Yarisworld Archive

OFFICIAL 1/4 mile time thread *TIMESLIPS REQUIRED!!*

218 posts · 317,515 views · page 5 of 5

Replies continued

ivanstepulchicago · Apr 13, 2015#201
I went to the drags a while ago with my 2008 3rd liftback and posted best time of 15.969
mods
intake
manual trans
header
midpipe(with stock muffler)
weight reduction ocd( i took off front license plate, folded mirrors, took off antenna, hubcaps, loose change, carpet, passenger seat)

1 attachment not included in this copy

malibuguyWestminster, MD · Apr 15, 2015#202
Ill have to dig around for the picture on my other phone, but my best last year was 16.3@84mph launching it soft on snow tires.

I could probably snab a 15 if i put stickies on it and kill the clutch
33OHDover, Ohio · Apr 16, 2015#203
Damn, 15's are pretty impressive with just a few mods.
S2robbinSuriname · Apr 27, 2015#204
2007 Vitz RS non-turbo
1nzfe manual
16" original rs wheels
broke both bee hive stone thingy in the cat kept the stock resonator and stock piping and a cheap ebay mufler with silencer
engine is bone stock with stock air filter

1 attachment not included in this copy

EchoLaQuaAustralia · Jan 3, 2016#205
2000 Echo
- 1nz
- Standard 2nz gearbox
- Custom manifold
- TD04L (wrx turbo... Super laggy on the 1nz)
- 2.5" dump/exhaust
- Xr6t front mount
- 14x7 rebanded steelies wrapped in the cheapest 185/60's around (32psi)
- Full tank of fuel/sub/power tools/spare wheel
wheel

15.0! Was my first time at the track so I think I did pretty well. Only got in one run.

Barely got traction till a quater of the way through second gear. So with a bit of weight reduction, better/deflated tires, dialing in the gain on the ebc (which I'm yet to install) and of course, more practice, I think I'm a chance of a high-mid 14.

1 attachment not included in this copy

MugenRepCentral Pennsylvania · Apr 7, 2017#206
Not a Yaris or a 1NZ, but a 1NR-FE and I know there are a few other guys here with 1NR-FEs. Heading to the track and reserving this space for timeslip and modification list. Trying to beat the Motorweek record of 17.4 @ 80mph. Fingers crossed for a 16.999 run or better, but my goal is only better than Motorweek.


***UPDATE***

I managed to get 6 runs in before the CVT was too heat-soaked which resulted in my retirement to go home. Looks like I'll be needing a secondary small aluminum radiator before the CVT to aid in cooling.

In any case, I made my goal to beat Motorweeks best factory time of 17.4 @ 80mph (mostly). I managed a 17.348 @ 79.10mph with headwind gusts of 25mph (pics in comments) and a gradual incline from the line to the traps of around 6-12 feet. Over all, I'm satisfied for a car with 94hp and 89tq and although a 16.999 would have been nice to see, I'm sure I'll manage it at some point in the future.

Thanks to a friend, who managed to record a video against an Evolution X, that somehow only managed a 16.091 @ 97mph to my 17.348 @ 79mph. So here's the vid, with pics and other info.

Modifications - 1ZZ throttle body, K&N drop in filter with velocity stack forward facing on airbox, DC Sports catback exhaust.

4 attachments not included in this copy

ern-dizCA all day · Apr 7, 2017#207
Good luck!
MugenRepCentral Pennsylvania · Apr 8, 2017#208
Originally Posted by ern-diz ↑
Good luck!
Thanks Sir!!! All updated above!
ern-dizCA all day · Apr 10, 2017#209
Originally Posted by MugenRep ↑
Thanks Sir!!! All updated above!
Looks like you gained some good knowledge/experience on how the car performs and managed to beat the Motor Trend numbers --all while having a good time. Super cool.
MugenRepCentral Pennsylvania · Apr 10, 2017#210
Originally Posted by ern-diz ↑
Looks like you gained some good knowledge/experience on how the car performs and managed to beat the Motor Trend numbers --all while having a good time. Super cool.
Yes Sir! Wasn't my first time at the strip, but it was definitely my first time with any sort of automatic (previously with my supercharged Ep3 running 13.8 at 105mph). Launching in this car is going to require some experimentation as it only revs to 2200rpms and doesn't seem to want to come up to the full 6250 rpm very quickly from a stop. I saw on a few other boards that people lightly let off and slam their foot back down to engage a computer response that encourages a steeper variable gear to be chosen. I don't know though as I've yet to try it. Yesterday morning I also made sure to change a few things including fully gutting both primary and secondary cats (seems like it made a difference, but who knows). Now to install the Camcon, take the backseat out, put my lighter motorcycle Deka battery (made for liter bikes), get some thermal material and see if I can add a gasket between the block and intake manifold, and do a Maxbore port and polish. Then see what it can do in a 1/4 mile run.
ern-dizCA all day · Apr 13, 2017#211
Man, you've got what sounds like a good plan to me. Deka battery, interesting. Is the trade-off just not lasting as long, or?
MugenRepCentral Pennsylvania · Apr 13, 2017#212
Originally Posted by ern-diz ↑
Man, you've got what sounds like a good plan to me. Deka battery, interesting. Is the trade-off just not lasting as long, or?
Thank you, Sir! I did have a Deka ETX for awhile on my Ep3 and it did have a shortened life of about 2 years versus 5-6 of my previous Red Top Optima battery. CC amps are lower at around 200cc to 320cc depending on the Deka chosen.
Turbiinifinland · Jan 2, 2021#214
not yaris but engine is, car rwd carina about same weight than yaris verso.

2NZ-FE
Custom intakemanifold
bosch 957cc ev14 injectors
Masterpower r494 turbo
migrosquirt module
cp pistons 10.2 comp ratio
autoverdi conrods
w58 tarns from mk4 supra na
hilux lsd dif.
fuel e85
stock cams
brian crower valve springs

1 attachment not included in this copy

RomanDaveNew Zealand · Nov 29, 2021#215
2005 NCP10

Prius Type C 1NZFXE with Silvertop ITB
Link G4+
standard header and exhaust
JUN 264 cams
BC valve springs
C56 gearbox.


14.74 @ 94.6mph
2.572 60ft

So definitely some good potential to go quicker with a good launch.
A decent exhaust would likely help a lot too!

Picture not included in this copy

1 attachment not included in this copy

RomanDaveNew Zealand · Jan 19, 2022#216
Ran a 13.8 @ 99 mph

Stoked!

Faster than I thought an NA 1NZ would be.

Picture not included in this copy

Picture not included in this copy

2 attachments not included in this copy

RomanDaveNew Zealand · Apr 9, 2022#217
I ran a new PB, but the timeslip has awful printing on it that's hard to read.

Important parts:

60ft: 2.09
Quarter mile: 13.49 sec
Trap speed: 99.5mph

Happy with that!

Here's a video of the run.

https://www.youtube.com/watch?v=EsjwkvBHAqI
ardianpradanaJakarta - Bandung , Indonesia · Dec 14, 2022#218
last weekend at sentul drag fest 2022, indonesia

16.204

in indo drag race, we didn't get the timeslips, so we used the time from the official results

Picture not included in this copy

Picture not included in this copy

will replace the heavy OZ futura for lightweight enkei for next year, hopefully this car will run constant 16.0, as the class I participate is index 16.0 class

in Indo there's 1500cc NA class, but the regulation is unclear so I'm not joining that class