1NZYaris1Original postNew Zealand · Dec 5, 2008#1Hi everyone,😁
Looking to get some feed back on the Afe intake, Good or Bad.
Ie; fitting issues , preformance , value for money and or just general thoughts.
Photos would also be good.
The reason for all of this is to help me and hopefully others in deciding on a possable purchase.
Also can anyone confirm that these actually seal to the bonnet .
Cheers .👍
Replies 51
ddongbaphay · Dec 5, 2008#2Search bro.
1NZYaris1Thread starterNew Zealand · Dec 5, 2008#3HMMMMM Didn't see that comming.🤣
ddongbaphay · Dec 5, 2008#4 Originally Posted by
1NZYaris1 ↑ HMMMMM Didn't see that comming.🤣
I did. From nearly a mile away.
PETERPOOPOahu · Dec 5, 2008#5check out the micro image sponsor's area. garm is selling the afe intake. i put video and pics of it. check it out
1NZYaris1Thread starterNew Zealand · Dec 5, 2008#6I Have , umm just did not want to thread jack Garms forum 👍.
does your intake box seal to bonnet.🤷
TreyzLong Island, NY · Dec 5, 2008#7Easy to install, and bolts right up. Increase in MPG by a few MPG.
My short summary.
it is nice i have it... it makes a nice sound and feel alittle performance.... alittle
1NZYaris1Thread starterNew Zealand · Dec 7, 2008#9So far so good ,is there anyone that doesn't like it.👍
LtNoogieWest Hills, CA · Dec 7, 2008#10I'll be installing mine next Friday but the fitment may be different because it will connect to my Blitz intake manifold. I'll post my thoughts on it.
1NZYaris1Thread starterNew Zealand · Dec 7, 2008#11And photo's please.🤤i would love a blitz but the $$$$😳
m911gtChicago · Dec 7, 2008#12Before ordering mine, I talked with a few members on the very same subject. I should be able to install it this week so if you haven't ordered one by then, I'll give you my opinion. I was unable to find anyone who did not like the intake.
cali yarisCanoga Park, CA · Dec 7, 2008#13 I was unable to find anyone who did not like the intake.
Just repeating for emphasis, LOL
1NZYaris1Thread starterNew Zealand · Dec 7, 2008#14 Originally Posted by
cali yaris ↑ Just repeating for emphasis, LOL
Okay Garm you win,
I wil take one ,but you need to deliver it PERSONALLY!!!!!🙄 😆 😆
PHXDEMONPhoenix, AZ · Dec 7, 2008#15I have the AFE. Worth every penny. Good quality/easy instructions and install/slight hp boost when the engine really revs/ also has a really nice throaty tone when it revs above 3500 RPM.
PHXDEMONPhoenix, AZ · Dec 7, 2008#16Sorry no pics. I had them in my garage pre hack.
1NZYaris1Thread starterNew Zealand · Dec 19, 2008#17Any more up dates, Photo's,🙌
LtNoogieWest Hills, CA · Dec 19, 2008#18I have an interesting observation. I have a ScanGauge II and sometimes set it to display the intake air temperature.
When I'm driving, the intake air temperature is a few degrees higher than the outside temp. When I stop at a light, the ScanGauge shows the intake air temp rising.
Last night when I got home, the air temp was around 45 degrees. Intake air was measuring 48 degree. When I pulled into the driveway, I just sat there and idled while watching the intake air temp rise to 90 degrees before I got tired and went inside.
I don't remember this happening when I had a TRD CAI that was sucking air from behind the headlight.
I'm wondering if people with SRI's see the same thing with their ScanGauges.
1NZYaris1Thread starterNew Zealand · Dec 20, 2008#19send me your scanguage and i will test that out😆 just want to see if i could
get a free scanguage😈
sorry
but you are right this sounds very interesting , anyone esle with a scangauge that could put more
light on this subject, positive or negative is good 🙌
LtNoogieWest Hills, CA · Dec 20, 2008#20Here's a repost of my photo.
Picture not included in this copy
1NZYaris1Thread starterNew Zealand · Dec 20, 2008#21Cool 🙇🙇 can you send the blitz 🤤to me when you send your scanguage . i should have my AFE intake in about 4 weeks .
Just need to find a little bit more money first.
Anyone want to buy my wife , low mileage , 1 careful owner 😆😆
LtNoogieWest Hills, CA · Dec 20, 2008#22Send photo...🙄
1NZYaris1Thread starterNew Zealand · Dec 20, 2008#23Here you go 👍
2 attachments not included in this copy
LtNoogieWest Hills, CA · Dec 20, 2008#24👍...Ok, I'm unbolting my Blitz tomorrow morning.
ivanmadelineNC · Dec 21, 2008#25Just instal mine yesterday. It was so easy and it sounds great.👍
YamilRSan Diego, CA · Dec 21, 2008#26 Originally Posted by
1NZYaris1 ↑ Here you go 👍
used and abused, just how I like them, to bad I don't have a super charger
falkor_99OC · Dec 22, 2008#27after reading a couple of other threads and seeing the pics, i plan on getting an aFe intake when i get the money. I had the AEM cold air and that was great, but since i cut into my wheel for my wheels water was getting in there so I had to take it off. And the aFe seems to be the best replacement.
NJBobSouth Jersey · Dec 24, 2008#28Hmmmmmmm Izzat a Stage 1 or 2? Picture not included in this copy
cali yarisCanoga Park, CA · Dec 24, 2008#29The aFe is a Stage II, but if you're referring the photos that were posted, I'm not sure. 😁
1NZYaris1Thread starterNew Zealand · Dec 24, 2008#30 Originally Posted by
NJBob ↑ Hmmmmmmm Izzat a Stage 1 or 2? Picture not included in this copy
😆 It's what ever stage you want it to be 👍
1NZYaris1Thread starterNew Zealand · Dec 29, 2008#31Just sealed the bonnet in prep for my AFE intake, 🙄 HINT ,HINT, Garm 😆😆
3 attachments not included in this copy
cali yarisCanoga Park, CA · Dec 29, 2008#32love those side mirrors!!
1NZYaris1Thread starterNew Zealand · Dec 29, 2008#33Yeah they where hard work , not as nice as the ones you sell though😁
Cheap plug 😲
But really if i had to do it again i would buy yours👍
LtNoogieWest Hills, CA · Dec 29, 2008#34What's that big black thing in front of the battery?
After taking my car to the automatic car wash yesterday, I noticed that the aFe filter was wet. I guess the the car wash sprayed water through the grill and onto the filter. I'll have to block that the next time I take it in for a wash.
1NZYaris1Thread starterNew Zealand · Dec 29, 2008#35 Originally Posted by
LtNoogie ↑ What's that big black thing in front of the battery?
After taking my car to the automatic car wash yesterday, I noticed that the aFe filter was wet. I guess the the car wash sprayed water through the grill and onto the filter. I'll have to block that the next time I take it in for a wash.
Have you sealed your bonnet,and that blackbox will be gone in a couple of weeks , thanks to Garm, and his unsightly shop 😁
YarisSedanCalifornia - Bay Area · Dec 29, 2008#36 Originally Posted by
1NZYaris1 ↑ Just sealed the bonnet in prep for my AFE intake, 🙄 HINT ,HINT, Garm 😆😆
Is that a ebay strut bar with a trd sticker on it 😁
1NZYaris1Thread starterNew Zealand · Dec 29, 2008#37😁 Well spotted , 😆 ,toying with taking it off and painting the bar,
the same color as the car.
1NZYaris1Thread starterNew Zealand · Jan 6, 2009#38AFE intake 🤤 arrived this afternoon , and know installed, and i love it
Thank you Garm .🙇 and everyone else for there input.
4 attachments not included in this copy
nvidiaxtcHayward, CA · Jan 12, 2009#39I want to get that intake but I'm worried about it getting wet and messing up the engine
1NZYaris1Thread starterNew Zealand · Jan 12, 2009#40If you put a rubber seal on the car as per photo's or something similar
you will have no water problems at all , and the only thing the AFE intake does to the 👏👏
car is make it way better , and sounds pretty cool under hard excelleration.
🙄 there goes my fuel economy 😆
LtNoogieWest Hills, CA · Jan 12, 2009#41Where did you get the moulding material to seal your bonnet? I am still getting water on my aFe filter when the car goes through the automatic car wash. She even threw a CEL about the MAF. I cleared it with the ScanGauge and the CEL did not come back. I will probably only seal the area near the intake.
cali yarisCanoga Park, CA · Jan 12, 2009#42you use the automatic car wash? I can't do that any more -- too low.
Originally Posted by
LtNoogie ↑ Where did you get the moulding material to seal your bonnet? I am still getting water on my aFe filter when the car goes through the automatic car wash. She even threw a CEL about the MAF. I cleared it with the ScanGauge and the CEL did not come back. I will probably only seal the area near the intake.
you could always make a lid for those rainy days or the carwash.
1 attachment not included in this copy
nvidiaxtcHayward, CA · Jan 12, 2009#44 Originally Posted by
1NZYaris1 ↑ If you put a rubber seal on the car as per photo's or something similar
you will have no water problems at all , and the only thing the AFE intake does to the 👏👏
car is make it way better , and sounds pretty cool under hard excelleration.
🙄 there goes my fuel economy 😆
🆘 How did you do that? That's awesome
nvidiaxtcHayward, CA · Jan 12, 2009#45 Originally Posted by
kou ↑ you could always make a lid for those rainy days or the carwash.
How did you do that?
1NZYaris1Thread starterNew Zealand · Jan 12, 2009#46 Originally Posted by
nvidiaxtc ↑ 🆘 How did you do that? That's awesome
The rubber seal is made by a local company in NZ and is shipped through out the world it cost's $14.00NZ per metre ($8.55US)you require 2 metre's for the job.
It has an adheasive backing similar too 3m and sticks like shit to a blanket,
providing the area is clean.
there are other options out there as well as seen on here in Yaris world ,
but if anyone wants this product i am more than happy to send it to you , but would be best if 3 or 4 people local to each other bought it as then only one package would need to be sent
Postage if anyone was interested would start at $9.00US for 2mtr's
$15.00US 4MTR's
$20.00US 6MTR's
$24.00US 8MTR'S
Hope this helps you all .
PHXDEMONPhoenix, AZ · Jan 12, 2009#47To all the people worried about the filter getting wet. I have had the AFE for a while and driven my car down the freeway in pouring rain with out sealing my hood. Popped the hood and not a drop of water on the filter. The auto car wash probably sprays hard enough that water sneaks under the cracks in the hood.
ClodeItaly · Jan 27, 2009#48hi
the AFE intake is compatible with Yaris 1.8 TS??
thanks
CASTREXCosta Rica · Jan 27, 2009#49 Originally Posted by
Clode ↑ hi
the AFE intake is compatible with Yaris 1.8 TS??
thanks
Is not compatible, as the pipe diameter and the MAF housing are different.
However, there is a possible option from AFE that would work on the 1.8.
We will be testing one in a couple of weeks to verify it fit correctly.
There is some info about it on the TS subforum
ClodeItaly · Jan 27, 2009#50 Originally Posted by
CASTREX ↑ Is not compatible, as the pipe diameter and the MAF housing are different.
However, there is a possible option from AFE that would work on the 1.8.
We will be testing one in a couple of weeks to verify it fit correctly.
There is some info about it on the TS subforum
ok...
many thanks