Yarisworld Archive

New Project AE86...!

28 posts · 11,303 views

CASTREXOriginal postCosta Rica · Jan 27, 2009#1
Hey Guys,


Just picked it yesterday. It was from a friend who wasn't had to let it good. I've wanted one of these for years. Ever since I first saw Takumi driving down Mt. Akina (Who hasn't???)

What you see on the pictures is a 1986 SR5 coupe half way to become a GT-S.
The chassis is on excellent condition, and it has a recently swapped bluetop 4A-GE with the T-50 tranny.

The engine was refreshed and tested before going in.

The car came with new Konig wheels, a Momo steering wheel and some bucket seats from an early gen Impreza GT.

I will be working the new project with my younger Bro.

The car will be going the turbo route.... As part of the deal I picked a super rare Trust (Greddy) turbo manifold and the car already has a high capacity fuel pump installed.

The project will likely go slow as the founds are tight... but I will be posting the progress.

The goal. 250rwhp

So what you think?

7 attachments not included in this copy

Replies 27

tk-421Dagobah · Jan 27, 2009#2
Schweet! I bet Mike@NST might be able to throw some pointers your way.
Keep us updated!
CASTREXThread starterCosta Rica · Jan 27, 2009#3
Pics uploaded.

I know I will be picking a few NST goodies on the up coming months!!😁


Looks like the Yaris modifications rate will take hit this year...

No problem tough as it stays on the Toyota Family 😁
Thej3sta2Orlando, FL · Jan 27, 2009#4
Id say drop the blue top in the yaris.

Then save up for a 2jz and drop that in the corolla.
Russelt3hPirateEpcot · Jan 27, 2009#5
going with the levin front end?
NonStopTuningUSA · Jan 27, 2009#6
Looks like a clean 86! Keep up the good work and be sure to add some NST goodies, we offer A LOT of items for the 86 and the 4AG.

And the best tip I can give you... Join www.86garage.com
The majority of the NST crew owns 86s and posts there!

Welcome to the 86 family, and good luck with all your projects!

👍👍
gomez1184Costa Rica · Jan 27, 2009#7
👍
cant wait to see whats coming first!!
(cant wait to get a ride when its done jeje)
CASTREXThread starterCosta Rica · Jan 27, 2009#8
Originally Posted by Russelt3hPirate ↑
going with the levin front end?
Don't think so... I like the levin front BUT lots of things to be done first to add the front end makeover to the list.


Originally Posted by NonStopTuning ↑
Looks like a clean 86! Keep up the good work and be sure to add some NST goodies, we offer A LOT of items for the 86 and the 4AG.

And the best tip I can give you... Join www.86garage.com
The majority of the NST crew owns 86s and posts there!

Welcome to the 86 family, and good luck with all your projects!

👍👍
Thanks for the tip!!

You bet I'll be picking some NST stuff...! I already have my eye on your cam gears, the clear cover and the pulleys offcourse.
johnnypaseoSocal SF valley · Jan 27, 2009#9
nice project!! i was really considering an ae86 project but opted for something older lol!! looking forward to the next update
BLAZINBLUEVITZNEW YORK · Jan 27, 2009#10
car is nice and CLEAN......
ClodeItaly · Jan 27, 2009#11
my GOD!!👏🤤
SilverBackEl Monte, Ca · Jan 27, 2009#12
Very nice. Looking forward to seeing you drift it when your done modding👍

Just make sure the Y doesn't feel left out😆
jinxorSydney, Australia · Jan 27, 2009#13
Was the 86 always popular?

Sorry by noobness, but I only came to know about 86's from Initial D....
SilverBackEl Monte, Ca · Jan 27, 2009#14
Originally Posted by jinxor ↑
Was the 86 always popular?

Sorry by noobness, but I only came to know about 86's from Initial D....
It's one of the more popular cars since the earlier days of drifting. Under-powered by today's standards, but still popular
CASTREXThread starterCosta Rica · Jan 28, 2009#15
^^^

But it was not always popular... at least not on this side of the earth.

In Japan is another story but in America it was only known after Initial D.


But think about it... there are good reasons for it's popularity...

Cheap
Rear wheeldrive
Under 2200lbs with full body
Almost 50 / 50 weight distribution
Tons of aftermaket support
Lots of engine swap options well documented

This car is the ultimate beater... Is 23 years old and the chasis is still really tight. Everything works ok.

Is a great car to learn some driving skills...


Back in the day... this car was way ahead of his time!
Kaotic LazagnaCentral Valley, CA · Jan 28, 2009#16
I've always wanted a Hachi.
solarVitzSan Diego · Jan 29, 2009#17
welcome to the club. i love my AE86's. i got two. a levin coupe and trueno hatch.
CASTREXThread starterCosta Rica · Jan 29, 2009#18
👍👍
blacksandiegovitzJust chillin' out brah ! · Jan 29, 2009#19
Originally Posted by CASTREX ↑
The car will be going the turbo route.... As part of the deal I picked a super rare Trust (Greddy) turbo manifold and the car already has a high capacity fuel pump installed.

The project will likely go slow as the founds are tight... but I will be posting the progress.

The goal. 250rwhp
So what you think?
Very , very good starting point you got there . What I would do to the car is all suspension first . There is such an amazing aftermarket for the ae86 suspension wise. I've seen any and every suspension part to make this car into an killer track car . Now on to your 250 rwhp , not to burst your bubble but its gonna be very expensive to do with that motor . Honestly you need to gank the motor , rebuild it using all upgraded parts to handle boost , turbo , piping , intake , fmic , oil supply/drain for the turbo , exhaust downpipe fabbing , waste gate/ dump (depends of if using internal or exteral Wg?) upgraded injectors , bov , and some kind of fuel controller(minimum apexi afc2) are needed for this project as well as a few random gaskets for the turbo mani to head /turbo to mani, oil gaskets, turbo elbow gaskets , dp gaskets . All these parts add up real quick just what I listed above is at least 5k+ then with more power you'll need to upgrade your clutch/flywheel . Imo , madd suspension modds , don't be scared to buy quality used suspenion parts for the car , and just run the engine in the car As-is with just a underdrive pulley and upgraded intake till it kicks the can , then upgrade .
CASTREXThread starterCosta Rica · Jan 30, 2009#20
I'm probably shooting a little high with the 250 hp goal... but we will see..

I'm well aware of all the implications of going the turbo route... but I'm sure I call pull it for much less than the $5K you mentioned...

For suspension I'm looking into Megan coilovers for around $800

4 links and a couple other bars and good to go...

I will probably go by stages... with a first stage on the stock engine with low boost 6-7psi around 150whp

And going for a 4agze (supercharged)block or at least the pistons and rods for 15-18 psi

The greedy manifold I got comes flanged for a TD05 turbine... so I guess I could use a subaru turbo which can be found fairly cheap...

Supra OE Injectors, ebay universal FMIC and DIY piping kit..

Downpipe and exhaust I'll get them done locally.. not that expensive.

Spec stage 3 clutch with oe flywheel...

And for management I've been looking into the Megasquirt DIY

I guess the good part of working on an old car like this one is the great availability of parts and the possibility of exchange them.

Is definitely a lot of work to be done... but if done patiently it can be pulled on a budget and still with quality parts...
NonStopTuningUSA · Jan 30, 2009#21
Sounds like you've been doing some homework there! Some reading on 86garage perhaps? 😉
ka0sxCA east bay · Jan 30, 2009#22
pssst. its very easy to put a 1jz in as long as you know how to weld a bit.
1jz = 2.5l 280hp with aftermarket dp you will be at 300-310hp so about 250rwhp
CASTREXThread starterCosta Rica · Jan 30, 2009#23
Originally Posted by ka0sx ↑
pssst. its very easy to put a 1jz in as long as you know how to weld a bit.
1jz = 2.5l 280hp with aftermarket dp you will be at 300-310hp so about 250rwhp
True that!!! But you will completely loose the balance of the car..

Like putting a LS1 on a Miata... 😳

Plus the car doesn't have enough room for the tires that will be required to lunch that beast.

It will be cool tough to see peoples face.... 😲
ArkhangelPuerto Rico · Jan 30, 2009#24
Awesome Man Keep us posted, ive been interested in the Trueno Hatch also
Seen a couple down here in Puerto Rico, Saw one going for $500 but had no cash damn lol
CASTREXThread starterCosta Rica · Jan 30, 2009#25
Originally Posted by Arkhangel ↑
Awesome Man Keep us posted, ive been interested in the Trueno Hatch also
Seen a couple down here in Puerto Rico, Saw one going for $500 but had no cash damn lol
It's so hard to find a clean AE86...!

Look at me... I was looking for a GTS Hatch originally and end up with a SR5 Coupe. 🤣

It's so freaking funny to drive this little car... I barely fit inside but I can't get enough of it...

I was doing some donuts and e-brake maneuvers in front of my house tonight... I bet the neighbors are quite happy wit my new toy...🤣
ZefoxeNY · Jan 31, 2009#26
I miss our Hatchback :(
TOUGEghostKauai · Jan 31, 2009#27
Nice car. It's really hard to find a nice non-rusty car like that over here. A bunch of my friends all have hachis. Even got a few 4AGZE's. One of the 4AC cars got a SR20 swap after about 3 blown motors, lol.
jeremyshayLouisville, Ky · Feb 1, 2009#28
i hate you soo much right now!
awesome find!