Yarisworld Archive

Official HID show off

20 posts · 6,996 views

IllusionXOriginal postBrossard, QC · Dec 1, 2008#1
I remember there was this thread about the glare of HID in a reflector headlight housing. Well, i finally had time, and it was actually dark enough to take good pictures of my headlights...

the kit... i'm using 1 volvo ballast and 1 maxima ballast lol. The bulbs are BMW bi-xenon bulbs modified to fit in a H4-2 solenoid. Anyways.... 4300k power.

3 attachments not included in this copy

Replies 19

Kaotic LazagnaCentral Valley, CA · Dec 2, 2008#2
LOOKS WAAAAY BETTER THAN MY CUTOFF. 👍
PHXDEMONPhoenix, AZ · Dec 2, 2008#3
HID crew 👍 what temp? mine are 6000k but those look to be a little bit more blue than mine.
IllusionXThread starterBrossard, QC · Dec 2, 2008#4
4300k the same bulbs found in a BMW 330i or X5.
Kaotic LazagnaCentral Valley, CA · Dec 2, 2008#5
I want some 5500k bulbs. My 6000k's are a little too blue for me.
SplitEdmonton · Dec 3, 2008#6
Originally Posted by PHXDEMON ↑
HID crew 👍 what temp? mine are 6000k but those look to be a little bit more blue than mine.
its all about the camera, its lens, and settings etc.
We have 5000k in the yaris and i'd probably recommend 4500k. I'll get pics when i can.
ViolinNew Jersey · Dec 6, 2008#7
With retrofitted RX-330 projectors and clear lens swap.

1 attachment not included in this copy

ChinoCharlesOH · Dec 6, 2008#8
I suck. I've still got my retrofit sitting in my closet.
ViolinNew Jersey · Dec 6, 2008#9
You do suck.
taKutoToronto · Dec 6, 2008#10
i've had my retrofit stuff sitting in my basement for 2 years, but at least i put them in a few months ago :P
IllusionXThread starterBrossard, QC · Dec 7, 2008#11
i have some bimmer auto adjusting projectors somewhere... gonna fit them in this summer...
computerlove87jOakland · Dec 15, 2008#12
Originally Posted by IllusionX ↑
i have some bimmer auto adjusting projectors somewhere... gonna fit them in this summer...
OMG, I really want the auto-leveling, adaptive HIDs off a bimmer, but wouldn't that take a LOT of electronics know-how to put them in and actually get them working like a bimmer (turning headlights around corners, auto-leveling, etc.)

If there is a way to do that, PLEAAASSSEEEE post pics and instructions and video. if you get auto leveling, adaptive lights working on yaris, I 🙇 you!!!!!
IllusionXThread starterBrossard, QC · Dec 15, 2008#13
well, the feature is there... but i don't have anything else.. so, i doubt it'll get everything working as it's supposed to.
taKutoToronto · Dec 16, 2008#14
i don't think you'll get too far with auto-levelling without significant work. The auto levelling feature relies on a bunch of sensors and the ECU to do its job for cars that come with it, and having only the parts from the headlights is not enough.

i'm guessing you just have the headlights so you'll just have the motors which are not much use unless they can be manually adjusted like the FX projector motors. But with that, making a mounting mechanism to allow it to pivot and adjust will take some time and thought.
phu@xenon-visionEL MONTE, CA · Dec 19, 2008#15
Here are a few pictures from our customer from YARISWORLD

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
slvryarisIndiana · Dec 20, 2008#16
Wow Violin very nice as I remember. Lets not get into the subject of glare and cut off and if you need a harness with relays :). I know I had some HID's and I was blinding people. Felt so bad I ripped them out.
ViolinNew Jersey · Dec 20, 2008#17
I had a DIY posted before the hack. I'll have to put something together.

I made a harness (actually two so if one fails, I still have the other side) that lets me flash the highs without the HIDs (lows) coming on. The lows stay on when I turn on the high beams so my ballasts aren't cycling on and off.
IllusionXThread starterBrossard, QC · Dec 20, 2008#18
oh, did i mention that my HIDs are bi-xenons? got this actuator that changes the position of the bulb for high beam.
IllusionXThread starterBrossard, QC · Mar 5, 2015#19
Just holy thread revival. My HIDs are still working after all these years :)
scod4025Sacramento · Mar 5, 2015#20
Hmm so now I have something else that must be added to my to do list