09TRDOriginal postRI · Dec 19, 2008#1I'm looking at Centerlines (forged 6061-T6 alloy). They weigh 14 pounds each and are a bargain.
http://centerlinewheels.com/wheel_de...ehicle&data=33 Picture not included in this copy Anyway, I want a 15" wheel. The size they're offering is a 15" X 7" with a +42 mm offset.
I plan on running a 205/55-15 tire and have the full TRD suspension on the car (springs, shocks, bar).
Is that combination going to give me the clearance I need? I want NO RUBBING AT ALL.
Also, what is the hub diameter for these cars? I've heard 54.1". Is that correct?
I also wanted to verify that the lug spacing is 4 - 100mm.
Replies 60
TamagoOff Grid · Dec 19, 2008#2you are correct on all counts.. try to pick a "narrow" 205/55.. the fuzion zri was a pretty narrow 205 IIRC
TamagoOff Grid · Dec 19, 2008#3curious.. what is a "steal" because that's a pretty heavy 15" wheel
09TRDThread starterRI · Dec 19, 2008#4 Originally Posted by
Tamago ↑ curious.. what is a "steal" because that's a pretty heavy 15" wheel
I don't know what you mean when you ask, "What is a steal?"
14 pounds is incredibly light for a 15" X 7" wheel.
Most cast aluminum wheels in that size weigh between 18 and 19 pounds and aren't as strong.
09TRDThread starterRI · Dec 19, 2008#5 Originally Posted by
Tamago ↑ you are correct on all counts.. try to pick a "narrow" 205/55.. the fuzion zri was a pretty narrow 205 IIRC
Will a "wider" 205/55 rub with that wheel?
TamagoOff Grid · Dec 19, 2008#6 Originally Posted by
09TRD ↑ 14 pounds is incredibly light for a 15" X 7" wheel.
Most cast aluminum wheels in that size weigh between 18 and 19 pounds and aren't as strong.
12lbs is about average for a 15x7 "light" 15x7
a LIGHT 15x7 weighs under 10lbs
http://edgeracing.com/wheel/7866/ TamagoOff Grid · Dec 19, 2008#7 Originally Posted by
09TRD ↑ Will a "wider" 205/55 rub with that wheel?
read up on section widths and tread widths on tirerack.com
i think you should clear a +42 ok with no rubbing issues.. what tire were you looking to get?
TamagoOff Grid · Dec 19, 2008#8 Originally Posted by
09TRD ↑ I don't know what you mean when you ask, "What is a steal?"
i mean, how much are you getting them for?
09TRDThread starterRI · Dec 19, 2008#9 Originally Posted by
Tamago ↑
How many ten pound wheels do you see here?
http://www.tirerack.com/wheels/resul...ar=&sort=Brand 19 pounds is about average for the TYPICAL 15 X 6.5" - 15" X 7" gravity cast aluminum wheel.
Racing wheels tend to bend on bad pavement (e.g. potholes, which our roads are full of). I don't want that. I want a robust wheel that's designed to handle the realities of STREET use.
Oh, I'm 45 and have a degree in mechanical engineering.
Go anything else you want to ask?
TamagoOff Grid · Dec 19, 2008#10 Originally Posted by
09TRD ↑
you're looking in the wrong places then..
www.goodwinracing.com will point you in the direction of quality wheels..
09TRDThread starterRI · Dec 19, 2008#11TamagoOff Grid · Dec 19, 2008#12 Originally Posted by
09TRD ↑
for forged, absolutely..
but for forged it's on the WAY heavy side
09TRDThread starterRI · Dec 19, 2008#13 Originally Posted by
Tamago ↑ you're looking in the wrong places then..
www.goodwinracing.com will point you in the direction of quality wheels..
I am not interested in a RACING WHEEL because they bend on bad pavement.
I want a STREET wheel that will handle potholes and broken pavement, which our roads are packed with.
Russelt3hPirateEpcot · Dec 19, 2008#14 Originally Posted by
09TRD ↑ How many ten pound wheels do you see here?
http://www.tirerack.com/wheels/resul...ar=&sort=Brand 19 pounds is about average for the TYPICAL 15 X 6.5" - 15" X 7" gravity cast aluminum wheel.
Racing wheels tend to bend on bad pavement (e.g. potholes, which our roads are full of). I don't want that. I want a robust wheel that's designed to handle the realities of STREET use.
Oh, I'm 45 and have a degree in mechanical engineering.
Go anything else you want to ask?
I have sub 10lb wheels on our Yaris.
Enkei RPF1s are sub 10lbs if you don't want to spend big $$ on wheels.
a 19lb 15" wheel is insane, i've had 17x8s that were that light.
09TRDThread starterRI · Dec 19, 2008#15 Originally Posted by
Tamago ↑ for forged, absolutely..
but for forged it's on the WAY heavy side
That's because it is a STRONG wheel designed primarily for use (and abuse) on the street.
Look at that wheels thick spokes; they're "heavy" because they are very strong.
09TRDThread starterRI · Dec 19, 2008#16 Originally Posted by
Russelt3hPirate ↑ ...a 19lb 15" wheel is insane, i've had 17x8s that were that light.
It's also TYPICAL for a gravity cast aluminum wheel in that size.
This FORGED 6061-T6 is very strong; check out the robust size and shape of the spokes.
It is designed primarily as a street wheel with the realities of street driving (ruts, potholes, frost-heaves and expansion joints) in mind.
Picture not included in this copy Russelt3hPirateEpcot · Dec 19, 2008#17 Originally Posted by
09TRD ↑ It's also TYPICAL for a gravity cast aluminum wheel in that size.
This FORGED 6061-T6 is very strong; check out the robust size and shape of the spokes.
It is designed primarily as a street wheel with the realities of street driving (ruts, potholes, frost-heaves and expansion joints) in mind.
Picture not included in this copy
so you're saying my 9.9lb wheels will bend if I hit something?
is that a different wheel then the one on the first page?
I'm checking them and they're ugly as sin.
do you like the style? do you like the price?
then buy them, but they are not "light" when compared to the available wheels out there.
09TRDThread starterRI · Dec 19, 2008#18 Originally Posted by
Russelt3hPirate ↑ ...Enkei RPF1s are sub 10lbs if you don't want to spend big $$ on wheels.
That's a gravity cast wheel with very thin spokes.
That wheel wouldn't hold up on the roads here in the Northeast.
While it's heavier, the forged and polished Centerline is a vastly stronger, higher quality wheel.
TamagoOff Grid · Dec 19, 2008#19 Originally Posted by
09TRD ↑ I am not interested in a RACING WHEEL because they bend on bad pavement.
I want a STREET wheel that will handle potholes and broken pavement, which our roads are packed with.
i have a set of team dynamics that are very low offset (read: heavy) 12.6lbs that i've used on the street and track for 4 years now, no bends no cracks..
09TRDThread starterRI · Dec 19, 2008#20 Originally Posted by
Russelt3hPirate ↑ so you're saying my 9.9lb wheels will bend if I hit something?.
Yep, that's what I'm saying.
Any "racing" wheel will bend on roads like those we have here in the Northeast.
I've seen several Enkeis fold like accordians up here.
09TRDThread starterRI · Dec 19, 2008#21 Originally Posted by
Tamago ↑ i have a set of team dynamics that are very low offset (read: heavy) 12.6lbs that i've used on the street and track for 4 years now, no bends no cracks..
That's believable.
But a 12.6 pound wheel has nearly 30% more material than those sub 10 pound "racing" Enkeis.
I want a nice looking, strong, forged wheel for under $200 that can handle the beating of these roads.
TamagoOff Grid · Dec 19, 2008#22 Originally Posted by
09TRD ↑ That's a gravity cast wheel with very thin spokes.
That wheel wouldn't hold up on the roads here in the Northeast.
While it's heavier, the forged and polished Centerline is a vastly stronger, higher quality wheel.
ok, so you're set on the centerline.. let's drop it because we think you're wrong and you think we're wrong.. you're going to a wheel that's about the same weight as stock steelies
your offset will be fine..
you have the correct hub bore
stick to that low section width 205
i'm out..
09TRDThread starterRI · Dec 19, 2008#23 Originally Posted by
Tamago ↑ ok, so you're set on the centerline.. let's drop it because we think you're wrong and you think we're wrong.. you're going to a wheel that's about the same weight as stock steelies
your offset will be fine..
you have the correct hub bore
stick to that low section width 205
i'm out..
The wheel I'm talking about that weighs 15 pounds is a 17" diameter wheel.
They don't list the weight for the 15" version, though it would obviously be lighter:
http://centerlinewheels.com/wheels_d...d=36&sw_id=263 "Our 17" wheel weighs only 15 lbs!"
TamagoOff Grid · Dec 19, 2008#24then how come it says:
This 15-inch forged wheel weighs only 14 lbs and is stronger than a cast wheel ! ++
09TRDThread starterRI · Dec 19, 2008#25 Originally Posted by
Tamago ↑ then how come it says:
14 pounds is light for an aluminum STREET wheel with a 1,200 pound load rating.
Racing wheels can be lighter because tracks aren't full of potholes, frostheaves and expansion joints.
Drive a 10 pound racing wheel on these roads and see how long it lasts.
http://www.6speedonline.com/forums/w...treet-use.html "A word on BBS Race wheels for street use
I see many inquiries and threads on these wheels, and I think it's fair to warn people that don't know that these wheels were not designed for street use and BBS does not recommend them to be used off of a track. The barrel sections are roll formed and they are considerably thinner on these wheels than they would be on one of their road wheels. It saves weight, but it makes the wheel much more likely to be damaged by potholes, etc."
Russelt3hPirateEpcot · Dec 19, 2008#26 Originally Posted by
09TRD ↑ Yep, that's what I'm saying.
Any "racing" wheel will bend on roads like those we have here in the Northeast.
I've seen several Enkeis fold like accordians up here.
I don't have enkeis.
So my CCWs will bend on your roads? but they weigh 25lbs for a 17x10?
please help me understand your logic and where your basis of argument is coming from.
by adding more material increasing weight does not automatically make a wheel "stronger" then a lighter counterpart.
I've also seen higher weight wheels bend. Alot of times it's due to the tire pressure being overly low, or the sidewall height being too short for the type of road.
Wheels are designed to bend when an extreme situation happens, it's better for them to bend then break.
by your "weight" standards those 17" centerlines wouldn't put up to squat. So what makes you think their 15" version is worth anything? because the website said so? :lol:
I feel spoke design (less spacing between spokes), proper sidewall height, proper tire pressure, and as much as safe pothole avoidance is going to save your wheels more then adding 2lbs of metal somewhere.
Russelt3hPirateEpcot · Dec 19, 2008#27 Originally Posted by
09TRD ↑ 14 pounds is light for an aluminum STREET wheel with a 1,200 pound load rating.
Racing wheels can be lighter because tracks aren't full of potholes, frostheaves and expansion joints.
Drive a 10 pound racing wheel on these roads and see how long it lasts.
http://www.6speedonline.com/forums/w...treet-use.html "A word on BBS Race wheels for street use
I see many inquiries and threads on these wheels, and I think it's fair to warn people that don't know that these wheels were not designed for street use and BBS does not recommend them to be used off of a track. The barrel sections are roll formed and they are considerably thinner on these wheels than they would be on one of their road wheels. It saves weight, but it makes the wheel much more likely to be damaged by potholes, etc."
so bc a specific BBS "race" wheel isn't meant for street use all light weight wheels don't pass your strict testing? 🙄
09TRDThread starterRI · Dec 19, 2008#28 Originally Posted by
Russelt3hPirate ↑ I don't have enkeis.
So my CCWs will bend on your roads? but they weigh 25lbs for a 17x10?
please help me understand your logic and where your basis of argument is coming from.
by adding more material increasing weight does not automatically make a wheel "stronger" then a lighter counterpart.
I've also seen higher weight wheels bend. Alot of times it's due to the tire pressure being overly low, or the sidewall height being too short for the type of road.
Wheels are designed to bend when an extreme situation happens, it's better for them to bend then break.
by your "weight" standards those 17" centerlines wouldn't put up to squat. So what makes you think their 15" version is worth anything? because the website said so? :lol:
I feel spoke design (less spacing between spokes), proper sidewall height, proper tire pressure, and as much as safe pothole avoidance is going to save your wheels more then adding 2lbs of metal somewhere.
I'm telling you that any "RACING" wheel isn't designed for STREET use.
Period.
That's because the barrel sections and the spoke sections are much thinner than what would be considered appropriate for STREET use.
Race tracks are SMOOTH, so thinner walls (which means lighter weight) are OK there.
Those Centerlines are thick-walled, FORGED 6061-T6 wheels.
They are MUCH stronger than any thin walled, cast wheel.
6061-T6's mechanical properties (e.g. yield strength) blow away the properties of cast aluminums.
http://en.wikipedia.org/wiki/6061_aluminum Compare those propertied to A356 aluminum, which is the most common aluminum used in cast wheels:
http://www.mse.mtu.edu/classes/my413...inum/a356.html TamagoOff Grid · Dec 19, 2008#29i think this guy should change his thread title to "seeking advice from people who will agree with me"
because you're talking right now to two people who KNOW
TamagoOff Grid · Dec 19, 2008#30 Originally Posted by
09TRD ↑ I'm telling you that any "RACING" wheel isn't designed for STREET use.
Period.
That's because the barrel sections and the spoke sections are much thinner than what would be considered appropriate for STREET use.
Race tracks are SMOOTH, so thinner walls (which means lighter weight) are OK there.
question...
what makes a wheel a "racing" wheel? are AMERICAN RACING wheels RACING wheels because their name has RACING in it?
09TRDThread starterRI · Dec 19, 2008#31 Originally Posted by
Tamago ↑ question...
what makes a wheel a "racing" wheel?...
http://www.6speedonline.com/forums/w...treet-use.html "A word on BBS Race wheels for street use
I see many inquiries and threads on these wheels, and I think it's fair to warn people that don't know that these wheels were not designed for street use and BBS does not recommend them to be used off of a track.
The barrel sections are roll formed and they are considerably thinner on these wheels than they would be on one of their road wheels. It saves weight, but it makes the wheel much more likely to be damaged by potholes, etc."
Cast aluminum racing wheels are typically made from A356 aluminum and are very light. By definition they can't be strong, since the material properties of that aluminum are quite low and since real racing wheels use very thin walls (in the barrel and the spokes).
Here are the material properties of A356, which is the most commonly used aluminum in cast wheels. They are laughable compared to a good forging:
http://www.mse.mtu.edu/classes/my413...inum/a356.html Centerline wheels are fabricated exclusively from 6061-T6, which is a forged, aircraft grade aluminum. They also use thick walls, since they are designed primarily for STREET use.
http://asm.matweb.com/search/Specifi...ssnum=MA6061T6 Russelt3hPirateEpcot · Dec 19, 2008#32 Originally Posted by
09TRD ↑ I'm telling you that any "RACING" wheel isn't designed for STREET use.
Period.
That's because the barrel sections and the spoke sections are much thinner than what would be considered appropriate for STREET use.
Race tracks are SMOOTH, so thinner walls (which means lighter weight) are OK there.
Those Centerlines are thick-walled, FORGED 6061-T6 wheels.
They are MUCH stronger than any thin walled, cast wheel.
6061-T6's mechanical properties (e.g. yield strength) blow away the properties of cast aluminums.
http://en.wikipedia.org/wiki/6061_aluminum Compare those propertied to A356 aluminum, which is the most common aluminum used in cast wheels:
http://www.mse.mtu.edu/classes/my413...inum/a356.html
I'm just trying to understand your logic, you keep repeating the same thing over and over without actually addressing anything.
Would you consider a wheel that meets JWL standards good enough for the street?
The wheels I have are 15x7 +35mm Forged, so am I good to go?
I'd like to see a list of companies you feel make quality street wheels, just to get an idea of what you consider a "street" wheel.
I'm also curious if you're lumping all BBS wheels in with the "BBS Racing" wheels. I've had BBS wheels on my other car for ages now and they have held up amazingly well.
also, not all race tracks are smooth, and track wheels generally face more strain then your average street wheel. You ever hit a berm at 45 mph? those aren't little rumble strips like you feel on your xbox. :lol:
it's funny, I hear the exact opposite logic from people daily. "these wheels wont see the track so I don't need something forged/strong/stay in one piece"
and now you're saying that a quality wheel that is lightweight and forged is going to bend used on the street?
can you define "racing" wheel for us.
LorenSafety Harbor, FL · Dec 19, 2008#3314 pounds isn't "obscenely heavy" for a 15x7, but it's not exactly "light", either.
My 15x7 Falken Hanabi's weigh just a tick over 11 pounds each and cost about $89 each. THAT is light and cheap. But, not everyone likes the styling. My goals were "light and cheap", so I didn't care.
To answer your rubbing question: I'd stick with 195/55's. I've not had any rubbing with those. Had some with 215/50's (Toyo T1-R, which were actually closer to 205). And I'm on 15x7 with 41mm offset.
I also had rubbing on the upper fender liner under hard cornering with 195/55's on a 15x7 with 32mm offset. Definitely stick with offset in the 40-45mm range unless you value the bling of "flushness" more than not rubbing.
Russelt3hPirateEpcot · Dec 19, 2008#34 Originally Posted by
09TRD ↑ http://www.6speedonline.com/forums/w...treet-use.html "A word on BBS Race wheels for street use
I see many inquiries and threads on these wheels, and I think it's fair to warn people that don't know that these wheels were not designed for street use and BBS does not recommend them to be used off of a track.
The barrel sections are roll formed and they are considerably thinner on these wheels than they would be on one of their road wheels. It saves weight, but it makes the wheel much more likely to be damaged by potholes, etc."
Cast aluminum racing wheels are typically made from A356 aluminum and are very light. By definition they can't be strong, since the material properties of that aluminum are quite low and since real racing wheels use very thin walls (in the barrel and the spokes).
Here are the material properties of A356, which is the most commonly used aluminum in cast wheels. They are laughable compared to a good forging:
http://www.mse.mtu.edu/classes/my413...inum/a356.html
we got it, you read somewhere that a racing wheel from BBS isn't for the street 👏
there are plenty of Racing wheels that aren't designed for street use and are sold as exactly that "only for Racing". Not all wheels that are light were designed with that one goal in mind, many wheels you would consider "race" wheels were designed for dual duty purposes and can handle the rigors of street use assuming you're not a retard.
will you please answer our questions?
Russelt3hPirateEpcot · Dec 19, 2008#35 Originally Posted by
Loren ↑ unless you value the bling of "flushness" more than not rubbing.
with the proper setup you can have bling flushness and no rubbing. :)
just takes a little extra work.
09TRDThread starterRI · Dec 19, 2008#36 Originally Posted by
Russelt3hPirate ↑ we got it, you read somewhere that a racing wheel from BBS isn't for the street 👏
there are plenty of Racing wheels that aren't designed for street use and are sold as exactly that "only for Racing". Not all wheels that are light were designed with that one goal in mind, many wheels you would consider "race" wheels were designed for dual duty purposes and can handle the rigors of street use assuming you're not a retard.
will you please answer our questions?
Manufacturers go to extremes to save weight and increase fuel economy.
Cast aluminum wheels are common in OEM applications.
Show me just ONE OEM cast wheel that weighs anything close to 10 pounds. (20 pounds is closer to realty for most 15" and 16" OEM aluminum wheels).
You can't - despite the fact that such a wheel would be "win win" for the manufactures since they'd be CHEAPER to build (less material) and would yield a slight gain in fuel economy (lower weight and reduced rotating intertia).
So why don't they do it?
Answer: Because such a wheel would produce a flood of warranty claims in the form of bent rims.
Thin wall, cast aluminum wheels will BEND on roads like we have here in the Northeast and I've personally seen dozens that have.
Russelt3hPirateEpcot · Dec 19, 2008#37 Originally Posted by
09TRD ↑ Manufacturers go to extremes to save weight and increase fuel economy.
Cast aluminum wheels are common in OEM applications.
Show me just ONE OEM cast wheel that weighs anything close to 10 pounds. (20 pounds is closer to realty for most 15" and 16" OEM aluminum wheels).
You can't - despite the fact that such a wheel would be "win win" for the manufactures since they're be CHEAPER to build (less material) and would increase a slight gain in fuel economy (lower weight and rotating intertia).
So why don't they do it?
Answer: Because such a wheel would produce a flood of warranty claims in the form of bent rims.
since when are we talking OEM's?
OEM wheels also need to stand up to some dumb girl running over a curb at 35 mph and being able to go home and not tell mommy.
I'll try and re-organize our questions for you in a easier to read format. BRB.
09TRDThread starterRI · Dec 19, 2008#38 Originally Posted by
Loren ↑ 14 pounds isn't "obscenely heavy" for a 15x7, but it's not exactly "light", either.
My 15x7 Falken Hanabi's weigh just a tick over 11 pounds each and cost about $89 each. THAT is light and cheap. But, not everyone likes the styling. My goals were "light and cheap", so I didn't care.
To answer your rubbing question: I'd stick with 195/55's. I've not had any rubbing with those. Had some with 215/50's (Toyo T1-R, which were actually closer to 205). And I'm on 15x7 with 41mm offset.
I also had rubbing on the upper fender liner under hard cornering with 195/55's on a 15x7 with 32mm offset. Definitely stick with offset in the 40-45mm range unless you value the bling of "flushness" more than not rubbing.
Thanks for the advice.
Living here in the Northeast (pothole and frost-heave ravaged roads), I value strength.
I have yet to see an OEM aluminum wheel bend in this area, yet I've seen dozens of lightweight, cast aftermarket wheels bend.
Such is the cost of reducing weight by effectively removing material.
09TRDThread starterRI · Dec 19, 2008#39 Originally Posted by
Russelt3hPirate ↑ since when are we talking OEM's?
OEM wheels also need to stand up to some dumb girl running over a curb at 35 mph and being able to go home and not tell mommy.
I'll try and re-organize our questions for you in a easier to read format. BRB.
The fact of the matter is that 15" - 16" OEM aluminum wheels weigh ~ 20 pounds because they are cast (cheaper than forgings), yet still must be ROBUST enough to deal with the rigors of street use. That means thick barrel sections and reasonably robust spokes (each of which adds weight).
The manufacturers would save money AND increase fuel economy if they could use 10 pounds wheels of the same size instead.
They don't because warranty claims (in the form of bent/damaged wheels) would skyrocket in areas like the Northeast.
Any 15"+ cast aluminum wheel that is lighter than 17.5 pounds or so is pushing the limit of impact-related durability in street applications.
Anyone who wants a wheel in that size that is LIGHTER than that AND values durability on the street would be wise to choose a forging.
Russelt3hPirateEpcot · Dec 19, 2008#40here's a little list of questions for you.
Would you consider a wheel that meets JWL standards good enough for the street?
The wheels I have are 15x7 +35mm Forged, so am I good to go?
I'd like to see a list of companies you feel make quality street wheels, just to get an idea of what you consider a "street" wheel.
I'm also curious if you're lumping all BBS wheels in with the "BBS Racing" wheels. I've had BBS wheels on my other car for ages now and they have held up amazingly well.
So my CCWs will bend on your roads? but they weigh 25lbs for a 17x10?
by your "weight" standards those 17" centerlines wouldn't put up to squat. So what makes you think their 15" version is worth anything? because the website said so?
so bc a specific BBS "race" wheel isn't meant for street use all light weight wheels don't pass your strict testing?
what makes a wheel a "racing" wheel? are AMERICAN RACING wheels RACING wheels because their name has RACING in it?
Russelt3hPirateEpcot · Dec 19, 2008#41 Originally Posted by
09TRD ↑ Thanks for the advice.
Living here in the Northeast (pothole and frost-heave ravaged roads), I value strength.
I have yet to see an OEM aluminum wheel bend in this area, yet I've seen dozens of lightweight, cast aftermarket wheels bend.
Such is the cost of reducing weight by effectively removing material.
I've seen an OEM aluminum wheel fall apart in NJ.
09TRDThread starterRI · Dec 19, 2008#42 Originally Posted by
Russelt3hPirate ↑ I've seen an OEM aluminum wheel fall apart in NJ.
There are perhaps 5,000 of them for every one aftermarket wheel.
Try running a 10 pound aftermarket "racing wheel" in the NJ streets and see how long it lasts. 🤣
Russelt3hPirateEpcot · Dec 19, 2008#43 Originally Posted by
09TRD ↑ The fact of the matter is that 15" - 16" OEM aluminum wheels weigh ~ 20 pounds because they are cast (cheaper than forgings), yet still must be ROBUST enough to deal with the rigors of street use. That means thick barrel sections and reasonably robust spokes (each of which adds weight).
The manufacturers would save money AND increase fuel economy if they could use 10 pounds wheels of the same size instead.
They don't because warranty claims (in the form of bent/damaged wheels) would skyrocket in areas like the Northeast.
Any 15"+ cast aluminum wheel that is lighter than 17.5 pounds or so is pushing the limit of impact-related durability in street applications.
Anyone who wants a wheel in that size that is LIGHTER than that AND values durability on the street would be wise to choose a forging.
Is this blue's clues? are you repeating yourself assuming we can't read?
come on now. I'd be more than happy to continue debating the value of an OEM wheel and why only a select few use Forged wheels, but that wasn't the topic of conversation.
I have a strong feeling you wanted someone to just agree with you and say "yes good choice" instead of someone actually criticizing your decision of picking a crappy wheel, at least they aren't knock offs.
09TRDThread starterRI · Dec 19, 2008#44 Originally Posted by
Russelt3hPirate ↑ by your "weight" standards those 17" centerlines wouldn't put up to squat.
Do you understand the difference between a 6061-T6 FORGING and a sand casting (e.g. A356)? 🤷
The Centerlines are FORGINGS (6061-T6). As such, they have a MUCH higher strength-to-weight ratio than cast wheels.
The forging is 1.5X as strong (35,000 PSI YIELD vs. 24,000 PSI YIELD for the casting).
In other words, the forged wheel could weigh roughly TWO-THIRDS that of its cast counterpart and still be just as strong.
Russelt3hPirateEpcot · Dec 19, 2008#45 Originally Posted by
09TRD ↑ There are perhaps 5,000 of them for every one aftermarket wheel.
Try running a 10 pound aftermarket "racing wheel" in the NJ streets and see how long it lasts. 🤣
I'm sure people do, in fact I know people running 18" variants of my wheel (not 10 lbs since it's a 18" wheel) but they aren't destroyed as you seem to be implying.
also, if a wheel is damaged by the state owned roads you can get the state to buy you a new wheel.
Seen it done numerous times when it is properly documented.
Russelt3hPirateEpcot · Dec 19, 2008#46 Originally Posted by
09TRD ↑ The Centerlines are FORGINGS. As such, they have a MUCH higher strength to weight ratio.
Do you understand the difference between a 6061-T6 FORGING and a sand casting (e.g. A356)?
The forging is 1.5X as strong (35,000 PSI YIELD vs. 24,000 PSI YIELD for the casting).
In other words, the forged wheel could weigh roughly TWO-THIRDS that of its cast counterpart and still be just as strong.
Thus, a 14 pound FORGED 15" wheel is actually quite strong.
Yes I understand.
so my 9.9lb Forged wheels are going to break? any minute now?
Are my wheels considered racing wheels and have an inferior build to your centerlines?
TamagoOff Grid · Dec 19, 2008#47 Originally Posted by
Russelt3hPirate ↑ with the proper setup you can have bling flushness and no rubbing. :)
just takes a little extra work.
hours of labor at the alignment rack 😳
09TRDThread starterRI · Dec 19, 2008#48 Originally Posted by
Russelt3hPirate ↑ I'm sure people do, in fact I know people running 18" variants of my wheel (not 10 lbs since it's a 18" wheel) but they aren't destroyed as you seem to be implying.
also, if a wheel is damaged by the state owned roads you can get the state to buy you a new wheel.
Seen it done numerous times when it is properly documented.
A wheel's strength is dictated primarily by it's wall thicknesses and it's material. (Spoke placement and the number of spokes is also a factor.)
A cast 15" wheel that weighs 10 pounds cannot, by definition, be a strong wheel in terms of impact loading (e.g. hitting a pothole).
Conversely, a forged (e.g. 6016-T6) 15" wheel that weighs 14 pounds will likely be VERY strong.
TamagoOff Grid · Dec 19, 2008#49 Originally Posted by
09TRD ↑
Thin wall, cast aluminum wheels will BEND on roads like we have here in the Northeast and I've personally seen dozens that have.
thin wall
FORGED ALUMINUM WHEELS will bend as well, depending on the stupidity of the driver..
my wheels, Team Dynamic Pro Race 1's are used in the BTCC (in monohub form) and are a cast wheel..
now.. does that make them race wheels or street wheels?
TamagoOff Grid · Dec 19, 2008#50 Originally Posted by
09TRD ↑ A wheel's strength is dictated primarily by it's wall thicknesses and it's material.
A cast 15" wheel that weighs 10 pounds cannot, by definition, be a strong wheel in terms of impact loading (e.g. hitting a pothole).
so you'd rather drive around on wheels that look like they should be on a 1977 ford falcon simply because they're FORGED???
why are you buying wheels in the first place?