Yarisworld Archive

stock crank pulley diameter?

14 posts · 5,103 views

thebarberOriginal postGrand Rapids, MI · Dec 6, 2008#1
anyone know the stock crank pulley diameter? searched but couldnt find an answer...

Replies 13

lilredrocketDFW, Texas · Dec 6, 2008#2
PM NST they should know
cali yarisCanoga Park, CA · Dec 6, 2008#3
I can measure one for you today
thebarberThread starterGrand Rapids, MI · Dec 6, 2008#4
Originally Posted by cali yaris ↑
I can measure one for you today
if you wouldnt mind, thatd be awesome....could you also measure the inside diameter of the hole please...?
NonStopTuningUSA · Dec 6, 2008#5
Originally Posted by thebarber ↑
if you wouldnt mind, thatd be awesome....could you also measure the inside diameter of the hole please...?
Interesting. Are you looking to build a crank pulley? 😉
whooppee777Maryland · Dec 6, 2008#6
Originally Posted by NonStopTuning ↑
Interesting. Are you looking to build a crank pulley? 😉
spoken like a true business man.
thebarberThread starterGrand Rapids, MI · Dec 6, 2008#7
Originally Posted by NonStopTuning ↑
Interesting. Are you looking to build a crank pulley? 😉
lol, actually no

ive bought a used (but NIB) UR Pulley for an echo/xb and i just want to make sure its all the same and/or if its an underdrive pulley (which i think it is)

i imagine itll work, but i thought if someone had their stock one or an NST lightened or underdrive kicking around they could measure, id like to make sure (not like itll be going on my car before april or may anyways...)
1NZYaris1New Zealand · Dec 6, 2008#8
Originally Posted by thebarber ↑
lol, actually no

ive bought a used (but NIB) UR Pulley for an echo/xb and i just want to make sure its all the same and/or if its an underdrive pulley (which i think it is)

i imagine itll work, but i thought if someone had their stock one or an NST lightened or underdrive kicking around they could measure, id like to make sure (not like itll be going on my car before april or may anyways...)
The stock crank pullie has a 13mm bolt hole and the recess for the shaft is
25.5mm in dia X 4.5mm deep .Hope this helps

Opps The outside dia of pullie V's is 156.6 mm approx
the total outside dia is 162.mm (back edge-lip) & 164.mm (front edge-lip).

1 attachment not included in this copy

CASTREXCosta Rica · Dec 6, 2008#9
Originally Posted by thebarber ↑
lol, actually no

ive bought a used (but NIB) UR Pulley for an echo/xb and i just want to make sure its all the same and/or if its an underdrive pulley (which i think it is)

i imagine itll work, but i thought if someone had their stock one or an NST lightened or underdrive kicking around they could measure, id like to make sure (not like itll be going on my car before april or may anyways...)
echo/xb pulley won't work on a Yaris.

Is a different design. The excho/ xb is a double belt design isn't it?
thebarberThread starterGrand Rapids, MI · Dec 6, 2008#10
xb pulley
Picture not included in this copy
thebarberThread starterGrand Rapids, MI · Dec 6, 2008#11
a HA

xb again:

Picture not included in this copy

i imagine the yaris doesnt look like that in profile?
1NZYaris1New Zealand · Dec 6, 2008#12
Yaris pullie is a single belt, not a double.👍
cali yarisCanoga Park, CA · Dec 6, 2008#13
+1
NonStopTuningUSA · Dec 6, 2008#14
Originally Posted by thebarber ↑
lol, actually no

ive bought a used (but NIB) UR Pulley for an echo/xb and i just want to make sure its all the same and/or if its an underdrive pulley (which i think it is)

i imagine itll work, but i thought if someone had their stock one or an NST lightened or underdrive kicking around they could measure, id like to make sure (not like itll be going on my car before april or may anyways...)

The Echo and Scion xB (1st gen) shared the same crank pulley. This is a twin-row crank pulley and will not fit the Yaris.

The Yaris has a single-row crank pulley.

Your best bet would be to order a crank pulley specifically designed for your application.

Good luck and have fun with all your projects!