Im installing my newly acquired df210's (thanks again Sabretooth!) ....my question is.....is it absolutely necessary to cut the bump stops? 🤷
df210s...
20 posts · 11,247 views
Replies 19
yes, cut off the portion "above" the plastic collar and use that part only. you can always save the part you cut off and re-install later if you go back to stock and so desire.
bump steer ftL
cut those stops
cut those stops
bump steer is not caused by bump stopsOriginally Posted by thebarber ↑bump steer ftL
cut those stops
http://en.wikipedia.org/wiki/Bump_Steer
ah, well there ya go, learn something new every day...Originally Posted by Tamago ↑
Yes, you should cut the bumpstop. On any car, if you lower it.
god bless wiki :)Originally Posted by thebarber ↑ah, well there ya go, learn something new every day...
not true.. TRD shocks and springs u dont cut the bump stops... says nothing of that in the installOriginally Posted by Nagoya_TRD. ↑Yes, you should cut the bumpstop. On any car, if you lower it.
ah well did it anyway......took me 4 hours....too much blood a little sweat and a few tears of fury. I am not touching those things for a very very long time. Looks amazing.....but not touching them for a long time. Pictures when the anger of the install fades.....
did you pull the wiper tray out?Originally Posted by at3GG ↑ah well did it anyway......took me 4 hours....too much blood a little sweat and a few tears of fury. I am not touching those things for a very very long time. Looks amazing.....but not touching them for a long time. Pictures when the anger of the install fades.....
i had to to do mine. it sucked. :(
wiper tray comes out in like 10mins, what's the big deal?Originally Posted by mikenacarato ↑i had to to do mine. it sucked. :(
I didn't think it was a bad install, and I'm hardly a mechanic.
yup took the wiper piece off. Real problem was the nuts on top of the strut underneath the wiper piece. Took forever to get an angled wrench that would work. Just a lot of slips and knicks and cuts
i didnt cut my bumpstops, will it cause problems?
^^what shocks and springs do u have
if you have to do it again, the easy thing to do is pick up a set of "hollow sockets"Originally Posted by at3GG ↑yup took the wiper piece off. Real problem was the nuts on top of the strut underneath the wiper piece. Took forever to get an angled wrench that would work. Just a lot of slips and knicks and cuts
it's a 17mm socket. that way you can put the allen down thru the middle.
or you can use an impact gun to remove 😁 that's the eeeeeasy way out
http://www.lowes.com/lowes/lkn?actio...399&lpage=none
something like that kit will ROCK your world.
heh used an impact for other parts of this project.....it was....nice. BUt wouldnt fit for the upper nut
ahh ok yeah actually now that i think about it.... i still got the NF210 rear springs. lol took um out of the 07 before they towed it off my driveway when i totaled itOriginally Posted by ZING ↑Just NF210's.