Yarisworld Archive

Painting Inside Tail Lamp.

8 posts · 3,792 views

Wisher23Original postBay Area · Dec 10, 2008#1
I received a set of replica taillights that were leaking. As i opened it up to reseal, i scratched off some chrome off the bezel. All i can think of doing is repainting it. i was thinking a dark color, but i dunno what its going to do to the effectiveness of the brake lights. Or if anyone can recommend some chrome paint in a can? What y'all think?

Picture not included in this copy

Picture not included in this copy

Replies 7

tk-421Dagobah · Dec 10, 2008#2
Originally Posted by Wisher23 ↑
I received a set of replica taillights that were leaking. As i opened it up to reseal, i scratched off some chrome off the bezel. All i can think of doing is repainting it. i was thinking a dark color, but i dunno what its going to do to the effectiveness of the brake lights. Or if anyone can recommend some chrome paint in a can? What y'all think?
How exactly did you get them open? I cracked the plastic when I tried doing mine. 🙁

I do have a new set that I want to paint+seal, but I really don't want to screw it up this time. Any advice would be appreciated!
Wisher23Thread starterBay Area · Dec 10, 2008#3
Well, i used a small knife and a heat gun. I started one edge at a time and worked my way around slowly heating and prying. Took about 20-30 minutes. I was lucky and it didn't crack. I dunno if i want to take the other one apart. What lights do you plan on painting?

Picture not included in this copy
Jamie Tail Lamp. LOL
TinyGiantRochester, NH · Dec 10, 2008#4
i would paint the outside chrome black
KCALB SIRAYVirginia · Dec 10, 2008#5
what color is your liftback?
Wisher23Thread starterBay Area · Dec 10, 2008#6
Oh its the best color ever, Bayou Blue. Haha. I think im going to grab a few colors after work and experiment.
tk-421Dagobah · Dec 10, 2008#8
Originally Posted by Wisher23 ↑
What lights do you plan on painting?
I am planning on painting the same tail lights (the only difference is the plastic that you're holding... Mine is clear with a little tint).

Thanks for the info, BTW. I'll try to be more patient this time around. 😳