jmew0ngOriginal postArizona · Jan 13, 2009#1Well I bought my projector(the depoautolight one) off of an ebay store, everything went great except only 3 out of 4 halo's work... my right front halo doesn't work =(
So I was wondering is it possible to just cut the wire connecting to the front left one so it'll look even, or will that completely drop the 2nd one as well?
Replies 6
PHXDEMONPhoenix, AZ · Jan 13, 2009#2Try it and find out 🤷 you can always reconnect wires. I would assume it wouldn't affect it however considering if the LED it burnt out of the other light then it probably isn't completing the circuit.
jmew0ngThread starterArizona · Jan 13, 2009#3Yeah, I'll give that a shot in the morning then.. maybe you'll be able to see my car around phoenix! XD
jinxorSydney, Australia · Jan 14, 2009#4Yep, you can try to remove the connection from the led lights, and try to reconnect them. Or rather, only try and connect the led and see if they are functional.
PETERPOOPOahu · Jan 14, 2009#5Don't be surprised with lights like those.
PHXDEMONPhoenix, AZ · Jan 14, 2009#6 Originally Posted by
jmew0ng ↑ Yeah, I'll give that a shot in the morning then.. maybe you'll be able to see my car around phoenix! XD
If you are ever downtown. I work in park central mall so you can find my car on the upper level in the parking lot in the northwest side 😁
GreenSpeedThe Sea of Salt · Jan 15, 2009#7I just picked up a pair as well off eBay and had the same issue. Simple fix was to go to Radio Shack. They have small white LED's that are the same size that you can solder in place of the old ones. Works great now.