Does anyone know the wheight on the maxxim screech's or the rota flashback's? I know that most people dont like "knock off" wheels but Id rather spend more money on tires than wheels.
Maxxim Weight
18 posts · 3,484 views
Replies 17
what size width and offset
Rota's 15x7 +40
Maxxim's 16x7 +38 13.6 lbs
And found another sat the same style, but still can't find the weight. 😠
Drag DR20's 16x7 +40 12.7 lbs
Really looking at the Maxxims but don't know if they will rub because of the offset being lowwer. If that might be a problem I'll go with The Drags.
Maxxim's 16x7 +38 13.6 lbs
And found another sat the same style, but still can't find the weight. 😠
Drag DR20's 16x7 +40 12.7 lbs
Really looking at the Maxxims but don't know if they will rub because of the offset being lowwer. If that might be a problem I'll go with The Drags.
Maxxim, 16x7, ET38, OEM size 195/50/16 should be fine.
will 2mm of offset difference be the deciding factor on whether they rub or not?Originally Posted by coheed ↑Rota's 15x7 +40
Maxxim's 16x7 +38
And found another sat the same style, but still can't find the weight. 😠
Drag DR20's 16x7 +40
Really looking at the Maxxims but don't know if they will rub because of the offset being lowwer. If that might be a problem I'll go with The Drags.
Not sure thats why I brought it up. I dont honestly know. I'm thinking it all depends on tire choice. But I'm still not gettin the info I wanted. I would like to know how much the weigh each. I'm pretty sure their close but still. Any help would be appreciated. And I have look and searched.
Don't have the weight for you, but yes 2mm makes a significant difference on our cars.
So would +40 or +38 be better? edited the third post.
Ideally, ET42 or greater works best up front. With 15/16's, if you opt for ET38-40, then run 195mm rubber. With ET42 plus, you can run 205mm rubber.
Alright. So I'll go with the Drag's cause thier lighter and have the higher ET.
Here's something very similar on johnnypaseo's Vitz: If I reacll, they're Maxxim 16x7, ET38, with 195/50/16 tyres.
1 attachment not included in this copy
Was he lowered? I plan on gettin Tein's.
i run et38, 205-45 on tein coilovers, no rub
Nice, how low do you have it?
about 2 inches
Do you think I'd rub with just the Tein springs. Bout the same height but softer, obviously. Cant really afford coilovers on a college budget. 🙁
i think you'll be fine.. i could go lower if i wanted.. like another 3/4" or so.. u should be fine
Sweet thanks. 👍