Yarisworld Archive

Simota Carbon Charger Cold Air Intake

19 posts · 29,125 views

lilredrocketOriginal postDFW, Texas · Dec 6, 2008#1
So I got my intake on thursday and put it that night after work. I was thinking about putting on this weekend but was to excited to wait. I am very happy with and the service that I got from kargoboy was amazing. delivery was faster than expected. 🎉 The install was really easy on a scale from 1-10 with 1 easy it was probably a 2 cause you have to force the pick up tube by your head light may sound bad but really was not. So here is the process couldn't find one on this and if there is here is a newer one pictures and all. Enjoy sorry they are a little out of order.

This is what it looks like before it is touched there are two hose clamps that need to be removed on the tube going from the throttle body to the air box. There is a hose on the back side of this tube with a little clampthat you can pinch with your fingers move it up the line cause you will reuse it pull the hose off. Disconnect the Mass Air Flow sensor harness there are a couple of little clips holding it to the stock system you can brake those off if you like or fight them like I did. Unclip the top of the air box now you can pull it off with the intake hose with it now you can swich the the MAF over to the new intake tube make sure it is facing the right way.
Attachment 14057

This is everthing that comes with the kit.
Picture not included in this copy

This is what it looks like assembled w/o clamps
Picture not included in this copy

After the top of the air box is off and the MAF is swiched over. Remove the air filter and there are 2 bolts in the bottem those need to be removed to take out the bottem of the air box. They are 10mm bolt heads.
Picture not included in this copy

This is with the stock air box removed and the bracket under it too (sorry no pic of the bracket i was still really excited). The bolts holding the bracket have a 12mm head. One of the bolts will reused for the bracket in the kit. I used the hole in the front.
Picture not included in this copy

This is the whole air box put back together with the the bracket no the bottem for storage. Big difference in size and weight.
Picture not included in this copy

This is everthing installed sorry no pictures half way through got carried away again. Install the MAF tube with the adaptor for the throttle body clamp it. then slide the tube with the little clamp still on it and reclamp it. To install the filter leave the main pick up tube clamped on it with the elbow because force is needed to slide the pick up tube between the wires under the head light. now find a way to install the last rubber adaptor and the mounting bracket. It shows how I did my bracket. Just a suggestion.
Picture not included in this copy

I took off my bumper to show what the pick up tube looks like behind the bumper. This is not a nessecary step I just wanted to see it and get a picture
Picture not included in this copy

Over all driving the car I am very happy with it. I drive around with a grin on my face. At WOT I tell everyone that my car sounds pissed off. Just sounds really cool which is why the strictly fuel economy moders won't like my review cause it sound to cool not to let it make that noise. Haha..

8 attachments not included in this copy

Replies 18

msfire671671 · Dec 6, 2008#2
😳 i want one....how much did yah get for it??
ive searched this on youtube....its a beast!

👍
msfire671671 · Dec 7, 2008#4
wow...only $130...no bad at all! thanks!
LtNoogieWest Hills, CA · Dec 7, 2008#5
Good DYI
msfire671671 · Dec 7, 2008#6
whats the diameter on a sedan? 3"??
bxrichN.Y. · Dec 7, 2008#7
Originally Posted by msfire671 ↑
whats the diameter on a sedan? 3"??
msfire671 it fits the sedan. i have with a little costum work.👍

1 attachment not included in this copy

bxrichN.Y. · Dec 7, 2008#8
good diy now go and clean your bay to show it off right.👏
lilredrocketThread starterDFW, Texas · Dec 7, 2008#9
Haha... Thank you... I went to the car wash already. It looks good now. Like they said this whole kit can fit the sedan with a little custom work but can also be used as a ram air too.
Klink10910 · Dec 7, 2008#10
Mine has been in for awhile.......love it. Had to fab a couple of additional brackets to make it a cleaner appearing install and make it easier maint. wise.

1 attachment not included in this copy

lilredrocketThread starterDFW, Texas · Dec 7, 2008#11
^ looks nice. I looks like you did it ram though.
Klink10910 · Dec 7, 2008#12
I did yes....could not for the life of me get the downpipe to go in the space provided. I'm still playing with routing in my mind but am in no big hurry.
jinxorSydney, Australia · Dec 7, 2008#13
Mods can even transfer this post to the diy section... Good write up mate...
msfire671671 · Dec 7, 2008#14
Originally Posted by bxrich ↑
msfire671 it fits the sedan. i have with a little costum work.👍

looks great...but still didnt answer my question...😕

is the diameter 3" or a 2.75"
im placing an order for one and i just want to make sure that its the right size.

btw....👍
lilredrocketThread starterDFW, Texas · Dec 7, 2008#15
Originally Posted by msfire671 ↑
looks great...but still didnt answer my question...😕

is the diameter 3" or a 2.75"
im placing an order for one and i just want to make sure that its the right size.

btw....👍
PM kargoboy he will know but I'm pertty sure it's 3"
kargoboySt. Augustine, FL · Dec 7, 2008#16
Originally Posted by msfire671 ↑
looks great...but still didnt answer my question...😕

is the diameter 3" or a 2.75"
im placing an order for one and i just want to make sure that its the right size.

btw....👍
I just sent you a PM, but now I am confused after reading this.
You ordered only a replacement filter encased in a carbon-fiber-looking
heat shield. The one you ordered fits a 3" intake tube.
That's not an entire intake, though, it's just a filter.
msfire671671 · Dec 8, 2008#17
thanks for the pm but yes i wanted one but im gonna have to settle with just the filter...and yes i will be saving up for the entire intake.
ddongbaphay · Dec 8, 2008#18
I've said it once, and I'll say it again. My intake is the best.

Picture not included in this copy
kuelsydney · Apr 13, 2009#19
My experience with this intake: The downpipe and bracket was a pain to install...and developed a rattle almost instantly (when stopped). Drove me nuts so I had to get rid of the downpipe and bracket - the intake is sort of like an SRI now. Otherwise I quite like it