Yarisworld Archive

refinishing alloy rims

11 posts · 3,739 views

thebarberOriginal postGrand Rapids, MI · Jan 11, 2009#1
anyone have any good, inexpensive methods for repainting or refinishing alloy rims?

i picked up a set off an mr2 and i was thinking about repainting them black...

i just want to refinish them such that they wont get scratched up when i get tires mounted....

anyone have ideas?

Replies 10

AdriaanMontreal · Jan 11, 2009#2
It better to get them refinished. There lots of place in montreal that can do it cheaper than toronto. When i went for my rims they said it would be 225$ for the set. If not there powder coating, while will run about 400 for a set.
If you still want to paint them get a place that will sand blast them, it will so much faster and they can get in those hard to reach places. Then head to a napa or any good paint place and get a good primer, if you can try to see what type of metal the rims is and get a primer made for that metal. Then paint away. Did it on my last rims for my paseo. As for mounting you'll have to get a place that handles vw deep dish rims. It mostly those cars that have the stretched tires on the rims, They do a good job.
cali yarisCanoga Park, CA · Jan 11, 2009#3
or tape them off and paint them on the car. that's the CHEAP way!
MUSKOKA800Chatham, Ontario, Canada · Jan 14, 2009#4
Wheel Wizards (in Ontario) was recommended to me by a Firestone dealer. I believe they may be in Hamilton. I've seen their truck a few times over the years.
kimonaHuntington Bch, CA · Jan 14, 2009#5
It takes a bit of time, but it's so easy (and cheap as chips) to sand, colour spray, and clearcoat.
thebarberThread starterGrand Rapids, MI · Jan 14, 2009#6
wheel wizards are in the hammer...i called them when i had to get my superleggera's fixed on my matrix.....but i ended up going to a place in toronto instead....

im just going to resell the alloy rims i have.....too much work to make 'em pretty.....anyone need some winter wheels? ill be back in ON in a month!
m911gtChicago · Jan 14, 2009#7
Originally Posted by cali yaris ↑
or tape them off and paint them on the car. that's the CHEAP way!
I basically did this but took the wheels off of the car...and painted them in my kitchen. Yes, I really did. Haha, what else is a college student with no garage supposed to do? It worked very well and I even cleared them.
severous01SE Texas · Jan 15, 2009#8
3 coats color, 2 coats clear on each....

a good scrubbing with sand paper or blasting works wonders....but definitely dont paint over chrome or clear coat

u need to buff it up a little first.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jan 15, 2009#9
Originally Posted by cali yaris ↑
or tape them off and paint them on the car. that's the CHEAP way!
can you say GHETTO.😳at least take the tires off and try to clean up the wheel a bit before you spray them.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jan 15, 2009#10
Originally Posted by m911gt ↑
I basically did this but took the wheels off of the car...and painted them in my kitchen. Yes, I really did. Haha, what else is a college student with no garage supposed to do? It worked very well and I even cleared them.
😆 i didn't even scroll down far enough to see this . NICE
kimonaHuntington Bch, CA · Jan 16, 2009#11
Sandblasting with silica sand is not recommended for alloy wheels as the sand will actually damage the surface of the alloy. A good shop will use ground walnut shells to minimize damage. Better still, use a chemical dip.