Yarisworld Archive

WTB: Rear 10mm Hubspacers

33 posts · 12,457 views

tk-421Original postDagobah · Jan 30, 2009#1
I am interested in reasonably-priced 10mm hubspacers for my rear wheels. I've been searching all over the place and I can't find them anywhere.

Picture not included in this copy

Thanks! 🙌

Replies 32

cali yarisCanoga Park, CA · Jan 30, 2009#2
I think Tamago was producing these or trying to at some point - hit him up.
Malaya1221Torrance, Ca · Jan 30, 2009#3
got mine from tamaga😛...but i think he ran out of it...u might want to hit up scion forums and maybe ask around for evolved-concepts phone number...yaris and xd use the same spacers if i remember it correctly!
Black YarisToledo, OH · Jan 30, 2009#4
mike at alliance auto

ebay
RagnaCaTVillalba, Puerto Rico · Jan 31, 2009#5
Good luck on getting them i also got them from Tamago, I got 2 sets and they are great it looks really clean compared to spacers
tk-421Thread starterDagobah · Feb 4, 2009#6
I tried contacting Tamago, but he is not answering his PM's for some reason.
I tried going to the evolved concepts page, but it seems to be under construction.
I also found another site, but they don't have them in stock anymore.
Malaya1221Torrance, Ca · Feb 4, 2009#7
try contacting these guys and see if they make one for scion xa!

One Ton Garage
tk-421Thread starterDagobah · Feb 5, 2009#8
Originally Posted by Malaya1221 ↑
try contacting these guys and see if they make one for scion xa!

One Ton Garage
That's the site I found while googling about... They don't have any in stock at the moment 🙁
yarstarGeorgia · Feb 5, 2009#9
Bump to start watching this thread.


👍
RagnaCaTVillalba, Puerto Rico · Feb 5, 2009#10
Originally Posted by tk-421 ↑
That's the site I found while googling about... They don't have any in stock at the moment 🙁
I first checked there, the XA's are a no go for the Yaris but did hear that they made the one's Tamago sold 🤷 But try Emailing them
TamagoOff Grid · Feb 5, 2009#11
you HAVE to use yaris specific ones, or xD specific ones. xA/xB will not work
TamagoOff Grid · Feb 5, 2009#12
email: gmprecision@sbcglobal.net

the guy's name is Mark. he's the guy who made my first 10 sets (and then proceeded to try to sell them behind my back.. but screwed up his own part by putting 10mm holes in them instead of 12mm holes)

he may have some of those spacers kicking around for cheap
mikenacaratoBrentwood, TN · Feb 5, 2009#13
so we would have to bore the 10mm holes out to 12mm? thats not an issue at all but if thats the case he shouldnt charge full price for them for sure.
tk-421Thread starterDagobah · Feb 5, 2009#14
Originally Posted by Tamago ↑
email: gmprecision@sbcglobal.net

the guy's name is Mark. he's the guy who made my first 10 sets (and then proceeded to try to sell them behind my back.. but screwed up his own part by putting 10mm holes in them instead of 12mm holes)

he may have some of those spacers kicking around for cheap
Thanks! I'll see if he has a set available. 👍
TamagoOff Grid · Feb 6, 2009#15
Originally Posted by mikenacarato ↑
so we would have to bore the 10mm holes out to 12mm? thats not an issue at all but if thats the case he shouldnt charge full price for them for sure.
i agree, and serves him right for trying to deal behind my back lol


btw, get your metric grade12 SHCS bolts from www.mdmetric.com
yarstarGeorgia · Feb 6, 2009#16
Originally Posted by tk-421 ↑
Thanks! I'll see if he has a set available. 👍
+1
cali yarisCanoga Park, CA · Feb 6, 2009#17
H&R TRAK spacers are nice units, too. I had them on my xB (10mm).
I have those in stock, but think tk-421 is looking for inside hub spacers and less expensive. 🙂
mikenacaratoBrentwood, TN · Feb 6, 2009#18
Originally Posted by Tamago ↑
i agree, and serves him right for trying to deal behind my back lol


btw, get your metric grade12 SHCS bolts from www.mdmetric.com
maryland metrics is way to high for me. ive bought stuff there before and they pricegouge the crap out of you. i can get it locally though anyways. 🎉
tk-421Thread starterDagobah · Feb 6, 2009#20
Originally Posted by yarstar ↑
Are these what you are looking for? If they are and they'll fit, I'm gonna get a set too.

http://cgi.ebay.com/ebaymotors/Scion...Q5fAccessories
Hmmm.... Looks like those are pretty close (9.5mm)
But according to Tamago, xA/xB spacers will not work on the Yaris. Bummer... They do have a decent price... 🙁
TamagoOff Grid · Feb 6, 2009#21
Originally Posted by tk-421 ↑
Hmmm.... Looks like those are pretty close (9.5mm)
But according to Tamago, xA/xB spacers will not work on the Yaris. Bummer... They do have a decent price... 🙁

they will not work. i've personally verified with my own two hands.
TamagoOff Grid · Feb 6, 2009#22
Originally Posted by mikenacarato ↑
maryland metrics is way to high for me. ive bought stuff there before and they pricegouge the crap out of you. i can get it locally though anyways. 🎉
good luck finding the right 12MM bolt with correct thread pitch.. the bolt kits that went out with the spacers i sold last year came from mdmetric. cheapest prices i could find on THAT specific bolt
1NZYaris1New Zealand · Feb 7, 2009#23
What size are they M12x1.25 , M12x1.5 or M12x1.75
and what length
TamagoOff Grid · Feb 7, 2009#24
M12X1.25 IIRC and i purchased 50mm
yarstarGeorgia · Feb 7, 2009#25
Originally Posted by Tamago ↑
they will not work. i've personally verified with my own two hands.
Damn. And these were so cheap too.

The seller also tells me these won't fit a Yaris. I've ask him another question where they might be obtained.

Guys name is Mike. Looks like the same guy BlackYaris mentions in post #4.
RagnaCaTVillalba, Puerto Rico · Feb 7, 2009#26
Originally Posted by Tamago ↑
they will not work. i've personally verified with my own two hands.
+1
1NZYaris1New Zealand · Feb 7, 2009#27
Tamago or anyone , do you have a scale drawing of these hub plates , please.
TamagoOff Grid · Mar 3, 2009#29
that's not a hub spacer
tk-421Thread starterDagobah · Mar 3, 2009#30
Originally Posted by Tamago ↑
that's not a hub spacer
Yeah that's what I suspected...
This is what I'm looking for (or very close to it):

Picture not included in this copy
YarisSedanCalifornia - Bay Area · Mar 3, 2009#31
What about the spacer that goes in between the wheel and the hub. I think 10mm you may not even need to extend the studs.
TamagoOff Grid · Mar 4, 2009#32
Originally Posted by tk-421 ↑
Yeah that's what I suspected...
This is what I'm looking for (or very close to it):

Picture not included in this copy
well if you can find a machinist who's reasonable, i'll send him the drawings to make more.. in retrospect i should have had the machinist make 100 sets for me instead of only 10
TamagoOff Grid · Mar 4, 2009#33
Originally Posted by YarisSedan ↑
What about the spacer that goes in between the wheel and the hub. I think 10mm you may not even need to extend the studs.
10mm you WILL have to extend the hubs


but then this begs the question

why don't you just buy the correct offset wheel to begin with?