Sodium DuckOriginal postWestern Mass. · Dec 11, 2008#1How did you take apart the air vent directional things to paint? Did you leave them in place, or take them completely apart?
I just painted my temperature control knob bezel thing - that was easy. 150 grit, 400 grit, 2 coats of primer, about 5 coats of flat black, looks good so far.
Emblems are up next!
Replies 34
TinyGiantRochester, NH · Dec 11, 2008#2i took the bezel off the air vents.. i didnt paint them .. i like them being whiteish in color..
Picture not included in this copy
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#3Hm, when I took my dash apart, the air vents came off with that dash piece. Well, I've got a lot of fiddling to do lol.
Here's a teaser pic so far. I can't wait to get my 2009 black climate control knobs - gonna look hot!
1 attachment not included in this copy
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#4Note: Be very careful when pulling apart the air directional control things. They have these tiny little inserts into a linkage, and they break off very easily...
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#5So here's some pics. This is what I did for all the pieces I'm painting.
Took some 150 grit sand paper, and scuffed everything up really good.
Took some 400 grit sand paper and made it all really smooth.
Two coats of primer. Then 5+ coats of flat black (I lost count I did so many).
Also, have a pic of the easiest way to paint those damn little air vent things. I hate painting small things.
Oh, and I was able to epoxy on the little piece I broke off. haha
5 attachments not included in this copy
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#6lalalaaa, I hate sanding!
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#7Just did two more coats to the upper trim piece. Installed the lower trim piece into the car. Lookin' good!
yarisugiハワイ · Dec 12, 2008#8Can you go straight to 400 grit and skip the 150?
Sodium DuckThread starterWestern Mass. · Dec 12, 2008#9If you have like 9,000 sheets of 400 and a case of booze... It's gonna take a long time to scuff it up enough.
Yaris_PRPuerto Rico · Dec 12, 2008#10 Originally Posted by
Sodium Duck ↑ Note: Be very careful when pulling apart the air directional control things. They have these tiny little inserts into a linkage, and they break off very easily...
That's happen to me...I broke every one. 🙁
Your doing a very nice job there...👏
CTScottUSA, CT · Dec 12, 2008#11Now that you're painting the radio trim, when get your new HU and HAM radio, you can make your own 180mm opening one with some bondo.
CrandallNo Funswick · Dec 12, 2008#12Are you going to seal it with anything?
After seeing the effort you've put in kinda makes me glad I got a Canadian RS and saved myself the trouble. Everything is already black.
nerd_vitZSan Diego · Dec 12, 2008#13how did you paint the a/c dials? where the numbers/pics are at.
Sodium DuckThread starterWestern Mass. · Dec 13, 2008#14 Originally Posted by
nerd_vitZ ↑ how did you paint the a/c dials? where the numbers/pics are at.
Which?
Sodium DuckThread starterWestern Mass. · Dec 13, 2008#15I thought about it a lot, and I think I actually like it better being wider. The bondo will have to be somebodies elses project, lol.
I'm not sealing it. I like it all flat and raw looking like that. About 10 coats of paint, I think it'll hold up... haha.
2 attachments not included in this copy
ROCKLAND TOYOTAROCKLAND COUNTY NY · Dec 13, 2008#16 Originally Posted by
Crandall ↑ After seeing the effort you've put in kinda makes me glad I got a Canadian RS and saved myself the trouble. Everything is already black.
i did the opposite and ordered all the canadian RS trim pieces....
Sodium DuckThread starterWestern Mass. · Dec 13, 2008#17A-pillar's, etc. too?
How much?
Pics of your interior?
Sodium DuckThread starterWestern Mass. · Dec 17, 2008#18done-ski
2 attachments not included in this copy
WeeYariGeorgetown, Ontario, Canada · Dec 17, 2008#19A1 job. What paint did you use? It's perfect.
Sodium DuckThread starterWestern Mass. · Dec 17, 2008#20Krylon Indoor/Outdoor Flat Black
$4.00/can at WalMart
CTScottUSA, CT · Dec 17, 2008#21That looks so much better than the out-of-place silver, especially with the 09 knob!
jinxorSydney, Australia · Dec 17, 2008#22yes... that is a nice idea... I might as well hop on the DIY and do iti myself....
tk-421Dagobah · Dec 17, 2008#23@Sodium Duck: Looks great! How much will it cost to get all three 09 knobs? I think I'm gonna do the same thing to my car. 👍
Sodium DuckThread starterWestern Mass. · Dec 18, 2008#24Thanks for the props everybody.
TK, it'll prolly be like 150ish. The one I bought was about 40, then the other two are about 50 each.
LtNoogieWest Hills, CA · Dec 18, 2008#25I thought that I would not like it when I started reading your post but the flat black looks really good.
NorkotikEl Monte CA · Dec 18, 2008#26that shit looks tight
bzinn 1University Place,WA · Dec 19, 2008#27looks great......I gotta do the 09 knob mod too.....same knobs are in the xD as well.
lilredrocketDFW, Texas · Dec 19, 2008#28After seeing his in flat black it changed my mind from doing mine red to flat black too when installed it looks like it came that way for the factory
puetato89orlando · Dec 19, 2008#29heres mine... i just finished painting the doors ill take a pic and put it on here Way to tired 2 go outside
1 attachment not included in this copy
falkor_99OC · Dec 19, 2008#30 Originally Posted by
puetato89 ↑ heres mine... i just finished painting the doors ill take a pic and put it on here Way to tired 2 go outside
dude that is sick.....that is what i want to do with mine, but im not sure what blue to do it
puetato89orlando · Dec 19, 2008#31just use the blazin blue paint......paint code: 8T0
ROCKLAND TOYOTAROCKLAND COUNTY NY · Dec 19, 2008#32 Originally Posted by
Sodium Duck ↑ A-pillar's, etc. too?
How much?
Pics of your interior?
pillars as well as door panels......
Pitt YarisPittsburgh · Dec 19, 2008#33i can't wait to do mine in flint mica, and put clearcoat on it, etc.
Sodium DuckThread starterWestern Mass. · Dec 19, 2008#34 Originally Posted by
puetato89 ↑ heres mine... i just finished painting the doors ill take a pic and put it on here Way to tired 2 go outside
Can't wait to see the doors. What did you do for prep?
puetato89orlando · Dec 19, 2008#35i only did the silver peices on the door
wet sanded with 1000 grit, sprayed bulldog(plastic adhesive promoter), base then clear