Hey guys this is my first post... i had a pair of eyelids for my sedan n installed it with some 3m permanent double sided tape n the lids never seemed like they were on the headlight good, the sides were always getting loose n i was always pushing it down on the headlight n i always felt worried about them fallin off until one day i took my car to a car wash n on the way back home both of the eyelids flew off my headlights i was really pissed but eh wat can i do... im plannin on re ordering them but this time i wanna place them on correctly wat kind of tape should i use so it can be on nice n tight n not have to ever worry? i appreciate all replies thanks guys....🆘
Help from eyelid owners please...
7 posts · 3,822 views
Replies 6
Red 3m brand, out-door double sided tape . I mounted my stock wing with this same tape and nothing else and it didn't fall off the car going 110 so probaly the best for installing eyelids imo.
i got my eyelids for my sedan as well and I used the Scotch® Exterior Mounting Tape 4011
http://products3.3m.com/catalog/us/e...er/output_html
I had them on for about 6 months now and I've been through the car wash many times and i've been through rain and snow and they're still on.
http://products3.3m.com/catalog/us/e...er/output_html
I had them on for about 6 months now and I've been through the car wash many times and i've been through rain and snow and they're still on.
3m body molding tape that can be found at any automotive store..... trick is in the prep.... make sure both surfaces are very clean, I usually wipe the surface with windex or rubbing alcohol before attaching.... it also needs to be somewhat warm, but I do not think you have that problem in Florida
+1 the red 3m tape is the same stuff manufacturers/bodyshops use to attach badges.Originally Posted by blacksandiegovitz ↑Red 3m brand, out-door double sided tape . I mounted my stock wing with this same tape and nothing else and it didn't fall off the car going 110 so probaly the best for installing eyelids imo.
+2Originally Posted by Black Yaris ↑3m body molding tape that can be found at any automotive store..... trick is in the prep.... make sure both surfaces are very clean, I usually wipe the surface with windex or rubbing alcohol before attaching.... it also needs to be somewhat warm, but I do not think you have that problem in Florida
The surface must be very clean before attempting an install. Also be sure to wait for the area to dry out completely.
Thanks alot on the info im going to reorder the lids from garm n get the 3m body molding tape at the local automotive store.... N also another question for sedan owner i dont think lb owners have this problem when u install the lid dont u hate the gap of lighting between the hood and the lid when headlights are on... how did some of u fix this problem or did some of you not worry about it...? in my previous install i used black electrical tape to cover the lighting in the gap im wonderin wat some of u guys did?? 😕