Yarisworld Archive

Rear Clear Lights

29 posts · 8,197 views

tomgeorgiaOriginal postNorthern Georgia USA · Dec 2, 2008#1
Yes I searched and read all the threads about these. I wanted to just ask one, simple question: on a scale of 1 - 10, how easy are they to install for someone with intermediate experience with cars?

Replies 28

m911gtChicago · Dec 2, 2008#2
Pretty easy, remove a plastic panel on each side of the trunk, then remove two 10mm bolts from each light assembly, unplug the wiring harness and pop the old ones out. Rinse and repeat backwards with the new ones.

P.S. This was a legit question and I am happy to provide an answer for hopes that it may help other members as well
TinyGiantRochester, NH · Dec 2, 2008#3
tomgeorgia setup a garage ..whats your car look like?
SIPNGASSoutheast Wisconsin · Dec 2, 2008#4
I changed mine...and I would say I have little or NO experience....and it was easy after I got through the first one. =)
PreciousPups4ULexington, SC USA · Dec 2, 2008#5
Very easy. 30 minutes or so. Trickiest part is getting the old ones unplugged. It was a very tight fight on the passenger side, easier on the drivers side.

Sorry not sure whether you mean 1 is easiest or 10 is easiest.
ChinoCharlesOH · Dec 2, 2008#6
After messing with them so many times, I can have my tail lights out in 2 minutes. Literally. It is a piece of cake.

If you're replacing your stock tail lights with the TYC tail lights, which just plug into the stock harness, it is super easy.

If you're using tail lights from other countries, you'll have to do some custom wiring. That was a little bit of a PITA considering the colors on the wires don't match up. I had to use trial and error to get them hooked up right. Drove me nuts.
Stargate YARlantISSaint Petersburg, FL · Dec 2, 2008#7
don't forget to disconnect the neg terminal :)
Benggolf2Richmond, B.C., Canada · Dec 2, 2008#8
This mod is easy to do, no problem. 👍 The ladies in our forum actually "inspired" me to do the mod. 🙂

Picture not included in this copy
IsLNdbOiLas Vegas, NV · Dec 2, 2008#9
Definitely one of the easier "mods" to do. Hardest part was unplugging the stock lights.

Can't wait to do it again once new tail lights are available for the '09 5-door LBs.
SIPNGASSoutheast Wisconsin · Dec 2, 2008#10
I love how it changed the look of the car.
Picture not included in this copy
Meteorite_MartyWaterloo, Ontario, Canada · Dec 2, 2008#11
I also replaced my lights with the clear TYC tails, and I think they look better than anything available for the Yaris. They should have came stock. Add to that, the fact that they are plug-and-play to the existing wiring, and its a no brainer. Each side has 2 nut and bolt pairs to loosen, and off come your old tails with a bit of pulling away from the vehicle. 30 minute job, if that.

To top it off, I recently added a pair of PHILIPS SILVERVISION INDICATOR BULBS DESIGNER PY21W, to get rid of the orange, fried egg look in the housing. I also replaced my front signals with the same bulbs. These bulbs are amazing quality and made in Europe. They are compatible with North American fittings. The bulbs are just as bright as the standard amber signals and do not flash the same dim orange that other, cheaper chrome coated bulbs do.

I also added a pair of PHILIPS P21.5 W 12V /21W SIGNALLING BULBS P21/5 PHILIPS for the stop lamps.

2 attachments not included in this copy

jinxorSydney, Australia · Dec 2, 2008#12
pics of the lights? i have clear lights as well, and was thinking of changing them to something nicer, like led or the silvervisions...
Meteorite_MartyWaterloo, Ontario, Canada · Dec 2, 2008#13
Will snap some pictures of them tomorrow. Its late here and time for bed.
Chris07LBNew Jersey · Dec 7, 2008#14
Anyone have their original lights, they want to unload?

In a real bind, would need asap.
NagolMinneapolis · Dec 7, 2008#15
Here is a photo of mine that I wouldn't mind selling (just took the photo 5 minutes ago). I actually only had these on my car for 3 weeks until I slapped some clears in there. I actually had an offer on these last weeks for $125 locally (wasn't sure if I wanted to let them go yet) but I would sell them for $140 shipped. Let me know if you're interested.

1 attachment not included in this copy

Benggolf2Richmond, B.C., Canada · Dec 7, 2008#16
Originally Posted by Chris07LB ↑
Anyone have their original lights, they want to unload?

In a real bind, would need asap.
Hi Chris,

You have mail. 🙂
1NZYaris1New Zealand · Dec 7, 2008#17
Originally Posted by jinxor ↑
pics of the lights? i have clear lights as well, and was thinking of changing them to something nicer, like led or the silvervisions...

Here you go ,my clear light are running ,LED bulbs (56LED's on each bulb)
Something a little different to everyone else.
All up i think the LED's cost about $65.00US.

2 attachments not included in this copy

dybbukFredericton · Dec 7, 2008#18
Those led's look awesome!
1NZYaris1New Zealand · Dec 7, 2008#19
Thank you, just something completely different to everone else.
jinxorSydney, Australia · Dec 7, 2008#20
hey nz, can you post a pic of those led's in night?
1NZYaris1New Zealand · Dec 7, 2008#21
Will take some photo's tonight,
Photos added
sorry about quality ,photos where taken without flash, with no back lighting.

2 attachments not included in this copy

bienimanSuriname South America · Dec 8, 2008#22
hi guys,
Ive been searching a long time for tail lights for my 2001 vitz rs 1500,
all i'm getting are results for the models 2003 and above.
Can somebody recommend a website for me, i prefer locations in USA, please....

Thanx
jinxorSydney, Australia · Dec 8, 2008#23
hey nz, those night shots are brilliant....
what are the numbers for those leds?
Franck_QcQuébec City, Canada · Dec 8, 2008#24
Originally Posted by Meteorite_Marty ↑
... I recently added a pair of PHILIPS SILVERVISION INDICATOR BULBS DESIGNER PY21W, to get rid of the orange, fried egg look in the housing. I also replaced my front signals with the same bulbs. These bulbs are amazing quality and made in Europe. They are compatible with North American fittings. The bulbs are just as bright as the standard amber signals and do not flash the same dim orange that other, cheaper chrome coated bulbs do.
Where did you bought your PHILIPS SILVERVISION ? I'm interested for my front turn signals 🙂

For others, nice your clear lights, especially with LED as 1NZYaris1 🎉
But I prefer my JDM LED tail lights 😉

😁
1NZYaris1New Zealand · Dec 8, 2008#25
Originally Posted by jinxor ↑
hey nz, those night shots are brilliant....
what are the numbers for those leds?
They are all 56 LED Bulbs, Brake lights are red , indicators are yellow and the reverse are white.
Meteorite_MartyWaterloo, Ontario, Canada · Dec 9, 2008#26
I recommend the LED from www.VLEDS.com. I did my entire interior, parking lights, reverse, and license plate lights with their products. Basically, every non-blinking bulb. LEDs will blink fast without a wiring harness.
Meteorite_MartyWaterloo, Ontario, Canada · Dec 9, 2008#27
Originally Posted by Franck_Qc ↑
Where did you bought your PHILIPS SILVERVISION ? I'm interested for my front turn signals 🙂

For others, nice your clear lights, especially with LED as 1NZYaris1 🎉
But I prefer my JDM LED tail lights 😉

😁
I replaced all of my incandescent exterior lights with Philips products, including my headlights. I bought them on eBay from a seller called clivec296 and his store is at:

http://stores.ebay.ca/headlightbulbs

Way cheaper prices, amazing service, and fast delivery from the UK. The bulbs got to my house in Canada in 3 days; even quicker than US Post!

I suggest you cross reference the North American bulbs with the Euro equivilants, by using a site such as http://www.donsbulbs.com/cgi-bin/r/t.pl

For example, I used Philips Xtreme Power H4 for my car, as they are compatible with North American standards.
1NZYaris1New Zealand · Dec 10, 2008#28
Originally Posted by Meteorite_Marty ↑
I recommend the LED from www.VLEDS.com. I did my entire interior, parking lights, reverse, and license plate lights with their products. Basically, every non-blinking bulb. LEDs will blink fast without a wiring harness.
That is thru , i used 2 x 10 watt resisters.
Franck_QcQuébec City, Canada · Dec 10, 2008#29
Originally Posted by Meteorite_Marty ↑
I replaced all of my incandescent exterior lights with Philips products, including my headlights. I bought them on eBay from a seller called clivec296 and his store is at:

http://stores.ebay.ca/headlightbulbs

Way cheaper prices, amazing service, and fast delivery from the UK. The bulbs got to my house in Canada in 3 days; even quicker than US Post!

I suggest you cross reference the North American bulbs with the Euro equivilants, by using a site such as http://www.donsbulbs.com/cgi-bin/r/t.pl

For example, I used Philips Xtreme Power H4 for my car, as they are compatible with North American standards.
Thank ! 👍