Yarisworld Archive

Axle Back Question

18 posts · 11,471 views

_S7V7N_Original postSouth Texas · Dec 22, 2008#1
Is the Axle back gonna give the car a lil extra umph or is it just for sound, because the factory piping will still be in place before that which is what 1.5 " or so. I"m just thinking about getting a generic muffler for now and save my money for when i replace from the headers on back with that nice magnaflow setup they have. i still have about a year and a half till i can yank off the header, tht's when my warrenty goes out.

Generic one i found. i know it'll need some custom work to install but shouldn't be more than a few bucks for the piping.
Dimension:
2.5" Inlet, 4" Tip, 18.5" Tip to Tip Long, 5.5" Width
Should give a deep tone.


Picture not included in this copy

Replies 17

cali yarisCanoga Park, CA · Dec 22, 2008#2
An axle-back is basically for sound and looks, I'm going to say you might get 1-2 whp, but others will have other opinions about this.
_S7V7N_Thread starterSouth Texas · Dec 22, 2008#3
That's what i figured, on another note the pipe from the axle back will have to be custom built cause they don't make an actual axle back " adapter " do they ?
Kaotic LazagnaCentral Valley, CA · Dec 22, 2008#4
You can have a shop cut off the factory muffler and weld it on in its position.
gwasabiHonolulu, Hawaii · Dec 22, 2008#5
when i put my greddy tic in i felt a little bit more back pressure. but it wasn't really THAT significant. Just a little nudge
Kaotic LazagnaCentral Valley, CA · Dec 22, 2008#6
Back pressure is a bad thing, better exhaust velocity is a good thing. I think you might have used the wrong term.
_S7V7N_Thread starterSouth Texas · Dec 22, 2008#7
cool deal thanks for the feedback guys.
thebarberGrand Rapids, MI · Dec 22, 2008#8
i think just a muffler would help open up the top end of the yaris powerband....ever see the oem muffler? its super restrictive

however, you will gain more power if you replace the piping from the resonator back...as the res is 2" thru and the piping beyond is 1.75"

Picture not included in this copy

imo, if youre just going to replace the axleback, you likley wouldnt see much of a difference between an axleback and just replacing the muffler...
auxmikeLI, New Yawk · Dec 22, 2008#9
Here's a vid of my TRD axelback in action. It's got a nice fat pipe going to the muffler straight out the box.....
No muss, no fuss. Two bolts and your golden.
Picture not included in this copy
1nzBrunei · Dec 23, 2008#10
mine gained 4whp, cz when i took it of i only got 98hp, with free flow axle back i got 102.8whp
mastaofdisastaamerika · Dec 26, 2008#11
Originally Posted by Kaotic Lazagna ↑
Back pressure is a bad thing, better exhaust velocity is a good thing. I think you might have used the wrong term.
from what i heard...or rather what i was told is that backpressure can be a good thing and that engines do need a certain bit to perform optimally. Now dont quote me on this and i could be wrong...but going with larger exhaust on bigger v8 v6 engines is fine, or turboed supercharged engines, but on engines like ours, i think losing backpressure can actually be not good, therefore backpressure can be a good thing? 🤷
thebarberGrand Rapids, MI · Dec 27, 2008#12
Originally Posted by mastaofdisasta ↑
from what i heard...or rather what i was told is that backpressure can be a good thing and that engines do need a certain bit to perform optimally. Now dont quote me on this and i could be wrong...but going with larger exhaust on bigger v8 v6 engines is fine, or turboed supercharged engines, but on engines like ours, i think losing backpressure can actually be not good, therefore backpressure can be a good thing? 🤷
naturally aspirated engines can still benefit from an increase in exhaust pipe diameter as they are typically made conservatively small from the factory. yaris is 1.75" stock and i cant see any problems w/ going up to 2"....2.25" might be ok too, but id lean towards 2", personally.
Kaotic LazagnaCentral Valley, CA · Dec 29, 2008#13
Originally Posted by mastaofdisasta ↑
from what i heard...or rather what i was told is that backpressure can be a good thing and that engines do need a certain bit to perform optimally. Now dont quote me on this and i could be wrong...but going with larger exhaust on bigger v8 v6 engines is fine, or turboed supercharged engines, but on engines like ours, i think losing backpressure can actually be not good, therefore backpressure can be a good thing? 🤷
Might be true, but a small increase in piping diameter should help rather than hinder the performance.
Never EnoughGrant, MI · Dec 30, 2008#14
agreed ^
SplitEdmonton · Jan 17, 2009#15
dont put an exhaust on the yaris! if anything put on a nitto mid-pipe. when i had the nitto mid-pipe it actually made the car quieter and deeper. the only thing is it made it idle rough when holding the brake while in drive. this might not be a concern for standard transmission owners. the aftermarket exhausts sound kinda ricey except for maybe the vitz one and the trd ones. the nitto one i have is kinda ricey sounding, i think i'm going to add another resonator to quiet it down.

my is300 on the other hand... even with a complete straight pipe its deep! (watch in high quality)
http://www.youtube.com/watch?v=7D29N...e=channel_page
thebarberGrand Rapids, MI · Jan 17, 2009#16
Originally Posted by Split ↑
dont put an exhaust on the yaris! if anything put on a nitto mid-pipe. when i had the nitto mid-pipe it actually made the car quieter and deeper. the only thing is it made it idle rough when holding the brake while in drive. this might not be a concern for standard transmission owners. the aftermarket exhausts sound kinda ricey except for maybe the vitz one and the trd ones. the nitto one i have is kinda ricey sounding, i think i'm going to add another resonator to quiet it down.

my is300 on the other hand... even with a complete straight pipe its deep! (watch in high quality)
http://www.youtube.com/watch?v=7D29N...e=channel_page
ya, but thats 4cyl vs i-6...hard to compare tones

honestly, most 4 cyl engines w/ an exhaust sound similar....and would certainly sound ricey if youre used to a 6cyl's sound
SplitEdmonton · Jan 18, 2009#17
Originally Posted by thebarber ↑
ya, but thats 4cyl vs i-6...hard to compare tones

honestly, most 4 cyl engines w/ an exhaust sound similar....and would certainly sound ricey if youre used to a 6cyl's sound
generally true.. although boxer motors sound quiet different, and turbo 4cyl's. the wrx sti is ridiculously deep and throaty! the new 09 sentra se-r spec-v is an NA 2.5L i4 and its less ricey sounding too. The yaris doesnt sound bad at WOT, especially for a 1.5L.. and especially in car. I bet those tanabe's sound really good in cabin.
Kaotic LazagnaCentral Valley, CA · Jan 20, 2009#18
My Magnaflow does not sound anywhere near ricey. It's nice and deep, a bit on the quiet side tho.