Sodium DuckOriginal postWestern Mass. · Dec 24, 2008#1Does anyone know of a tach that has an overall diameter of 1 5/8" - 1 3/4" or less?
I'm going to put one into my cluster, where the clock is. I just took it apart and measured, and I think that is the absolute maximum size you can cram into there.
Replies 15
hatchbackkid82. · Dec 24, 2008#2try glowshiftgauges.com
they may have it i've only seen 2" though
Sodium DuckThread starterWestern Mass. · Dec 24, 2008#3I thought these were bigger, as I saw a ton of them on eBay... but they are actually 1.5" wide. Good call.
Only 50 bucks, too. Not bad.
1 attachment not included in this copy
Sodium DuckThread starterWestern Mass. · Dec 24, 2008#44.5" long though... May need to do some cutting lol.
TLyttleKeremeos BC · Dec 24, 2008#5I don't know about you, but I like to be able to read the tach without looking at it, ie, about the same size as the speedo. After awhile, I found that I wasn't using the tach near as much, that I was hearing (quite accurately) how high the rpms were. Maybe all you need to do is rent one for awhile...;-)
Sodium DuckThread starterWestern Mass. · Dec 24, 2008#6I have an automatic, I don't even really want a tach. I just want something to replace the clock, because I hate looking at the time.
It'll also be nice to see if I'm above 1,100 RPM for DFCO. That's it.
ChinoCharlesOH · Dec 24, 2008#7<elitist>I wouldn't put a Glowshift gauge on an enemy's car. When the part you're buying is easily visible to everyone in the car, why cheap out? Spend the extra 20 or 30 bucks and get something worth looking at.</elitist>
cali yarisCanoga Park, CA · Dec 24, 2008#8+1. I'm a dealer for Glowshift, and I just don't care for the product very much. There are a few tachs that are thin, using stepper motors. You could just stick to the face of your gauge cluster if you can find one you like.
ChinoCharlesOH · Dec 24, 2008#9Will companies like Autometer make a custom tach without murdering you on the price? Maybe that is something to look into. Give them a call. My Autometer tach is a little over 2 1/2" and it was only $80, so I think you could expect to pay a little less for something custom and smaller. Never know until you try.
Sodium DuckThread starterWestern Mass. · Dec 24, 2008#10I think it would look better to have an appropriate sized tach mounted nice and flush to the gauge cluster - regardless of whether it is a dreaded glowshift gauge or not.
It's just a tach, and I'm going to paint it, remove the shift lights, etc. You won't know what brand it is anyways.
Hate to disappoint! lol
cali yarisCanoga Park, CA · Dec 24, 2008#11anything custom like that is impressive, don't matter what gadget you put in there, really
Thej3sta2Orlando, FL · Dec 24, 2008#12thats creative placement man.
yarstarGeorgia · Dec 26, 2008#13Dude. This sounds great. Post some picks once you get it done.
KCALB SIRAYVirginia · Dec 26, 2008#14 Originally Posted by
Sodium Duck ↑ I think it would look better to have an appropriate sized tach mounted nice and flush to the gauge cluster - regardless of whether it is a dreaded glowshift gauge or not.
It's just a tach, and I'm going to paint it, remove the shift lights, etc. You won't know what brand it is anyways.
Hate to disappoint! lol
Just make sure you fully understand how the Tach works and is sealed before you take it apart. It's easy to mess with, and just as easy to eff it up👍
Sodium DuckThread starterWestern Mass. · Dec 26, 2008#15auxmikeLI, New Yawk · Dec 26, 2008#16I too have an auto.
I bought the scanguageII, tach's BUILT right into the unit.👍
I installed the SGII under the driver's glovebox door, right in front of me. I don't really use it much though. My main interest are Intake air temp and coolant temp. After I'm done seeing them, I shut the door. I don't like to leave gadjets like that out in plain view while parked.
Also, if I ever did buy a tach, it would be one with a needle, not digi. The SGII tach has a real annoying delay.....🙁