Yarisworld Archive

Need some help...

36 posts · 34,315 views

cm07yarisOriginal postAppleton, WI · Jan 29, 2009#1
Disconnected the negative battery terminal and removed the alternator to install the NST alt pulley. When I got everything back in order and started up my car, the following don't work: power steering, power windows, power locks, radio, heater and controls, and the airbag light is lit on the dash. Any suggestions? Thanks!

Replies 35

1NZYaris1New Zealand · Jan 29, 2009#2
check the main fuse box under bonnet next to the battery.
cm07yarisThread starterAppleton, WI · Jan 29, 2009#3
Any fuse in particular?
1NZYaris1New Zealand · Jan 29, 2009#4
All the main fuses in the box, they are the square ones with a clear veiwing
window , sounds like you have blown them all.
1NZYaris1New Zealand · Jan 29, 2009#5
i would also check your alternator connections and make sure they are not touching anything.
cm07yarisThread starterAppleton, WI · Jan 29, 2009#6
Thanks, I'll check it out tonight after class and report back. Can you find that type of fuse locally?
Black YarisToledo, OH · Jan 29, 2009#7
more likely you forgot to hook something back up.... check all your connections and look for a loose ground
cm07yarisThread starterAppleton, WI · Jan 29, 2009#8
Originally Posted by Black Yaris ↑
more likely you forgot to hook something back up.... check all your connections and look for a loose ground
It's only a negative battery terminal, 2 plugs on the alt., and a ground on the alt. Pretty sure they are all connected...I'll double check. I don't know why ALL of those fuses would blow.
Black YarisToledo, OH · Jan 29, 2009#9
more likely did not reconnect something, than all those fuses blowing at the same time
cm07yarisThread starterAppleton, WI · Jan 29, 2009#10
Fuses seem to be straight. I unplugged the 2 plugs and ground, then reconnected. Still nothing...anyone else?
tk-421Dagobah · Jan 29, 2009#11
This exact thing happened to me after the pulley install. There's a harness in that area that I broke and needed to replace.
cm07yarisThread starterAppleton, WI · Jan 29, 2009#12
Originally Posted by tk-421 ↑
This exact thing happened to me after the pulley install. There's a harness in that area that I broke and needed to replace.
What is considered broken? The plastic casing is not cracked or anything. The plug on top or on bottom, or the entire harness?! Thanks TK!
tk-421Dagobah · Jan 30, 2009#13
well in my case it was the female end of the plug... they used some epoxy to hold it together... It worked for a while, but it broke eventually.
ShroomsterOrlando · Jan 30, 2009#14
....remove the negative and then the positive look at the big glob of crap on the positive battery wire.....make sure both the fuses are ok....the one is the alternator fuse won't let the car turn over the other is the starter fuse IIRC.... both are like 50A or something....
cm07yarisThread starterAppleton, WI · Jan 30, 2009#15
Originally Posted by Shroomster ↑
....remove the negative and then the positive look at the big glob of crap on the positive battery wire.....make sure both the fuses are ok....the one is the alternator fuse won't let the car turn over the other is the starter fuse IIRC.... both are like 50A or something....
The car turns over, starts, and runs perfectly fine. I just have no power to any accessories.
ShroomsterOrlando · Jan 30, 2009#16
well, it sounds like a grounding issue like Black said.....
1NZYaris1New Zealand · Jan 30, 2009#17
Originally Posted by Shroomster ↑
well, it sounds like a grounding issue like Black said.....
+1 on that or it is the main power wire to the under bonnet fuse box,
double check your earth contacts in engine bay , and check + as well
see picture off fuses , and don't worry about the wires circled in yellow.
they are the fog light wires.
yaris wiring 002.JPG
1NZYaris1New Zealand · Jan 30, 2009#18
you might also look at the fuses in the car under main main junction
check photo it is under that .
yaris wiring 003_edited.JPG
cm07yarisThread starterAppleton, WI · Jan 30, 2009#19
Thanks guys, I'll take another look.
cm07yarisThread starterAppleton, WI · Jan 30, 2009#20
I believe I found my problem. The 120 Alt. fuse within the fuselink on the positive battery terminal was fried...we'll find out on Tuesday when the replacement arrives. Thanks again for all the replies!
ShroomsterOrlando · Jan 30, 2009#21
***COUGH***
Originally Posted by SHROOMSTER
....remove the negative and then the positive look at the big glob of crap on the positive battery wire.....make sure both the fuses are ok....the one is the alternator fuse won't let the car turn over the other is the starter fuse IIRC.... both are like 50A or something....
*COUGH*
1NZYaris1New Zealand · Jan 30, 2009#22
Originally Posted by Shroomster ↑
***COUGH*** *COUGH*
Are you chokeing on something Shroo, do you need help tooooo 😆
well done 🙌
ShroomsterOrlando · Jan 30, 2009#23
lol nah...I should've written the entire thing out...the alt fuse because its so big will sometimes melt itself to a point where it will still arc power.... but the pcm senses a drop and cuts all outlying power accessories....
cm07yarisThread starterAppleton, WI · Jan 31, 2009#24
Hehe, I guess "big glob of crap" doesn't mean much to me! Not quite the type of fuse I was expecting to see... I believe its some sort of fuselink.
CtrlAltDefeatIndianapolis IN · Jan 31, 2009#25
I'm about to install the underdrive pulley... any thing I should do to prevent this?
1NZYaris1New Zealand · Jan 31, 2009#26
be careful not to short out battery.
but you should have no worries unless you are doing all 3 pullies.👍
m911gtChicago · Jan 31, 2009#27
Damn Casey, I just found this thread. I'm glad you located the source of the problem!
cm07yarisThread starterAppleton, WI · Jan 31, 2009#28
Originally Posted by m911gt ↑
Damn Casey, I just found this thread. I'm glad you located the source of the problem!
Thanks man, I'll find out for sure if this is the problem on Tuesday. I'm 99% sure it is...
cm07yarisThread starterAppleton, WI · Feb 5, 2009#29
Up and running again, only $12.95 later!
ShroomsterOrlando · Feb 5, 2009#30
Originally Posted by cm07yaris ↑
Up and running again, only $12.95 later!
12.95 for the fuse?
cm07yarisThread starterAppleton, WI · Feb 5, 2009#31
Originally Posted by Shroomster ↑
12.95 for the fuse?
It's a fuseable link...have a look sometime. Take off the red plastic cover on the positive battery terminal.
m911gtChicago · Feb 5, 2009#32
Whew! Glad to hear it was a cheap fix!
ShroomsterOrlando · Feb 5, 2009#33
Originally Posted by cm07yaris ↑
It's a fuseable link...have a look sometime. Take off the red plastic cover on the positive battery terminal.
lol...I'm the one that told you to look there...anyways glad to hear you're back up and running again!👍
xxcanuckxxBond Head Ontario Canada · Jan 15, 2019#34
Its 2019, is anyone still on this forum? Anyone following this thread?
If I understand correctly, I am looking for something under the big plastic protector on the positive wire that runs to the battery? This seems to be the same problems I have been having...
2007 3dr RS 5spd, 380,000km...
WeeYariGeorgetown, Ontario, Canada · Jan 15, 2019#35
The glass rectangle you see here is the fusible link.

Sent from my EML-L09 using Tapatalk
xxcanuckxxBond Head Ontario Canada · Jan 16, 2019#36
Originally Posted by WeeYari ↑
The glass rectangle you see here is the fusible link.
Thank you WeeYari! Much appreciated!
👍