Kaotic LazagnaOriginal postCentral Valley, CA · Dec 23, 2008#1It's been a while since I installed it, so I'm going to try to remember everything step by step. Sorry in advance if I forget something. Here it goes (stupid hackers):
I forgot how long it took to install, but I just remember it longer than it should have since I ended up cutting myself.
Tools needed:
- Philips screw driver
- Box knife
- Dremel (will make it easier, I didn't use one tho since I didn't have one)
- Water (might get dehydrated)
- Ratchet wrench with (I forget what size sockets)
Before:
Step one:
Jack the front of the car up. Unbolt these bolts from the bumper in the wheel-wells.
Step two:
Remove these pop-in/suicide screws (what ever they're called) from the top of the bumper. I used a thin flat head and gently pried them off in a circular fashion.
Step three:
*Read text in pic*
Step four:
*Read text in pic*
Step five:
*Read text in pic*
Not a step, but just showing the damage that the concrete block on the freeway caused:
Showing the locations of the clips (except the side clips)
...continue...
Replies 16
YarisSedanCalifornia - Bay Area · Dec 23, 2008#2Thanks i have my grill thats been sitting in my garage for the longest time. Nows some motivation go go out and install it hehe
Kaotic LazagnaThread starterCentral Valley, CA · Dec 23, 2008#3Step six:
*Read text in pic*
Step seven:
*Read text in pic*
Step eight:
Gently remove stock grill off of the bumper.
Comparison pics:
*Top is the mesh, bottom is the OEM one*
*Also note how the mesh grill doesn't have the screw mounts that the OEM one has*

Kaotic LazagnaThread starterCentral Valley, CA · Dec 23, 2008#4Step nine & 10:
I shave down the tabs on the mesh grill since they were waaaay toooo big to fit in the slots. I also made some of the slots bigger to accommodate the tabs. I used a box knife to do all of this, but I think a dremel will work wonders on the tab. Using some force/coercing, push the tabs into the slots.
*****************IF YOU'RE USING A BOX KNIFE OR SOMETHING SIMILAR, BE REALLY CAREFUL. I cut my thumb in the process, and that took some time to clean up and bandage off.***************
Showing the trimming on the tabs and the slots.
Be careful to not too much force, or else the tab might snap.
It started to rain a little (and started to get dark), so...

Kaotic LazagnaThread starterCentral Valley, CA · Dec 23, 2008#5Step 11:
*Read the text in the pic*
Step 12 & 13:
Put the bumper back on, and screw in all the screws, and push in the pop-in screws. If you have foglights, plug them back in before you put the bumper back in. *I was pressured in time, so I didn't take pics of this*
Step 14:
Step back and look at the difference it makes.

Kaotic LazagnaThread starterCentral Valley, CA · Dec 23, 2008#6 Originally Posted by
YarisSedan ↑ Thanks i have my grill thats been sitting in my garage for the longest time. Nows some motivation go go out and install it hehe
😆
eTiMaGoBangkok, Thailand · Dec 23, 2008#7wheee thanks for putting this back dude 👍
Kaotic LazagnaThread starterCentral Valley, CA · Dec 25, 2008#8 Originally Posted by
eTiMaGo ↑ wheee thanks for putting this back dude 👍
No problem. Has it been added to the compilation of DIY's?
FcukThisseattle · Jan 5, 2009#9Hey jw, Does garm still sell these grills ?
Tried looking on the website for them, but they weren't on there.
did i miss out? :\
Kaotic LazagnaThread starterCentral Valley, CA · Jan 5, 2009#10 Originally Posted by
FcukThis ↑ Hey jw, Does garm still sell these grills ?
Tried looking on the website for them, but they weren't on there.
did i miss out? :\
Who's JW?
You should PM Garm to see if he still has any in stock. It's worth the money.
Pitt YarisPittsburgh · Jan 21, 2009#11did you buy it pre-painted?
hafeezBrampton, Ontario, Canada · Jan 22, 2009#12where can i get one of these grilles?
Kaotic LazagnaThread starterCentral Valley, CA · Jan 22, 2009#13 Originally Posted by
Pitt Yaris ↑ did you buy it pre-painted?
No I did not. I had it professionally painted. Next time I get a mod like this, I'm painting it myself. hehe.
Kaotic LazagnaThread starterCentral Valley, CA · Jan 22, 2009#14 Originally Posted by
hafeez ↑ where can i get one of these grilles?
Contact Garm (Cali Yaris) to see if he has any more sports grill in stock.
Link to a thread or page that is not in the archive 😎
yurishi zuRialto · Jun 11, 2009#15Just wondering where and how much you got your grille
kaiksemhchicago · Apr 19, 2010#16i bought one of those mesh grills from microimage which i paited it myself, my yaris color is flint mica and i painted the grill black and chrome, not bad!!!! i'll post some pictures.
kaiksemhchicago · Apr 19, 2010#17and having trouble installing the grill, this post will help me alot.
thanks kaotic lazagna!!!!!