CB900F2Original postToronto · Nov 30, 2008#1Anyone know the I.D and O.D of the transmision fluid drain bolt washer?
thanks guys!
Replies 14
WolfWingsKansas City, MO, USA · Nov 30, 2008#2Just stop by any Toyota dealership, ask them for the washer at the parts counter. They'll look it up, and (literally) have a bag of them in a drawer. The bag of a thousand costs like $10, they'll just hand ya' one and send ya' on your way generally.
TamagoOff Grid · Dec 1, 2008#312mm
hatchbackkid82. · Dec 1, 2008#4Anyone know what size the transmission drain bolt is ?
WolfWingsKansas City, MO, USA · Dec 1, 2008#5 Originally Posted by
hatchbackkid82 ↑ Anyone know what size the transmission drain bolt is ?
You re-use the existing drain bolt each time.
Again, go to any dealership, ask for the washer, re-use the drain bolt, even the service manual says that. :-)
hatchbackkid82. · Dec 2, 2008#6I know i was just trying to find out what size socket i would need. I tried everyone and none fit they were too small
CB900F2Thread starterToronto · Dec 3, 2008#7Found out the size... I.D 18mm
WolfWingsKansas City, MO, USA · Dec 3, 2008#8 Originally Posted by
hatchbackkid82 ↑ I know i was just trying to find out what size socket i would need. I tried everyone and none fit they were too small
Ah, THAT I can understand. Had the same issue here, on my model (2007 3dr Manual) the drain bolt is a whopping 24mm head. Had to buy the metric impact-socket set to find one that went up that far.
hatchbackkid82. · Dec 5, 2008#9Thanks i was going nuts....
TamagoOff Grid · Dec 5, 2008#10 Originally Posted by
WolfWings ↑ Ah, THAT I can understand. Had the same issue here, on my model (2007 3dr Manual) the drain bolt is a whopping 24mm head. Had to buy the metric impact-socket set to find one that went up that far.
you could just use a 15/16" lol
WolfWingsKansas City, MO, USA · Dec 5, 2008#11Same problem there, couldn't find any socket-sets that went up that far without being 100+ piece sets, which I patently didn't need and don't have any interest in storing.
That, and the impact-socket set was half the price of said 100+ piece sets, and had a 'combo sale' with a good 1/2" drive torque-wrench bar they were compatable with. So... $30 + $40, versus $15 + $20 = impact-socket set wins. :-)
auxmikeLI, New Yawk · Dec 5, 2008#12Sears sells individual sockets ala carte. I once needed a 5.5mm socket to drop a Saturn steering column and they had it!🤘
Cool avatar, wolf!👏
TamagoOff Grid · Dec 6, 2008#13Picture lost · www.toolreviewguide.com ?
WolfWingsKansas City, MO, USA · Dec 6, 2008#14 Originally Posted by
Tamago ↑ Picture lost · www.toolreviewguide.com ?
On something like a quarter-panel bolt? Sure.
On the bolt holding my transmission fluid in/letting me refill it? Hell no.
If you're wrenching on something mostly cosmetic and not mission-critical, rounded bolts are a non-issue. The uber-critical stuff though, I go for the right tools for the job. :-)
TamagoOff Grid · Dec 7, 2008#15proper application of the wrong tool generally works out just fine..
but yeah 15/16 open ended wrench would do the job.. there are many nut/bolt sizes that can use either/or metric/standard