Yarisworld Archive

Scion xd turbo

22 posts · 25,893 views

Replies 21

TamagoOff Grid · Feb 8, 2009#2
252 whp and he runs 14's ?

weak
BLAZINBLUEVITZNEW YORK · Feb 8, 2009#3
that was at 10 psi. it also says at 12 psi and with 17's on he ran a 13.3@108.67.....
cali yarisCanoga Park, CA · Feb 8, 2009#4
Tamago, you never cease to amaze. Props to the guy for boosting and going faster.
TamagoOff Grid · Feb 8, 2009#5
Originally Posted by cali yaris ↑
Tamago, you never cease to amaze. Props to the guy for boosting and going faster.
agreed, props. that's a lot of power
ChinoCharlesOH · Feb 8, 2009#6
Originally Posted by BLAZINBLUEVITZ ↑
that was at 10 psi. it also says at 12 psi and with 17's on he ran a 13.3@108.67.....
THAT is quick.
CASTREXCosta Rica · Feb 9, 2009#7
Yeah that's quick... but the engine blowed up.

So no, is not a good example of tuning.

That is a Puerto Rican xD with a gettho turbo set up. There were 2 of those put togeather by the same person

This guy ran his car with no tunning or engine management and took it up to 12 psi. It lasted just a few months. The engine is currently down with waiting for full rebuilt.

For the fuel this guy used larger injectors (TC) plus a 5th injector set up using a Mustang 5th injector.
cali yarisCanoga Park, CA · Feb 9, 2009#8
This guy ran his car with no tunning or engine management and took it up to 12 psi. It lasted just a few months.
Like any hot affair, I'm sure the few months was memorable. 😁
YamilRSan Diego, CA · Feb 9, 2009#9
Originally Posted by CASTREX ↑
Yeah that's quick... but the engine blowed up.

So no, is not a good example of tuning.

That is a Puerto Rican xD with a gettho turbo set up. There were 2 of those put togeather by the same person

This guy ran his car with no tunning or engine management and took it up to 12 psi. It lasted just a few months. The engine is currently down with waiting for full rebuilt.

For the fuel this guy used larger injectors (TC) plus a 5th injector set up using a Mustang 5th injector.
And all this time I thought they were Japanese
TamagoOff Grid · Feb 9, 2009#10
Originally Posted by YamilR ↑
And all this time I thought they were Japanese
🙄
RagnaCaTVillalba, Puerto Rico · Feb 9, 2009#11
LOL typical Puerto Rico stuff! WOW a blown engine that like happens every tuesdays and thursdays at streets.... I love this place!
06silveryarisPuerto Rico · Feb 10, 2009#12
Originally Posted by RagnaCaT ↑
LOL typical Puerto Rico stuff! WOW a blown engine that like happens every tuesdays and thursdays at streets.... I love this place!
so true, back yard specials at the limit and the best thing after it blows up they are back next week ready and lighting up the tire all the way thru 3rd gear.
PARISThread starterATHENS KALLITHEA · Feb 13, 2009#13
Originally Posted by CASTREX ↑
Yeah that's quick... but the engine blowed up.

So no, is not a good example of tuning.

That is a Puerto Rican xD with a gettho turbo set up. There were 2 of those put togeather by the same person

This guy ran his car with no tunning or engine management and took it up to 12 psi. It lasted just a few months. The engine is currently down with waiting for full rebuilt.

For the fuel this guy used larger injectors (TC) plus a 5th injector set up using a Mustang 5th injector.
So he was irrelevant with the cars tuning! When you turbocharge a car you must fully build the engine and have a new ECU or reprogramme the stock ecu . Am i right?
TamagoOff Grid · Feb 13, 2009#14
Originally Posted by PARIS ↑
So he was irrelevant with the cars tuning! When you turbocharge a car you must fully build the engine and have a new ECU or reprogramme the stock ecu . Am i right?
no. you don't need to build the engine

yes, you should figure out some way to add fuel and remove timing
CASTREXCosta Rica · Feb 13, 2009#15
Originally Posted by PARIS ↑
So he was irrelevant with the cars tuning! When you turbocharge a car you must fully build the engine and have a new ECU or reprogramme the stock ecu . Am i right?
There is alot to be concidered and must all depends on the power levels you want to achive.

For lets say 5psi he can probably would get away with no tuning, perhaps just bigger injectors.

For 5psi - 10psi you will need some form of Fuel / timing tuning.

For 12-14psi (that's what he was pushing) probably you should be looking for some forged rods and lower comp pistons.
CASTREXCosta Rica · Feb 13, 2009#16
But some good info came from this guys experience...

This engine the 2ZR-FE seems to have some really good flow characteristics as initially this dude made 210Whp on only 8psi
This is from an engine that pushes around 115-118 whp stock.

Also, this guy took the boost up and didn't break anything... And he was drag racing and really pushing the car. That says something about the internals...

It looks like this engine could easly handle 10psi of boost, 230whp all day long.
That is with a good tune OBVIOUSLY!!!

That would make one hell of a Daily driver won't you think?
PARISThread starterATHENS KALLITHEA · Feb 13, 2009#17
Originally Posted by CASTREX ↑
But some good info came from this guys experience...

This engine the 2ZR-FE seems to have some really good flow characteristics as initially this dude made 210Whp on only 8psi
This is from an engine that pushes around 115-118 whp stock.

Also, this guy took the boost up and didn't break anything... And he was drag racing and really pushing the car. That says something about the internals...

It looks like this engine could easly handle 10psi of boost, 230whp all day long.
That is with a good tune OBVIOUSLY!!!

That would make one hell of a Daily driver won't you think?
I have heard that the 2ZR FE is a stronger engine than its procedesor. It has a little bit enforced block and moving internals than the 1ZZ!! It is different than the other vvt-i's it can be tuned more easily.....
PHXDEMONPhoenix, AZ · May 6, 2009#18
Originally Posted by RagnaCaT ↑
LOL typical Puerto Rico stuff! WOW a blown engine that like happens every tuesdays and thursdays at streets.... I love this place!
😆😆 Car enthusiasts are fucking nuts in puerto rico.
ChinoCharlesOH · May 7, 2009#19
I don't know whether to smile or cry right now, but 13.3 @ 108 is pretty cool. Tranny drop FTW.
TamagoOff Grid · Feb 24, 2010#20
i wonder how this car's doing these days
misformartinsocal · Feb 25, 2010#21
maybe someone can shed some light... i know that the guy in puerto rico is using a 1zz exhaust mani for his turbo build any idea on if the 1zz intake manifold will bolt up? cuz if so a 1zz supercharger would be a probable option
YarisPRMayaWest, Puerto Rico · Feb 26, 2010#22
Originally Posted by Tamago ↑
i wonder how this car's doing these days
Its no longer Turbo!!!! he went 2ZZ 😁 along with 2 more 2zz Yaris & 1 2ZZ xA (not the new one) 😈 🍻