Power Enterprise EvanOriginal postIrvine, CA · Jan 20, 2009#1Which one do you prefer?
How much is a reasonable price to pay?
Replies 212
at3GGVA Beach · Jan 20, 2009#2well as of right now the only "plug and play", or "bolt on" option we have is a SC by Blitz. It has gotten good reviews aside from some PITA situations with installing it. If you want a turbo your gonna have to peice one together or take your chances with some iffy kits. Caliyaris has one SC left i believe @$3400. Seeing as its the only Blitz SC you can buy without a royal PITA, I'd say its worth it if youve got it
LtNoogieWest Hills, CA · Jan 20, 2009#3Do you want to be boosted now? Or practically never? You can install a supercharger now for about $3500. You can talk and wish alot and a long time for a turbocharger kit. Just read all the turbocharger threads that have died off.
If someone had a turbocharger kit working today, I'd go turbo due to the higher hp gains. It just depends upon how long are you willing to wait for the thrill of the surge.
CASTREXCosta Rica · Jan 20, 2009#4 Originally Posted by
Power Enterprise Evan ↑ Which one do you prefer?
How much is a reasonable price to pay?
The eternal question.
No right answer for it.
So far there is one SC option available and Zero Turbo options available.
How do you compare that? ; )
LtNoogieWest Hills, CA · Jan 20, 2009#5 Originally Posted by
CASTREX ↑ The eternal question.
So far there is one SC option available and Zero Turbo options available.
How do you compare that? ; )
You stated my thoughts much more succinctly!👍
PETERPOOPOahu · Jan 20, 2009#6turbo, plug and play. 180whp please. 2500$
Power Enterprise EvanThread starterIrvine, CA · Jan 20, 2009#7$3770 SHIPPED TO 48 STATES for 142 WHP?
anything outside that pays the difference
worth it to you?
CASTREXCosta Rica · Jan 20, 2009#8I just got a little chat with Evan.
This will be interesting.
Subscribed.
GideonSunnyvale, CA · Jan 20, 2009#9Is this the ROTREX super charger kit, as seen on the Power Enterprises website?
Picture not included in this copy
At this point, I am very interested. Very VERY interested if you throw in an intercooler for future increases of boost. :D
Power Enterprise EvanThread starterIrvine, CA · Jan 20, 2009#10Yes, Gideon it is one in the same
I was speaking to Gastrex, evidently there are more than one engine version for the yaris available...
this one is good for the Toyota (Scion) NCP91(2WD)
250,000RPM
Centrifugal type, much more quieter and efficient, nearly the same power band as a turbo!!!
Up to 98% Efficiency
Traction Drive - NO gears, much less heat than blower type or roots type.
YES, THE PIGGY BACK IS REPROGRAMMABLE!!
YES, THERE ARE OPTIONS TO INCREASE BOOST!!
YES, IT WILL BOLT RIGHT UP, IN ABOUT 4 HOURS!!! (assuming you know what your doing😛)
YES, IT WILL WORK WITH A STOCK SETUP!! we setup our kits for "safety" there is much more room for Power!!😈
MADE IN JAPAN AND DENMARK!!! NOT SOME CHINA KNOCK OFFS!!
Gastrex also noted that two other people here have tried or bought the system from Japan...
We Power Enterprise USA were NOT allow to sell, support or give any other advice/comments to the US market, as of TODAY 1/20/09 have received the OK from Rotrex to sell to the US market.
PE USA will support any kits purchased directly from us or our authorized dealers.
http://powerenterpriseusa.net/Powern...trex-news.html Price will be $3770 SHIPPED to any upper 48 states any where else has to pay the difference.
Picture not included in this copy Picture not included in this copy The picture shows Toyota VITZ (Yaris) with Rotrex C15-60 charger.
A piggyback fuel controller (pre-programed & Reprogramable) included.
Boost pressure of 0.4kg/cm2 , no inter cooler,
generates 142 whp.
Picture not included in this copy Toyota VITZ kit consists of:
(all the parts shown on the photo left)
1. Pre-Programed & Programable Fuel controller
2. C15-60 super charger with oil cooler kit
3. Brackets, fasteners, pulley, belt, belt tensioner, tubing & hoses
$4350
Picture not included in this copy Toyota VITZ w/C15-60, 1st test without inter cooler produced 142WHP at 0.4kg/cm2 and produced 150WHP with inter cooler addition.
Remarks
■The kit is designed specifically for Toyota (Scion) NCP91(2WD)
■The fuel controller preprogramed with use of Power's Air Impulse
■91 or higher octane gas must be used.
■Spark plugs need to be changed to #7 heat range
■Recommended Engine oil: 40w or 50w
MODS: I will be signing up once I get the ok from my boss.... if you want me to remove this let me know, i will - Evan
ChinoCharlesOH · Jan 20, 2009#11The thread is fine, and good to see that we finally have a Rotrex unit on the market!
PETERPOOPOahu · Jan 20, 2009#12Throw in the intercooler for that price and shipping to hawaii included for that price also and i would be sold.
Power Enterprise EvanThread starterIrvine, CA · Jan 20, 2009#13 Originally Posted by
PETERPOOP ↑ Throw in the intercooler for that price and shipping to hawaii included for that price also and i would be sold.
Sorry the best I can offer is the shipping included to Hawaii....including an intercooler is out of the question...sorry
*Note since I am offering the shipping to Hawaii I will extend it to Alaska and any other US territory. This will be good until Feb 14th
you can use an OEM subaru intercooler or something similar.
Kits may also be picked up from our Irvine, CA office. Must be paid in cash if picked up.
PETERPOOPOahu · Jan 20, 2009#14Oh fart, it's my move now..
So guys, is this kit worth it? Where's the pros at. Pick this thing apart! I'm waiting.
LtNoogieWest Hills, CA · Jan 20, 2009#15PETERPOOP, what? You don't even ask for a video of the thing running? You're getting soft, man.😛
Power Enterprise EvanThread starterIrvine, CA · Jan 20, 2009#16 Originally Posted by
PETERPOOP ↑ Oh fart, it's my move now..
So guys, is this kit worth it? Where's the pros at. Pick this thing apart! I'm waiting.
😆
HAHAHA yes your move 🍻
PETERPOOPOahu · Jan 20, 2009#17 Originally Posted by
LtNoogie ↑ PETERPOOP, what? You don't even ask for a video of the thing running? You're getting soft, man.😛
Good point. What was I thinking!
Yah give me a video of a vitz or yaris running this kit atleast! Jeez. Some 0-60 times? 1/4 mile times with this thing? Where's the videos!?!?!?!? 😉
mikenacaratoBrentwood, TN · Jan 20, 2009#18gimme a few months to a year to save and im in. haha but seriously, so for this looks liek the route i wanna go, but coughing up 4gs? payment plans available? can i sign up for the power enterprises credit card? haha
thebarberGrand Rapids, MI · Jan 20, 2009#19so do you have a better dyno graph? dyno SAE #'s?
have a dyno showing the tq curve?
dyno'd with any exhaust mods?
use camcon for the ecu tuning?
need a mule car for north american testing? send me a kit and ill have it up an running w/ a dyno in no time...
GideonSunnyvale, CA · Jan 20, 2009#20Now that I remember, both ddongbap and saplaymate have/had this kit.
Both were met with difficulties, although I can't remember what they were.
mikenacaratoBrentwood, TN · Jan 20, 2009#21did they have the yaris specific kit or did they modify the xb kit?
saplaymateSATX · Jan 20, 2009#22Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!
GideonSunnyvale, CA · Jan 20, 2009#23 Originally Posted by
saplaymate ↑ Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!
What went bad with your kit?
PETERPOOPOahu · Jan 20, 2009#24i still want videos. what kinda boost does this put down? what were the specs of the car on that dyno? exhaust? pulleys? intake? would this work with richard's manifold? would a bigger Throttle Body or richard's manifold make this kit throw cells? i guess it'd need to be retuned with a different manifold and throttle body, correct? since it's based only on the stock manifold and throttle body
GideonSunnyvale, CA · Jan 20, 2009#25 Originally Posted by
PETERPOOP ↑ i still want videos. what kinda boost does this put down? what were the specs of the car on that dyno? exhaust? pulleys? intake? would this work with richard's manifold? would a bigger Throttle Body or richard's manifold make this kit throw cells? i guess it'd need to be retuned with a different manifold and throttle body, correct? since it's based only on the stock manifold and throttle body
Boost pressure is mentioned on the previous page with the additional information about the kit.
The piggyback is reprogrammable, so if you ended up with a new intake manifold and TB you would need to have the it retuned for that.
staypuftchicago · Jan 20, 2009#26wow i originally wanted this kit long time ago, i guess its too late now
ddongbaphay · Jan 21, 2009#27Lol. Now its offical?
cm07yarisAppleton, WI · Jan 21, 2009#28Group buy?
TheRealEnthMiami, FL · Jan 21, 2009#29gb
Nexus1155Dorchester · Jan 21, 2009#30But seriosuly is there a financing option I know some companies offer it now?, dumping 4k all at once isn't as ideal as it seems, I wouldn't mind $500 a month. Or would id be better to grab a credit card?
Thej3sta2Orlando, FL · Jan 21, 2009#31chirp chirp
PETERPOOPOahu · Jan 21, 2009#32They should throw in that intercooler. Bogus.
CASTREXCosta Rica · Jan 21, 2009#33You can pick a small IC for like $50
Piping looks simple enough for a DIY
If the kit perfoms as advertize and all the bugs have been cured... then this is a really good option for some one looking for trouble free boost.
PETERPOOPOahu · Jan 21, 2009#3450$? show me where. Don't forget my lovely shipping rate to hawaii. DIY piping? Wouldn't mandrel bending be needed for the piping?
CASTREXCosta Rica · Jan 21, 2009#35 Originally Posted by
PETERPOOP ↑ 50$? show me where. Don't forget my lovely shipping rate to hawaii. DIY piping? Wouldn't mandrel bending be needed for the piping?
hehe missed the hawaii part....
But still not bad. See this one $47 + $78(shipping to HI)😲 = $125
http://cgi.ebay.com/ebaymotors/CXRac...Q5fAccessories You can also go to a local wrecked yard and look for a eclipse, audi, volvo, subaru OEM intercooler.
For this set up and for the amount of boost it will run... even the smallest of the OEM intercooler will do just fine! You can always upgrade it later on with a more shiny unit..
About the piping you just need to figure how many extra bends would you need and pick them on line or on a local store along with a couple of silicone couplings...
PETERPOOPOahu · Jan 21, 2009#36ah i see. thanks for the info. however, the junkyards here in hawaii are not like the ones in the mainland. i don't even know where one is!
taKutoToronto · Jan 21, 2009#37will this kit fit the canadian echo's?
at3GGVA Beach · Jan 21, 2009#38god i wish i had more money
CASTREXCosta Rica · Jan 21, 2009#39 Originally Posted by
taKuto ↑ will this kit fit the canadian echo's?
Nop
is for the NCP91 Yaris as stated by the OP
at3GGVA Beach · Jan 21, 2009#40or a car nut wife...
lilredrocketDFW, Texas · Jan 21, 2009#41Is the NCP91 just like the 1NZ-FE?
mikenacaratoBrentwood, TN · Jan 21, 2009#42ncp91 is body style, 1nzfe is engine code.
that kit is for the ncp91 yaris with 1nzfe engine
lilredrocketDFW, Texas · Jan 21, 2009#43Oh ok now I understand. Thank you for the fast reply. So in the end which s/c kit would be better? Cause the blitz you have a control knob to adjust it and this one looks like it could be used with richards intake manifold. I think the tb position is the same as stock and if not how much could the extra piping cost? Maybe thinking about buying a s/c with my tax return
cali yarisCanoga Park, CA · Jan 21, 2009#44No one wants more boosted options made available more than I do.
However, I'm going to point out that Power Enterprise is not yet a supporting vendor, and therefore not entitled to post blatant sales threads.
As soon as they are, I will cheer them on as much as anyone!
PETERPOOPOahu · Jan 21, 2009#45I don't like how this guy posted this initial thread and hasn't even come back since. Hit and run spam!
Power Enterprise EvanThread starterIrvine, CA · Jan 22, 2009#46 Originally Posted by
saplaymate ↑ Does this mean you are going to Warranty my Rotrex unit as well! Since I bought it from you!
We do not warranty any products unless they are purchased directly from PE USA or one of our direct dealers. at the time you circumvented the restriction that was in place by rotrex, buying it from japan voids any warranty or support from PE USA
we will offer support to any products purchased from us👍
Power Enterprise EvanThread starterIrvine, CA · Jan 22, 2009#47 Originally Posted by
CASTREX ↑ You can pick a small IC for like $50
Piping looks simple enough for a DIY
If the kit perfoms as advertize and all the bugs have been cured... then this is a really good option for some one looking for trouble free boost.
yes, the piping is very easy to manipulate, if you guys really dont want to spend the extra bending pipe, you can just get pipe, sand and a torch..
fill the pipe with sand, heat it up, bend it, cool it off and paint it black...
the sand helps keep the pipe from kinking when you bend it
👍
Power Enterprise EvanThread starterIrvine, CA · Jan 22, 2009#48 Originally Posted by
taKuto ↑ will this kit fit the canadian echo's?
yes as long as you have the same engine...
Power Enterprise EvanThread starterIrvine, CA · Jan 22, 2009#49as far as group buys... this is already discounted from the MSRP of $4190....
BUT... bring me 5 buyers with cash in hand...and i'll give you a better price....
Power Enterprise EvanThread starterIrvine, CA · Jan 22, 2009#50oh an yes we are now OFFICIAL vendors...