Yarisworld Archive

The Nitrous Thread

117 posts · 611,965 views · page 3 of 3

Replies continued

Nexus1155Dorchester · Aug 27, 2010#101
I just got a vice for my machine and installed the tooling, just gotta figure out how the cam software works then i'll probably be doing the nitrous gig too with a spacer plate.

All you really need is a basic kit, purge would be nice but alot of people don't run them, and a window switch. You can never really go wrong with ZEX. But you want to make sure it activates with TPS and RPMs IE: at 90%+ Throttle Position and from 3000-200rpm before redline. And also an activation button to make sure you don't spray all day long. I doubt you want the thing to be spraying at only 40% throttle either :P

Good luck with your project!

This one looks good, i think its in your picture up there. Goes by TPS and RPM

http://cgi.ebay.com/ebaymotors/MSD-8...item45ef7b41a5
tk-421Dagobah · Aug 27, 2010#102
It's almost like the one on my picture, but this one does TPS as well... Thanks for the find! 👍

Now I need to find an activator switch that fits... I'm getting close!
Faraz_ShaikhPakistan · Sep 24, 2010#103
i'm running nos on 1szfe, 55 dry shots, its good
magillamanchester nh · Oct 7, 2010#104
can i use nitrous on stock intake manifold spraying a 50shot direct inject into each port?
tk-421Dagobah · Oct 7, 2010#105
I don't think the mani would take it TBH... You may be interested in the upcoming offering from MicroImage, which will have optional nitrous ports.

Be prepared to wait a while for that, however...
.Kevin.Prince George, BC. Canada · Oct 7, 2010#106
Yaris bodys can actually handle nos holy crap
magillamanchester nh · Oct 7, 2010#107
will the manifold handle direct inject for each port using 4 wet foggers
magillamanchester nh · Oct 7, 2010#108
if i fab a steel intake manifold up with nitrous ports are people interested to buy them cheaper then the weapon type r intake
cali yarisCanoga Park, CA · Oct 7, 2010#109
^ yes, but only if you do the math so it makes power.
xbgodFlorida · Oct 9, 2010#110
Yeah, you better do the math and it can't look like that ragged piece of crap on the previous page if you intend on selling them.

By the time you get it all figured out and have one as nice as the weapon-R you'll be at the same price.

The purge is a must. It's used to releave bottle pressure. Anything over a 1000 psi your starting to look for trouble. So if it's a hot day and your bottles in the car and it's lets say 1400 psi you gotta purge, other wise it would be like hitting your car with a 200 shot and boom it's over.

I know this first hand, I've done it.

direct port is the best, it allows for even spray across all the cylinders. A fogger kit will not. Most of your NO2 will end up in cylinders 1 and 2 , which in a small shot is not so bad but not so good either.

You want a wet kit, this will be a whole lot safer.

If you want to go direct port than just look at my post and you'll see the weapon-R manifold with the bungs I had welded in, not to mention it's a proven manifold.

Good Building

XBG
blacksandiegovitzJust chillin' out brah ! · Oct 9, 2010#111
Originally Posted by xbgod ↑
Yeah, you better do the math and it can't look like that ragged piece of crap on the previous page if you intend on selling them.

By the time you get it all figured out and have one as nice as the weapon-R you'll be at the same price.

The purge is a must. It's used to releave bottle pressure. Anything over a 1000 psi your starting to look for trouble. So if it's a hot day and your bottles in the car and it's lets say 1400 psi you gotta purge, other wise it would be like hitting your car with a 200 shot and boom it's over.

I know this first hand, I've done it.

direct port is the best, it allows for even spray across all the cylinders. A fogger kit will not. Most of your NO2 will end up in cylinders 1 and 2 , which in a small shot is not so bad but not so good either.

You want a wet kit, this will be a whole lot safer.

If you want to go direct port than just look at my post and you'll see the weapon-R manifold with the bungs I had welded in, not to mention it's a proven manifold.

Good Building

XBG
^^ Hey watch it buddy , that intake mainfold is on my car lol . You need to hurry up and sell me that blitz s/c so I can get it off my car 👍
xbgodFlorida · Oct 9, 2010#112
oh, shit..thats yours....

I wasn't trying to completly run you over but, well.......it is pretty ugly and I don't think your making any exra power with that design.

But don't worry we'll change that.

XBG
blacksandiegovitzJust chillin' out brah ! · Oct 9, 2010#113
Originally Posted by xbgod ↑
oh, shit..thats yours....

I wasn't trying to completly run you over but, well.......it is pretty ugly and I don't think your making any exra power with that design.

But don't worry we'll change that.

XBG
^^ Its all good lol . I got it from the 2007 sema NOS car with all the nitrous nozzles/jets/lines/seloniods for a price I couldn't pass up . As for power mabey picked up a few hp on top-end only and the low end power sucks now. Or I guess I should say "for now"...
2005rsBeaverton ON · Feb 6, 2012#114
I know this is an old post but I thought it better than posting in the general section;

Has anyone hooked up a water/methanol pump to the fuel side of a wet nitrous nozzle? Seems to me that would take care of a lot of the knocking issues and concerns with using lower grades of fuel. (premium fuel is 10cents a litre more where I come from)

I was thinking of making a water meth injection system like this: http://www.turbomirage.com/water-alc...tructions.html
to use in conjunction with a nitrous setup. Then it occurred to me it would be simpler just to hook the water pump up directly to the nitrous system's fuel solenoid.
crazylegsWinnipeg, canada · Apr 29, 2015#115
how much of a shot do you need before the yaris starts knocking?

I'd like the idea of doing an 80 shot direct port injection on the stock engine, then when the car's mileage gets up there most likely in 3-4 years i'll rebuild the bottom end and would like to run much higher shot 200-240hp (50-60hp per cylinder).

i just prefer to use nitrous to have a 12 second yaris then boost cause i like the the idea of having a grocery getter with great MPG 99.9% of the time, and at a flip of a switch have a beast.
crazylegsWinnipeg, canada · Apr 29, 2015#116
Originally Posted by blacksandiegovitz ↑
sale pending from another Yw member on this custom intake manifold set-up for direct port nitrous right now , will post pictures of it installed this weekend !
that intake you posted is ugly as hell but i love it lol
crazylegsWinnipeg, canada · Feb 16, 2016#117
hey i was just curious what you guys are running in the 1/4mile