Yarisworld Archive

Up to date

132 posts · 31,869 views · page 2 of 3

Replies continued

PETERPOOPThread starterOahu · Feb 19, 2009#51
Well I believe it's for the 1.8 engine only.

DD: Daily Driver.
808_YarisHI · Feb 19, 2009#52
i see. i used to have my scion tc, and toyota tacoma (work truck). But now i'm only left with my yaris hahaha.
PETERPOOPThread starterOahu · Feb 19, 2009#53
What are you going to do while your car is being worked on?

What do you do for work if you don't mind me asking. I work construction.
808_YarisHI · Feb 19, 2009#54
plumb the pipes. I usually drive the company vehicle. is your car a DD?
PETERPOOPThread starterOahu · Feb 19, 2009#55
oh nice, are you a contractor or a journeyman?
808_YarisHI · Feb 19, 2009#56
haha not my time yet, still young :)
PETERPOOPThread starterOahu · Feb 19, 2009#57
go on aim!
808_YarisHI · Feb 19, 2009#58
shoots
gwasabiHonolulu, Hawaii · Feb 19, 2009#59
Dude.....I just got a straight pipe from the first cat and back man.....its fucking loud....like getting ticket kind loud....and I LOVE IT!!!
808_YarisHI · Feb 19, 2009#60
lol like sound the alarms loud?
PETERPOOPThread starterOahu · Feb 19, 2009#61
Originally Posted by gwasabi ↑
Dude.....I just got a straight pipe from the first cat and back man.....its fucking loud....like getting ticket kind loud....and I LOVE IT!!!
ahaha oh no
gwasabiHonolulu, Hawaii · Feb 19, 2009#62
lol Honestly it sounds like a civic and its only the first part of my exhaust project. I'm still deciding on a can for it....I just wanted to up the piping up to 2.5 instead of our small 1.75
PETERPOOPThread starterOahu · Feb 19, 2009#63
wow, 2.5"? You aren't losing any power like that since you aren't boosted and all? I heard to go with 2.25" even when you are boosted with blitz and small boost kits.

So what muffler you using now that your greddy axleback is off and up for sale?

*Make a video of your car so we can hear!
gwasabiHonolulu, Hawaii · Feb 19, 2009#64
it oesn't feel like i lost TOO much power. Just a little when I'm picking up from stop but once it gets going its still pulling. I think the Throttle Body is what makes the big difference in the higher rpm.....now if I can get some traction damnit!
PETERPOOPThread starterOahu · Feb 19, 2009#65
Wait, so no muffler, isn't that illegal
yarisugiハワイ · Feb 19, 2009#66
808Yaris, you gonna get the Air Runners installed at Revision or somewhere else?
gwasabiHonolulu, Hawaii · Feb 20, 2009#67
i dont know but no cat is illegal......but i still have a cat left ^_^ but i think if i do get busted i'd get busted i'll get busted for noise pollution.....btw I just ordered my new shoes!!! It's a secret till i get it hehehe you know how it is peter! lol you'll just have to wait and see.....mean while here is the picture of my exhaust.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
808_YarisHI · Feb 20, 2009#68
Originally Posted by yarisugi ↑
808Yaris, you gonna get the Air Runners installed at Revision or somewhere else?
I'm getting it done at revision. talked to the guy and mine should arrive in a couple weeks.
yarisugiハワイ · Feb 20, 2009#69
Yummy! I wanna see how low those Air Runners can go. I've never had a bagged vehicle
so it sounds pretty tempting :)
PETERPOOPThread starterOahu · Feb 20, 2009#70
I hope you got the cash for it too. ;)
808_YarisHI · Feb 21, 2009#71
Anyone know of a legit place to buy carbon fiber adhesive sheets?
-besides ebay
gwasabiHonolulu, Hawaii · Feb 22, 2009#72
i thought micro image had some?
808_YarisHI · Feb 22, 2009#73
Originally Posted by gwasabi ↑
i thought micro image had some?
I don't think its real carbon fiber. I think they have the carbon fiber look sheets. Plus I think the price for CF on micro image is a little higher than what I'm looking for. With the amount of carbon fiber I want, I think it's going to be a bit pricey.😕
PETERPOOPThread starterOahu · Feb 22, 2009#74
You plan on letting us know what you're going to do with all these sheets of CF? :)
808_YarisHI · Feb 23, 2009#75
Originally Posted by PETERPOOP ↑
You plan on letting us know what you're going to do with all these sheets of CF? :)
it's a suprise 🙄
gwasabiHonolulu, Hawaii · Feb 23, 2009#76
y dont u just buy the CF material and resin it onto the material itself then jell coat or clear coat it? that's probably the best way to get a better fit
808_YarisHI · Feb 23, 2009#77
Originally Posted by gwasabi ↑
y dont u just buy the CF material and resin it onto the material itself then jell coat or clear coat it? that's probably the best way to get a better fit
too much work and the smell is also bad. i'll work something out i guess..
PETERPOOPThread starterOahu · Feb 23, 2009#78
There's gotta be a guy who does professional custom CF in oahu somewhere! My friend's friend is just starting to do some CF peices. If he ever gets good, i'll let you know.

ps: I'm tired of your guys "it's a secret"! Killing me
yaris-meAnaheim, CA · Feb 24, 2009#79
Originally Posted by 808_Yaris ↑
Anyone know of a legit place to buy carbon fiber adhesive sheets?
-besides ebay
http://www.dragonplate.com/👍
808_YarisHI · Feb 24, 2009#80
Originally Posted by yaris-me ↑
thanks, found that site already. I'm going to see the difference between the ebay carbon fiber I picked up, and this site.
gwasabiHonolulu, Hawaii · Feb 25, 2009#81
I actually have a friend that does CF work and I'm planning to get some CF work done soon......and like always its a Secret Peter!
gwasabiHonolulu, Hawaii · Feb 25, 2009#82
Oh btw I'm just gonna pop the greddy back on with a silencer if anything
gwasabiHonolulu, Hawaii · Feb 26, 2009#83
Updating from Mac store woots! hahahaha Just went to get my Greddy Muffler back on. no cat and no resognator! YEA!!! alot quiter but still has a loud enough growl to it. I'll make some videos soon of my straight pipe with muffler and one cat hahaha
PETERPOOPThread starterOahu · Feb 26, 2009#84
hurry up and make videos man!
gwasabiHonolulu, Hawaii · Mar 1, 2009#85
Reposted from our Hawaii section hahaha.

Picture not included in this copy

Thats the link to my first Vid

Picture not included in this copy

thats the link to my second vid.......

I'm using my phone so it's not the best quality...sound came out alright....the second time the phone fell over hahahahaha


My impression of the straight pipe after a week is that it loses power in the lower end RPM but once you get it up to speed it picks up pretty quick. From stop it's a little rough on the clutch. Sometimes I tend to stall out if I don't rev quick enough. I figure that a NST crank pulley set will balance things out.

This is a Secondary Cat & Resognator delete setup with the Greddy Ti-C muffler chopped and rewelded onto a 2.5' pipe. Straight back over axle mandrel bent.
gwasabiHonolulu, Hawaii · Mar 1, 2009#86
repost from the sightings section hahaa
PETERPOOPThread starterOahu · Mar 4, 2009#87
Well here are some things I have purchased and will be receiving in the VERY near future:

Blitz S/C kit
NST Crank lite pulley (pulley used for S/C application)
Megan Header
o2 anti foul sensor
NGK Iridium IX spark plugs 2667


I am also going to get a magnaflow muffler (still deciding which one), and a resonator. Then I will run a 2.25" downpipe from the Megan headers to the resonator, then continue to the 2.25" magnaflow muffler. Both cats will be gone. Free flow baby!

I also need to find out where the cheapest place to purchase Lucal Oil. I will be mixing this in with every fill up I do now. It will prevent the pre-ignition!
gwasabiHonolulu, Hawaii · Mar 4, 2009#88
Why u gonna get a resognator or muffler? thats not freeflow.....it's just gonna create more resistance. You don't need resognator just a muffler will do. It's not super loud. I'm running without a resognator and my muffler is just fine.
PETERPOOPThread starterOahu · Mar 4, 2009#89
LoL. I do NOT trust your opinion on what is loud and what's not. You were driving around with no muffler and one cat deleted and you LOVED it! Those were your exact words. Sean from munkey wurks said it was louder than any honda he's ever heard.

I am going to use a resonator because it will dampen the sound without restricting the flow. No worries beef curries.

I just called exhaust systems hawaii. That place is horrible. Their customer service is trash. They guy was saying they charge around 40-50$ per bend for mandrel bends. I need to locate other shops.
gwasabiHonolulu, Hawaii · Mar 4, 2009#90
TOLD YA! I don't think you'd think my exhaust setup is loud right now.....and yea I did agree with sean about the straight pipe. I loved it but its still loud lol. Anyway if you want to hear my exhaust setup then we can setup a meeting. Also ALL resognators will restrict flow.....like i said, you don't need one. At most not having one will make your car sound about 5-10% louder...

in my opinion my TiC without the resonator has a lower and nicer tone than when I had it with the resonator

but dont let me tell you what to do lol it's just my 2 cents and I know nothing about cars lol
PETERPOOPThread starterOahu · Mar 4, 2009#91
We SHOULD meet up, but maybe in acouple of weeks. This weekend i have to do a stupid school project and install the S/C. And in between that i have homework/school/work. But yah, i will meet up with you before I get my exhaust set up done, for sure!

TRUST ME, if i don't need the resonator, i don't want it. That's just more money to buy it and have them weld it on!
gwasabiHonolulu, Hawaii · Mar 4, 2009#92
Yup yup just let me know. Just trying to help a buddy out man. Sounds better in person
PETERPOOPThread starterOahu · Mar 4, 2009#93
We'll only meet up if you wear that outfit from those pictures in the other thread.
gwasabiHonolulu, Hawaii · Mar 4, 2009#94
I KNEW YOU SWANG THAT WAY!
PETERPOOPThread starterOahu · Mar 4, 2009#95
hah definately not you sick freak!
808_YarisHI · Mar 10, 2009#96
down payment down the drain 😈
PETERPOOPThread starterOahu · Mar 10, 2009#97
What do you mean?
808_YarisHI · Mar 10, 2009#98
Haha just kidding! Estimated time as of today 1-2 months arrggghhh
PETERPOOPThread starterOahu · Mar 10, 2009#99
megan header came in today! chee
BLAZINBLUEVITZNEW YORK · Mar 10, 2009#100
Originally Posted by PETERPOOP ↑
megan header came in today! chee
so you are still running stock header? just curious and thinking after seeing that video.im still thinking of that whine.....