TitaniumBarbellOriginal postPuerto Rico · Feb 8, 2009#1Hi to everybody!
Recently, I bouth an Replacement Yaris S 2008 wheels. Today, I bought Genuine Toyota Center Caps (part number: 42603-52110) to install on the wheels, but I broke one of this because I need to use the wood holder of a Hammer, and Kaboom!
Is too difficult to put these center caps on wheels. Have you any tricks for this?
Thanks (sorry for my english). 👎
Replies 10
CTScottUSA, CT · Feb 8, 2009#2 Originally Posted by
TitaniumBarbell ↑ Hi to everybody!
Recently, I bouth an Replacement Yaris S 2008 wheels. Today, I bought Genuine Toyota Center Caps (part number: 42603-52110) to install on the wheels, but I broke one of this because I need to use the wood holder of a Hammer, and Kaboom!
Is too difficult to put these center caps on wheels. Have you any tricks for this?
Thanks (sorry for my english). 👎
Use a rubber mallet.
Picture not included in this copy MadMaxSan Antonio, Texas! · Feb 9, 2009#3 Originally Posted by
CTScott ↑ Gently use a rubber mallet.
Added a little emphasis for ya!
Cheers! M2
Danish YarisCopenhagen, Denmark · Feb 9, 2009#4Hi
Normally they are pretty easy to put in place, could it be that the center hole in the aftermarket wheels are a bit smaller than the OE wheels so they don´t fit properly.
Regards Steven.
TamagoOff Grid · Feb 9, 2009#5use the palm of your hand. or put a block of wood over the entire cap and tap THAT with a hammer.
YarisSedanCalifornia - Bay Area · Feb 9, 2009#6I used to work at a tire shop. Usually consisted of us making a fist and making a quick swift pound with the side of your fist and it pops in place.
cali yarisCanoga Park, CA · Feb 9, 2009#7LOL @ the rubber mallet
but good advice
ChinoCharlesOH · Feb 9, 2009#8It is a lot easier to put them on when the wheels aren't on the car too.
IllusionXBrossard, QC · Feb 9, 2009#9mine just pops in from the tip of my index. and pops out with my thumb.
ddongbaphay · Feb 9, 2009#10Center caps? What? Don't those just push in with a finger?
1NZYaris1New Zealand · Feb 9, 2009#11 Originally Posted by
TitaniumBarbell ↑ Hi to everybody!
Recently, I bouth an Replacement Yaris S 2008 wheels. Today, I bought Genuine Toyota Center Caps (part number: 42603-52110) to install on the wheels, but I broke one of this because I need to use the wood holder of a Hammer, and Kaboom!
Is too difficult to put these center caps on wheels. Have you any tricks for this?
Thanks (sorry for my english). 👎
Pictures PLEASE.
👍