Yarisworld Archive

Wheel fitment question

17 posts · 6,384 views

helladriftOriginal postbay area, ca · Nov 30, 2008#1
Hello, I am a fan of yaris and in the market to get one. but i was curious to know the widest wheel and lowest offset that i could use on a liftbacks? my preference is flushness rather than performance. and yes, the car would be one some type of coilovers.. so any ideas or pics?? 🙂

Replies 16

cali yarisCanoga Park, CA · Nov 30, 2008#2
there are members doing 17 x 7 without issues. I believe they run up to 205 width tires.

if you have too much positive offset on the wheel, you can always use 10mm or 15mm spacers to flush it out. Note that on the Yaris, the rear wheels appear to tuck more than the fronts with the same wheels.
helladriftThread starterbay area, ca · Nov 30, 2008#3
sweet. thanks for the tip, but still would like to run something a bit wider if possible. does anyone run like 8 width with close to, say ~0 offset? anyone know if there are hub adapters to run 4x114.3 also?
PetersRedYarisThe Black Hills of South Dakota · Nov 30, 2008#4
My 17x7 38+ offsets were quite flush in the front. You could add a 10mm spacer in the back to even them out.
Kaotic LazagnaCentral Valley, CA · Dec 1, 2008#5
Contact 03Z33 or Walter on here. They have ran very flushed wheels/tires on their LB's.
nerd_vitZSan Diego · Dec 1, 2008#6
i think +25 front +20 rear is what jeff is running.
helladriftThread starterbay area, ca · Dec 1, 2008#7
who is jeff..? he's using +25 on an 8?
WeeYariGeorgetown, Ontario, Canada · Dec 1, 2008#8
Jeff is 03Z33

This is what he shows in his garage:

AME Shallen LX Diamond Cut 16x8 +25LO front 16x8 +18SLO rear with 195/45/16 Federal tires

With 195 rubber, he is really stretched!
helladriftThread starterbay area, ca · Dec 1, 2008#9
yeaaa ame makes sweet wheels. i like the vip look. i had some wheels that i had off my other car that i wanted to put on the yaris but wrong lug pattern =X they were about the sames sizes as his too. does anyone have any rubbing problems at all. ?
bzinn 1University Place,WA · Dec 1, 2008#10
I have 17x8 with +35 on mine and 205/45/17 tires and it is kinda stretched and rubs on bumps with the DF210s.I have learned to ignore it and drive slow on speed bumps.I wider tire would be torn up in days on my setup,as would my fenders.
kimonaHuntington Bch, CA · Dec 1, 2008#11
The Vitz doesn't accommodate anything too radical very well... and remain a good daily driver.

Here's 17x7's and 205/40's on Tien modified suspension. FR, ET42//RR, ET35

It's a nice clean fitment with no worries.

1 attachment not included in this copy

helladriftThread starterbay area, ca · Dec 1, 2008#12
for the ppl that are rubbing, did you guys roll your fenders and still having rubbing issues? i think i'd still like to get wheels a bit wider...
kimonaHuntington Bch, CA · Dec 1, 2008#13
Curious: What is the point in wider wheels when you're basically limited to 205 rubber?
thebarberGrand Rapids, MI · Dec 1, 2008#14
Originally Posted by kimona ↑
Curious: What is the point in wider wheels when you're basically limited to 205 rubber?
agreed. i dont get it.

crandall runs tenzoR rims that are 17x7 with a 35 offset and 215 tires

he's slammed on tein basics but rubs on bumps or hard corners...

i really dont think an 8" wide rim is a great idea on a yaris....esp w/ a 0 offset.....it looks like poop and does nothing for driveability
helladriftThread starterbay area, ca · Dec 1, 2008#15
again, i'm not interested in driveability. i have a car that i track, so i'm just there for look.

and i never said i'm looking to run wider rubber. i'm looking for a better STRETCH.

195/45 is cool for an 8. and i look for lower offset on wheels because i like concave wheels or wheels with lip.

is that a problem?
kimonaHuntington Bch, CA · Dec 1, 2008#16
Originally Posted by helladrift ↑
again, i'm not interested in driveability. i have a car that i track, so i'm just there for look.

and i never said i'm looking to run wider rubber. i'm looking for a better STRETCH.

195/45 is cool for an 8. and i look for lower offset on wheels because i like concave wheels or wheels with lip.

is that a problem?
Not a problem, mate. Just some observations from well intentioned yarisworld members... attempting to understand where you want to go with your fitment queries.
helladriftThread starterbay area, ca · Dec 2, 2008#17
well thanks for replying and stuff. i think jeff answered most of the questions. thanks.