29, 2009#27
I'd love those numbers. Enough torque to get going with a full load in the car, and enough power to not bog down when the A/C with that full load in car is in use.
cali yarisCanoga Park, CA · Mar 29, 2009#28
143 whp @ 8.5 psi
Kaotic LazagnaCentral Valley, CA · Mar 29, 2009#29
Originally Posted by cali yaris ↑
143 whp @ 8.5 psi
Wasn't it 8.8 psi? I'm still a total noob in FI, but isn't that pushing too much for the stock internals?
changchewsoonMalaysia · Mar 29, 2009#30
Well I personally feel that this is very subjective as other various factors come in to play such as tuning, fuel used etc. Some would feel that 5 psi is as far as they would push, some 7 psi, some 10.

In our country, we have an option of either using RON 97 or RON 99 unleaded fuel which helps a lot to reduce detonation and ping.

My pistons are ceramic coated and the engine compression has been lowered to a 9.5:1 compression ratio. I do agree if budget permits, forged rods and pistons definitely is the way to go.

Just to share, we have a few Turbo Vios here whose running 14 psi all year long on stock engine and stock automatic transmission for the past 3 years, and the only issue they've encountered so far was fried piston rings. The rest of the engine and transmission is holding strong.

I think they're really insane, but in reality there are people out there who does it.
Kaotic LazagnaCentral Valley, CA · Mar 29, 2009#31
hahahaaha. If I were to ever have your set up, I wouldn't even get to 8psi. It only gets there at WOT, right? I drive very conservatively, so I'm not even sure if I'll even be making boost. hahaha.
changchewsoonMalaysia · Mar 31, 2009#32
careful driver huh? yah thats good man, I'm also learning not to go WOT every single time. gotta take care of the fuel efficiency at the same time as well.

my current setup allows me to reach 8 psi in less than 3,000 RPM on WOT, on highway cruising the turbo will be reaching maximum boost even with partial throttle so yah i gotta learn to drive conservatively.
changchewsoonMalaysia · Jun 21, 2009#33
Car awaiting coilovers to be serviced, and the following mods will go in.

1. Okada coils
2. AEM water/methanol injection kit

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Hopefully the coilovers can come back soon so the car can be tuned on the dyno. Charts will be up soon.
Nexus1155Dorchester · Jun 21, 2009#34
Nice update! the meth injection will help tons, hopefully you have the ignition harness to increase spark so the meth injection will be more worth while... Maybe you can prove the Okada coils are good for higher spark... one user here had a similar product and one blew out on him on a stock car.
changchewsoonMalaysia · Jun 22, 2009#35
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

The FIC injectors cleared customs yesterday and arrived this afternoon while I was away in the office.

Together with the forged internals when they arrive, we should able to make some serious power when we crank up the boost.
changchewsoonMalaysia · Jun 26, 2009#36
The dyno results for the Okada Projects Plasma Direct coils is finally out, the results are more than what we expected as the dyno machine was able to pick up the gains both in horsepower and torque.

It took us less than 10 minutes to swap the coils and we took this opportunity to throw in a new set of plugs.

Picture not included in this copy
Autolite Iridium plugs

We did a base run and the car pulled 143.34 PS and 18.53 kg-m of torque at the wheels. With the Okada Projects coils fitted in, it gave us 153.01 PS and 19.45 kg-m of torque.

Picture not included in this copy
Blue: Without Okada coils
Red: With Okada coils

A first glance at the dyno chart it seems like the overall gains is not so impressive as we only gained around 9.67 PS and 0.92 kg-m of torque.

However we noticed that the gains are available throughout the entire powerband starting from 3,000 RPM all the way to the redline.

What caught us by surprise was not only the torque curve has been flatten, there is a peak gain of 14.22 PS and 2.02 kg-m of torque nearing the 5,000 RPM range.

In the past, the original coils simply just couldn't maintain sparks that were strong enough at the high RPM range to achieve a flatter torque curve. Seems like the Okada coils were able to get the job done.

Picture not included in this copy
Peak gain of 2.02 kg-m torque

Picture not included in this copy
Peak gain of 14.22 PS

Overall I'm quite impressed with the Okada coils, and would certainly recommend it to anyone whose interested in it. However, you would still need to find a good tuner who knows how to tune your car properly in order to enjoy the gains.

Besides the gain in power, the coils could also serve as a nice dressing item in your engine bay as well.

Picture not included in this copy
CASTREXCosta Rica · Jun 26, 2009#37
Nice... good info.


And what's the price tag on those fancy coils? 😳
changchewsoonMalaysia · Jun 29, 2009#38
i bought them for around USD 750 after conversion, the shipping price was included.
TrumanpriestSt. Louis · Jul 8, 2009#39
Those are the rims I want Gram Lights T57-RC. If only I could drop 1k on rims right now!!! Tirerack has them on clearance for 250 a piece.
changchewsoonMalaysia · Jul 9, 2009#40
glad you like them 👍
changchewsoonMalaysia · Jul 20, 2009#41
they arrived couple of days ago

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
scapeBeaufort, South Carolina · Jul 20, 2009#42
Originally Posted by changchewsoon ↑
they arrived couple of days ago
🤤
PHXDEMONPhoenix, AZ · Jul 22, 2009#43
mmmm pistons.
changchewsoonMalaysia · Aug 23, 2009#44
the bearings and head bolts arrived yesterday.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Aug 23, 2009#45
Nice.
cali yarisCanoga Park, CA · Aug 23, 2009#46
compression ratio?
changchewsoonMalaysia · Aug 23, 2009#47
i suppose you were referring to the compression ratio for the pistons?

they are 9.0 pistons.
changchewsoonMalaysia · Sep 26, 2009#48
They arrived a couple of days ago.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
lilredrocketDFW, Texas · Sep 26, 2009#49
Car porn!!! Looks like your on your way to a nice setup there
PETERPOOPOahu · Sep 26, 2009#50
sexy snail baby