Yarisworld Archive

who removed their VVTI engine cover?

9 posts · 6,498 views

YaweshOriginal postlong island · Jan 14, 2009#1
was thinking if it would ok to remove it and drive without it

i was thinking it could be cooler for the engine

Replies 8

m911gtChicago · Jan 14, 2009#2
yeah, won't hurt anything
DFAPanama City, Panama · Jan 14, 2009#3
Won't hurt at all. Can't think it will do a whole lot of good either but what the hell
SilverBackEl Monte, Ca · Jan 14, 2009#4
Does removing it actually help keep the engine cooler (you know, because the cover is off so there wouldn't be like a "warm blanket" effect)?
YaweshThread starterlong island · Jan 14, 2009#5
danx ppl🤘
TOUGEghostKauai · Jan 14, 2009#6
The cover seems to be for noise suppression (and hiding the wiring mess) more than anything else. My engine seemed louder after I took it off; but after a few days I got used to it and didn't even notice it anymore.
gidNortheast · Jan 15, 2009#7
Originally Posted by TOUGEghost ↑
The cover seems to be for noise suppression (and hiding the wiring mess) more than anything else. My engine seemed louder after I took it off; but after a few days I got used to it and didn't even notice it anymore.
when I removed the plastic engine cover on the 2000 Chevy PRIZM ( Corolla ) to replace the P.C.V. valve , I decided to leave the cover off to see if would help it run cooler during the summer and the valve noise got louder . Put the cover back on and got quieter . Did this several times to double check and remained loud without it , especially when on the interstate ( high speeds ) . The other 1/2 noticed it as well and told me to put it back on , which I did 🙇 . If you do remove it , pull out the plastic push ins of the engine cover out when the engine is cold , otherwise they'll break off in the pre-drilled hole of the valve cover . Learned this myself , had to use a sewing needle to pry it out and buy another push in at dealer . Luckily not too expensive and had them in stock . I think it's usually a special order item .
gidNortheast · Jan 15, 2009#8
if traveling in heavy slow moving traffic it may be worth it to help it remain cooler . Then use a synthetic as well to help tame the noise with / without the cover . All in the ears of the beholder 😁 .
YaweshThread starterlong island · Jan 15, 2009#9
Originally Posted by TOUGEghost ↑
The cover seems to be for noise suppression (and hiding the wiring mess) more than anything else. My engine seemed louder after I took it off; but after a few days I got used to it and didn't even notice it anymore.
never mind then, i alraedy think the yaris is loud already......i can now imagine if i removed it