songaOriginal postMA, USA · Nov 26, 2008#1i have a new 2009 yaris sedan, with the 15" steel wheel with wheel covers.
i just found the Motegi SX5 rims in silver, 15x6.5 i believe. the recomended tire size is 185/60/15. here is a link from tirerack:
http://www.tirerack.com/wheels/Wheel...All&sort=Brand will those fit my stock yaris tires that i have on right now? so i can just order the rims only, without tires, and have them installed somehwere using my existing tires?
also, with those rims installed, it shouldnt affect my odometer/speedometer readings at all since its the same size as the OEM steel wheels and tires, righT? so itll only affect those meters if i have bigger or smaller wheels installed?
thanks again u guys have been a huge help so far
Replies 11
CASTREXCosta Rica · Nov 26, 2008#2Yes....
Your Stock wheels will fit into a 6.5" wheel with no problem.
A lot of people here have done it.
A little advise... the offset on that wheel is a little low for the Yaris. That one on your link is a +35
You could have some rubbing.
It should be ok as long if you don't plan on lowering the car on the future. Or you don't usually carry 3 grown ups in the back of your car.
For an un-lowered car the ideal offset should be 40+ or higher.
For a lowered car you should look for 42-45+ offset🎉
songaThread starterMA, USA · Nov 26, 2008#3 Originally Posted by
CASTREX ↑ Yes....
Your Stock wheels will fit into a 6.5" wheel with no problem.
A lot of people here have done it.
A little advise... the offset on that wheel is a little low for the Yaris. That one on your link is a +35
You could have some rubbing.
It should be ok as long if you don't plan on lowering the car on the future. Or you don't usually carry 3 grown ups in the back of your car.
For an un-lowered car the ideal offset should be 40+ or higher.
For a lowered car you should look for 42-45+ offset🎉
interesting...thanks. what exactly does the offset values represent, and what is rubbing? 🤷
CASTREXCosta Rica · Nov 26, 2008#4 Originally Posted by
songa ↑ interesting...thanks. what exactly does the offset values represent, and what is rubbing? 🤷
Basically the offset measures how much the wheel sticks out or tucks in the fender of the car.
Go to The Tirerack.com. They have a lot of technical information regarding this subject.
Now a Yaris with an offset of 35+ like the wheels on your link will rub the outer side of the tire on the fender of the car. In other words, the tire will stick out a little too much.
This will happen over a bump or when carrying heavy load.
You want enough offset so your wheel can move freely inside the fender of the car when the suspension is compressed.
songaThread starterMA, USA · Nov 26, 2008#5ahh isee...so the smaller the offset value, the more the wheel will be sticking out? this makes sense if its lowered as you said, since you would want a larger offset value to have the wheel tucked ina bit more and away from the fender, correct?
ok..so i should be looking for a wheel with offset of 40 or more? how about these:
http://www.tirerack.com/wheels/Wheel...All&sort=Brand so far, these seem to have all the matching specs....
also, how much do the 15" stock wheels weigh? i want to see if these 17lbers are lighter...
CASTREX: thanks again for all your help!!
kimonaHuntington Bch, CA · Nov 26, 2008#615x6.5, ET35, 185/60/15, is good fitment for the Yaris. With the +35 offset and the 185mm tyre, you will have no rubbing issues whatsoever! If you plan to run OEM 185's, any wheel with ET35-45 will be fine. No worries.
Perhaps you can checkout this website as well: discounttiredirect.com
Lots of wheels $100 or less, plus free shipping.
CASTREXCosta Rica · Nov 26, 2008#7 Originally Posted by
kimona ↑ 15x6.5, ET35, 185/60/15, is good fitment for the Yaris. With the +35 offset and the 185mm tyre, you will have no rubbing issues whatsoever! If you plan to run OEM 185's, any wheel with ET35-45 will be fine. No worries.
Perhaps you can checkout this website as well: discounttiredirect.com
Lots of wheels $100 or less, plus free shipping.
I guess you are right. With the OE tires he will have no rubbing with a 35+
But will be limited in the future if he wants to upgrade to wider rubber right?
songaThread starterMA, USA · Nov 27, 2008#8thanks guys! i dont think ill ever want to go wider anyway...i dont really want to do anything thats gong to hurt fuel economy as that is the main reason why i chose this car over many others. but that 15" setup with 35 offset sounds good with 185OEM tires.
Tonavidie Vereinigten Staaten · Feb 17, 2009#9If I understand correctly...
I could buy some 15x6 wheels and put my stock 185/60/R15 (Potenza RE92) tires on them with no problems at all???
I hope so, as 5.5" wheels are harder to find.
kimonaHuntington Bch, CA · Feb 17, 2009#10 Originally Posted by
Tonavi ↑ If I understand correctly...
I could buy some 15x6 wheels and put my stock 185/60/R15 (Potenza RE92) tires on them with no problems at all???
I hope so, as 5.5" wheels are harder to find.
185/60/15 tyres will safely fit wheels from 4.5"-7.0" in width.
phenoyzlas vegas, alabang · Feb 18, 2009#11 Originally Posted by
CASTREX ↑ Yes....
Your Stock wheels will fit into a 6.5" wheel with no problem.
A lot of people here have done it.
A little advise... the offset on that wheel is a little low for the Yaris. That one on your link is a +35
You could have some rubbing.
It should be ok as long if you don't plan on lowering the car on the future. Or you don't usually carry 3 grown ups in the back of your car.
For an un-lowered car the ideal offset should be 40+ or higher.
For a lowered car you should look for 42-45+ offset🎉
what if your offset is 41? is it still ok
i'm planning to lower my sedan
15x7, 41 offset
kimonaHuntington Bch, CA · Feb 18, 2009#1215x7, ET41 should work just fine.