Yarisworld Archive

Help! I broke my engine!

55 posts · 30,188 views · page 1 of 2

CtrlAltDefeatOriginal postIndianapolis IN · Feb 1, 2009#1
After installing my NST underdrive pulley I was trying to move the alternator back into position to re-tension the belt when the rubber mallet I was using slipped and broke the connector off of this thing mounted to the block just above and to the right of the alternator! I took it out to take get a better look at it... Does any one know what this is? It looks like some sort of solenoid or valve with oil all over the end that goes in the block.I was able to straighten the tabs and push the broken piece back together but there were to tiny wires that I think were broken... The engine started after I put everything back together, but the check engine light came on... I hope what ever it is, it's not expensive, because I'm pretty sure it's not covered by warranty...
broken.jpgbroken2.jpg

Replies 54

eTiMaGoBangkok, Thailand · Feb 1, 2009#2
I believe that is related to the VVT-i system, an activator of sorts.
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#3
any idea how much it costs?
eTiMaGoBangkok, Thailand · Feb 1, 2009#4
no idea, dude... tried to track down the part number but no luck
Yaweshlong island · Feb 1, 2009#5
Originally Posted by CtrlAltDefeat ↑
After installing my NST underdrive pulley I was trying to move the alternator back into position to re-tension the belt when the rubber mallet I was using slipped and broke the connector off of this thing mounted to the block just above and to the right of the alternator! I took it out to take get a better look at it... Does any one know what this is? It looks like some sort of solenoid or valve with oil all over the end that goes in the block.I was able to straighten the tabs and push the broken piece back together but there were to tiny wires that I think were broken... The engine started after I put everything back together, but the check engine light came on... I hope what ever it is, it's not expensive, because I'm pretty sure it's not covered by warranty...
oh boy, does the car still drive? maybe you can try disconnecting battery overnight, it could clear the engine light.

ur next car - no mods to engine/related until after warranty!
contraband831CEN*CAL · Feb 1, 2009#6
😲 OUCH!

I know there are few mechanics on YW, try contacting YarisSedan, he may be able to help you out 🤷
TamagoOff Grid · Feb 1, 2009#7
i may have this part in my hand $80 shipped
Black YarisToledo, OH · Feb 1, 2009#8
either get Tamago's or I would salvage yard hunt
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#9
well it starts ok don't know if it will drive ok, if it does I'm going to go check what that check engine light means and look for a junkyard... I assume any 1NZ-FE will work out of a xA xB or other 1.5 yaris...
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#10
Originally Posted by Yawesh ↑

ur next car - no mods to engine/related until after warranty!
deal!
ShroomsterOrlando · Feb 1, 2009#11
looks like oil control valve assembly >>>>LINK<<<<


if that is the case.....I don't know if that is just the price for the screen on the end of that or what....I would hope it's for the whole piece...

if anything I'd print this diagram out and show whoever that location...
jonismynameadirondacks, ny · Feb 1, 2009#14
http://www.pressroom.com.au/pressroo...ts/echokit.htm

cut and pasted interesting bit below

Toyota Echo’s VVT-i is a computer controlled and oil-pressure activated push- push type system.

The engine ECU can command the system to advance or retard the inlet camshaft timing, thereby providing for faster response.

The hardware is a camshaft timing oil control valve mounted adjacent to the inlet camshaft gear wheel and a VVT-i controller mechanism built onto the inlet camshaft timing gear.

The camshaft timing oil control valve is a spool valve, controlled via a coil and plunger by the engine ECU.

It can signal "advance", "hold" or "retard". The VVT-i controller consists of a housing on the front of the timing wheel, driven from the timing chain, and a four-bladed vane coupled with the intake camshaft.

When the engine ECU requires a change in inlet timing, it signals the oil control valve to provide oil pressure to either the advance or retard side of the four vane chambers.

A locking pin in the controller locks the camshaft timing in the maximum retard position for engine start-up and immediately after start-up (until oil pressure is established) to prevent any knocking noise.
YarisSedanCalifornia - Bay Area · Feb 1, 2009#15
Looks like some sort of cam sensor. I would say its very important.
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#16
It is the camshaft timing oil control valve assembly. part# 11101J According to toyodiy.com it's $103.72 But I think I can get it from a local salvage yard for a lot cheaper... any ways now I know what it is and where I can get i... Thank you so much for your help, you have no idea how much I appreciate it!👍 🙇 🙌 🤘 👍 🙂
TamagoOff Grid · Feb 1, 2009#17
Originally Posted by CtrlAltDefeat ↑
It is the camshaft timing oil control valve assembly. part# 11101J According to toyodiy.com it's $103.72 But I think I can get it from a local salvage yard for a lot cheaper... any ways now I know what it is and where I can get i... Thank you so much for your help, you have no idea how much I appreciate it!👍 🙇 🙌 🤘 👍 🙂

not a bad price

i'll do it for $50 shipped.. save you the trouble of hunting at the salvage yard?
TamagoOff Grid · Feb 1, 2009#18
Yaweshlong island · Feb 1, 2009#19
Originally Posted by CtrlAltDefeat ↑
It is the camshaft timing oil control valve assembly. part# 11101J According to toyodiy.com it's $103.72 But I think I can get it from a local salvage yard for a lot cheaper... any ways now I know what it is and where I can get i... Thank you so much for your help, you have no idea how much I appreciate it!👍 🙇 🙌 🤘 👍 🙂
phew, luckily you didn't take it for a spin......a camshaft timing oil control valve........not too familar but if you actually drove it, the engine might not be in good shape.

anyway, best of luck and hopefully everything is ok. but honestly, if you are not too familar reinstalling this part, get professional help!
at3GGVA Beach · Feb 1, 2009#20
see? you get paper with his name on it too!
TamagoOff Grid · Feb 1, 2009#21
Originally Posted by at3GG ↑
see? you get paper with his name on it too!
common forum practice to prove it's my part, not a picture i found online
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#22
Originally Posted by Yawesh ↑
phew, luckily you didn't take it for a spin......a camshaft timing oil control valve........not too familar but if you actually drove it, the engine might not be in good shape.

anyway, best of luck and hopefully everything is ok. but honestly, if you are not too familar reinstalling this part, get professional help!
actually it's my DD and I had to drive it.. It doesn't seem to be doing too bad.. as far as installing it its about as simple as a spark plug...
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#23
well with the plastic stuck back together you cant tell it's broken... I think I might take it into the dealer and play dumb... "The check engine just came on and I brought it in under warranty..." maybe they'll think it just failed...🤷
AlexNet0Rockland, ME · Feb 1, 2009#24
if you want to ship it to me Ill apoxy the plastics back together and re-solder the wires back on for you if you still have them. shouldnt be more than a few bucks USPS
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#25
Originally Posted by AlexNet0 ↑
if you want to ship it to me Ill apoxy the plastics back together and re-solder the wires back on for you if you still have them. shouldnt be more than a few bucks USPS
I doubt it could be soldered together the wires are about as thick as a hair and mostly embedded in plastic... the crack in the plastic cracked through the wires... I think it might worth the gamble to take it in and play dumb...
AltitudeColorado · Feb 1, 2009#26
If I were you I'd pay the $50 to Tamago and be done with it. I don't think you'll be able to slide this one past the dealer.
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#27
Originally Posted by Tamago ↑
not a bad price

i'll do it for $50 shipped.. save you the trouble of hunting at the salvage yard?
I appreciate your offer, but I'm going to have to think about this first... I'll PM you when I decide... thanks! 🙂
CtrlAltDefeatThread starterIndianapolis IN · Feb 1, 2009#28
Originally Posted by Altitude ↑
If I were you I'd pay the $50 to Tamago and be done with it. I don't think you'll be able to slide this one past the dealer.
Yea I know... it's a tough decision... I wonder what the dealer would do if they found out...
AlexNet0Rockland, ME · Feb 1, 2009#29
I doubt it could be soldered together the wires are about as thick as a hair and mostly embedded in plastic... the crack in the plastic cracked through the wires... I think it might worth the gamble to take it in and play dumb...
I solder on surface mount motherboard capacitors and laptop AC jacks for work, as well as odd jobs all the time, Im pretty sure I could do it. Keep us posted regardless. If you end up buying tamago's then Ill send you a few bucks paypal if you will ship it to me anyway.
darkmoon87Vancouver, BC · Feb 1, 2009#30
Dont even take the chance of taking it down to the dealer for something you can pay Tamago $50 bux and replace. The risk is too high. If they found out that u were playing around with the engine and broke it, they might put a note down under your VIN and may void your drivetrain warrenty altogether. Or at least, you will have many disadvantages in the future when you bring the car to dealership regarding any drivetrain issue.
TamagoOff Grid · Feb 1, 2009#31
i can do next day air for another 10 bucks. you'll have the part on tuesday instead of thursday
contraband831CEN*CAL · Feb 1, 2009#32
^^^ I would take Tamago's deal, i would NOT deal with the dealer on this one.
TheRealEnthMiami, FL · Feb 2, 2009#33
50 is good
ShroomsterOrlando · Feb 2, 2009#34
Tamago is getting redemption points for this; help him and yourself DAMNIT!
AltitudeColorado · Feb 2, 2009#35
If you take it to the dealer they're going to know it didn't fail on its own. I'll bet the failure rate of that part is near nil, and it looks to me like some of the metal casing got bent when you accidentally wailed on it.

They'll be pissed and charge you not only for the part but for the diagnosis, labor and prolly some other fees. Not to mention they'll always treat you with suspicion in the future.

$60 next day air is a BARGAIN.
2006frontySan Bernardino · Feb 2, 2009#36
You really should just buy the part from Tamago, I think it'll save you a lot of hassle by avoiding the dealer .
eTiMaGoBangkok, Thailand · Feb 2, 2009#37
Hey... hey! I'm not selling that! 😁
vvtivalve.jpg
ZINGLebanon, Middle East. · Feb 2, 2009#38
^^ hahah
TamagoOff Grid · Feb 2, 2009#39
lol that's classic
RagnaCaTVillalba, Puerto Rico · Feb 2, 2009#40
Dropping off that $60 deal is going to cost him a ton at the DEALER....
CtrlAltDefeatThread starterIndianapolis IN · Feb 2, 2009#41
Originally Posted by eTiMaGo ↑
Hey... hey! I'm not selling that! 😁
hey Timago Tamago it's all the same thing! 🤣


Any ways, I went ahead and bought it from the stealer for $88 shipped (I told them my friend broke his on his '05 xB when replacing the belt 😁 )... I really appreciate all of your help, especially Tamago's offer and jonismyname for helping me find the part number... also for future reference the exact part number is 15330-21011 .(in case any one else ever needed it) If any of you need any help with any thing, let me know! I'm best with computers and I do a little programing/html on the side... If you in Indiana I could maybe help you with you cars (but obviously I'm an amateur 😳 ) So thanks a lot!
TamagoOff Grid · Feb 2, 2009#42
Originally Posted by CtrlAltDefeat ↑
hey Timago Tamago it's all the same thing! 🤣


Any ways, I went ahead and bought it from the stealer for $88 shipped (I told them my friend broke his on his '05 xB when replacing the belt 😁 )... I really appreciate all of your help, especially Tamago's offer and jonismyname for helping me find the part number... also for future reference the exact part number is 15330-21011 .(in case any one else ever needed it) If any of you need any help with any thing, let me know! I'm best with computers and I do a little programing/html on the side... If you in Indiana I could maybe help you with you cars (but obviously I'm an amateur 😳 ) So thanks a lot!
so you gave your business to a dealership instead of a fellow YW member 👎

i really could have used that cash right now lol
CtrlAltDefeatThread starterIndianapolis IN · Feb 2, 2009#43
Originally Posted by Tamago ↑
so you gave your business to a dealership instead of a fellow YW member 👎

i really could have used that cash right now lol
I'm sorry I didn't know 🤷 ... got any thing else you wanna sell? 😁
ddongbaphay · Feb 2, 2009#44
Its his decision. You shouldn't be giving him flack for a semi-nobody, to him, over a known dealer.
TamagoOff Grid · Feb 2, 2009#45
Originally Posted by ddongbap ↑
Its his decision. You shouldn't be giving him flack for a semi-nobody, to him, over a known dealer.
to him, yes, but to YW?

i've sold hundreds of dollars of stuff here
CtrlAltDefeatThread starterIndianapolis IN · Feb 3, 2009#46
Originally Posted by Tamago ↑
to him, yes, but to YW?

i've sold hundreds of dollars of stuff here
In my own defense, how would I know that? No offense, but I don't know you from Adam... I'm not saying any thing about you or your character, but I'm pretty new here and not quite comfortable yet with the people here... I can't say I made a good decision, but the way I saw it, this is my daily driver and only means of transport. I spent about $28 more for a brand new part, that I knew for a fact would work, in about the same amount of time. One might say modding your DD isn't a good idea, but the call of the mod was too strong. 🤤 I do feel bad I didn't buy it from you, but it was an important part of my car which I couldn't afford to risk... Now if you have any thing else to sell I would definitely think about it... I do appreciate all your help, and hope you're not really pissed off at me...
CtrlAltDefeatThread starterIndianapolis IN · Feb 5, 2009#47
welp, I got it, and got it installed tonight... was already lubed so it popped right in... The drama, however happened when I was putting the bolts back in. The POS ratchet didn't hold onto the socket and it freaking dropped into the engine! I'm starting to think I'm not cut out for this shit... First it fell behind the alternator, then I knocked it down into the hollow of one of the pulleys. I wasn't able to grab it so i knocked it hard trying to knock it onto the floor and it bounced 2 or 3 times and landed somewhere else in the engine! I was like WTF?? How many possible places could it have hit in the short distance between the pulley and the floor??? I couldn't start it for fear it would launch the socket from a pulley and break something so I had to freaking jack the thing up to look under it. I finally found it stuck between the oil pan and the body work... Jesus! Seriously I've never been this clumsy before... Virgin mechanic nervousness??

Any ways When I started it up the engine chugged for a moment but then seemed to straighten up... I turned it off and started it again without any more chugging ... The CEL stayed on but I assume I'll be able to get it cleared at Autozone... I think I'm done with the engine mods for a while... Hope my spring install goes better...
TamagoOff Grid · Feb 5, 2009#48
Originally Posted by CtrlAltDefeat ↑
I do appreciate all your help, and hope you're not really pissed off at me...
not at all buddy, not at all
bzinn 1University Place,WA · Feb 8, 2009#49
unhook the battery fro about 5 minutes and then hook it back up and start car,should clear the CEL
TamagoOff Grid · Feb 8, 2009#50
Originally Posted by bzinn 1 ↑
unhook the battery fro about 5 minutes and then hook it back up and start car,should clear the CEL
lol