Yarisworld Archive

I need help w/ wheel spacers...Open Mic lol

22 posts · 8,247 views

Stargate YARlantISOriginal postSaint Petersburg, FL · Dec 3, 2008#1
So...I've been thinking about this for a minute and decided to ask YW members their experience w/ wheel spacers.... I want to get some just don't know about sizing... if you can look on ebay and let me know your opinions, I'd really appreciate it.

http://cgi.ebay.com/ebaymotors/10mm-...2483QQtcZphoto

Replies 21

Black YarisToledo, OH · Dec 3, 2008#2
what offset/width wheel do you plan on running?
Is you car lowered?

I am running a 7 in wide +43 offset wheel with 25mm adapters all the way around, and 10mm hub spacers in the rear
Stargate YARlantISThread starterSaint Petersburg, FL · Dec 3, 2008#3
i have ICW 15" RBI's gunmetal 15x7 4x100

not lowered yet, but will be, i have my megan springs, just haven't had the time to install them yet...
Black YarisToledo, OH · Dec 3, 2008#4
ok........ what is the offset of the wheels, that is the most important part when looking at wheel spacers
Stargate YARlantISThread starterSaint Petersburg, FL · Dec 3, 2008#5
Picture not included in this copy
Stargate YARlantISThread starterSaint Petersburg, FL · Dec 3, 2008#6
I think its +40
Black YarisToledo, OH · Dec 3, 2008#7
not to be a dick, but that still does not tell me the offset
Picture not included in this copy
Black YarisToledo, OH · Dec 3, 2008#8
you really need to know the exact offset before looking in to spacers/adapters
Black YarisToledo, OH · Dec 3, 2008#9
Originally Posted by Stargate YARlantIS ↑
I think its +40
if you are running a +40 offset, you do not want any type of spacer/adapter for the front, it will rub like crazy of you do

on the rear you do not want to run more than a 10-13mm (3/8-1/2 inch)

also need to know what size tire you are running.... smaller tire give you more room to play with
Stargate YARlantISThread starterSaint Petersburg, FL · Dec 3, 2008#10
stock rubber from my steelies 185/65/15
Black YarisToledo, OH · Dec 3, 2008#11
stock rubber should have been 185/60R15

so you MIGHT be able to run 10mm spacers in the front and 20mm in the rear

you will need extended wheel studs to do so
kimonaHuntington Bch, CA · Dec 3, 2008#13
I would recommend only hubcentric wheel spacers... Ichiba is a good name, but there are certainly others.
Stargate YARlantISThread starterSaint Petersburg, FL · Dec 3, 2008#14
Thanks for all the info everyone....Mods can lock this if they want...
anonymous userwindward oahu · Dec 6, 2008#15
If you don't need extended lugs, then any cheap hubcentric spacer would work.
IMO, they don't have to be name brand. And BTW, those ebay ones are quite expensive. You can get them for 5-8 bucks depending on the size you need.
Good luck, and let us know.
Black YarisToledo, OH · Dec 6, 2008#16
well if you go as little as 1/4 inch (~6mm) you will need extended wheel studs.... we have very short OE studs
tk-421Dagobah · Dec 6, 2008#17
What if you have 15x6.5 with +38 offset? I really want to add spacers to the rear wheels.
I don't know if this helps or not, but my center bore is 73.1
Black YarisToledo, OH · Dec 6, 2008#18
Originally Posted by tk-421 ↑
What if you have 15x6.5 with +38 offset? I really want to add spacers to the rear wheels.
I don't know if this helps or not, but my center bore is 73.1
you can run 10mm spacers no problem, or possibly 15mm spacers in the rear since you have a thinner wheels.... also depends upon what size tire
tk-421Dagobah · Dec 6, 2008#19
Originally Posted by Black Yaris ↑
you can run 10mm spacers no problem, or possibly 15mm spacers in the rear since you have a thinner wheels.... also depends upon what size tire
205/50R15
Black YarisToledo, OH · Dec 6, 2008#20
stick with 10mm

hub spacers would be ideal for what you are looking for, instead of wheel spacers
tk-421Dagobah · Dec 6, 2008#21
Originally Posted by Black Yaris ↑
stick with 10mm

hub spacers would be ideal for what you are looking for, instead of wheel spacers
Thanks buddy! 👍
Malaya1221Torrance, Ca · Dec 6, 2008#22
fyi- running 195-55-15 15x7 +25 front +15(+25 and a 10mm spacers)rear tein s-techs springs with oem struts...has minor rubs in front when running on some dips...