NonStopTuningOriginal postUSA · Nov 21, 2008#1Replies 70
CASTREXCosta Rica · Nov 21, 2008#2How could you not love NST!!!
When can I have mine? 👍👍
edit:Available on Jan-09 😳
Would Garm carry these?
NonStopTuningThread starterUSA · Dec 1, 2008#3UPDATE NEW NST GB ON ScionLife...
http://www.scionlife.com/forums/viewforum.php?f=277 And before we get this question, let me go ahead and address this issue....
I know that originally we talked about doing a crank pulley and alternator pulley... we have since chosen to go a different route...
We will offer our 10% Underdrive Crank Pulley as a solo item. This pulley is roughly 70% lighter than the OEM pulley and will provide the best mix of performance and daily drivability for our customers. You will see better HP and TQ delivery, better throttle response, better gas mileage, and absolutely NO headaches or worries about accessory output.
The Alternator Pulley has been scratched, and will likely not be offered as a production item for the xD. This is due to the fact that removal of the alternator, and installation of a new pulley, have shown to be a big pain! Spending the great deal of time and effort on this install, or paying a shop for this installation, would likely turn most people away from this mod. In short... an alternator pulley is probably not worth the effort for 90% of you out there.
So get ready to pick up one of our crank pulleys and enjoy the great benefits at a rock bottom price!!!
👍👍
CASTREXCosta Rica · Dec 1, 2008#4I already signed for 2 pulleys! 👍
Mike,
I don't require INTL shipping for my pulleys but all the other TS owners are in Europe. I guess they will be interested in knowing if you will be able to ship to them. And roughly how bad is the shipping to Europe.
NonStopTuningThread starterUSA · Dec 2, 2008#5We can definitely ship to any country in Europe. USPS Global Express Mail is roughly $20 to $25 for such a package and is calculated by our online shopping cart at the time of each order.
👍
RaftermanZwickau/Germany · Dec 2, 2008#6yeeehaaaa...sounds good 😁
Yaris PalmeAustria · Dec 2, 2008#7sounds good.
can we also order this vom microimage?? i need also parts from them...
CASTREXCosta Rica · Dec 2, 2008#8Since this is a group buy, in order to have access to the special (introduction) price you need to order from NST.
How ever, you could tie off with Mike from NST and have your Pulley sent to Garm. USPS shipping within the USA is pretty cheap.
Then Garm could consolidate the pulley along with all the other parts you are buying from him.
CASTREXCosta Rica · Dec 2, 2008#9I'm already signed for the group buy in the official Thread over at Scionlife.com but for all the TS owners from Yaris World we could start a list over at this thread.
Yaris Palme, Rafterman
Let me know if you would like to be added to the Group buy.
The last date to join is Dec-15 and the payment should be submitted soon after that date. The pulleys will be shipped 6 wks later. (probably by the end of January)
Yaris PalmeAustria · Dec 2, 2008#10i think i will buy one.... but 15.dez.... it is to early for me.......
and i also will test my paypal account. i don´t know if it really work.
CASTREXCosta Rica · Dec 2, 2008#11I'm sure you can pay with a credit card as well.
According to Mike the GB finishes on Dec-15 (That's the last day to join the group) Then NSt will give 10 extra days to submit all payments.
In the worst case you will be able to buy it later. It will cost $118 instead of $99. but other than that no big deal...👍
Yaris PalmeAustria · Dec 2, 2008#12 Originally Posted by
CASTREX ↑ I'm sure you can pay with a credit card as well.
According to Mike the GB finishes on Dec-15 (That's the last day to join the group) Then NSt will give 10 extra days to submit all payments.
In the worst case you will be able to buy it later. It will cost $118 instead of $99. but other than that no big deal...👍
not everybody has a creditcard ;) i don´t have one, because i don´t need it, here in Austria.
NonStopTuningThread starterUSA · Dec 2, 2008#13PayPal would be the easiest way for international customers to place an order with us.
Thank you everyone, I appreciate it!
NonStopTuningThread starterUSA · Dec 3, 2008#14PS. Thank you for all your help and support Mr. CASTREX, we certainly do appreciate it very much!
👍👍
CASTREXCosta Rica · Dec 8, 2008#15Bump!
No more interested people on the pulley here? 🤷
We are close to the deadline for the Group buy and we still need 5 more people to join.
constantinRomania/Craiova · Dec 8, 2008#16I am interested but the only thing that worries me is the instalation. How ... ?
Yaris PalmeAustria · Dec 8, 2008#17like to change the V-belt.
unstiff the compressor of the aircond.
unstiff the alternator
pull of the stock pulley.
so i think. pls correct me, if i write some wrong.
CASTREXCosta Rica · Dec 8, 2008#18You got it right.
You need to loose the alternator bolt to loose the belt.
The you can remove the crank pulley by removing the right front wheel.
Is really simple. The only thing to consider is that removing the Crank pulley bolt is going to be really hard if you do it by hand.
An Air/Impact gun/wrench would be highly recommended. With the right tools it should be a mater of 1/2 an hour.
Here is a link with a small write up and some pictures so you have a better idea of the installation:
http://www.scionlife.com/forums/viewtopic.php?t=243432 NonStopTuningThread starterUSA · Dec 8, 2008#19Very good installation guide 👍👍
We need more members to join our list, to make this a reality sooner rather than later folks.
SO GET ON DA BUS!!!
CASTREXCosta Rica · Dec 10, 2008#20We only need 3 more people!!!
If you are interested join the club now...! Who knows when will more of these become available..!
Dead line is Dec-14
NonStopTuningThread starterUSA · Dec 10, 2008#21We need more people to GET ON DA BUS!!!
abdiel hiramPanama · Dec 10, 2008#22[QUOTE=CASTREX;187838]I already signed for 2 pulleys! 👍
Hi There Castrex, i just sent a PM.... off topic but will appreciatte any help.
CASTREXCosta Rica · Dec 12, 2008#23Only 2 more days for the GB!! 😳
NonStopTuningThread starterUSA · Dec 12, 2008#24LET'S MAKE THIS HAPPEN FOLKS!!!
CASTREXCosta Rica · Dec 15, 2008#25Thanks Garm!!!!
MICROIMAGEONLINE.COM FTW!!! 👍
CASTREXCosta Rica · Dec 15, 2008#26^^^
For the Euro guys who were thinking on getting one of these Pulleys...!
Good news
Our beloved sponsor Garm (Microimageonline.com) will be stocking a few pulleys!
NonStopTuningThread starterUSA · Dec 15, 2008#27 Originally Posted by
CASTREX ↑ ^^^
For the Euro guys who were thinking on getting one of these Pulleys...!
Good news
Our beloved sponsor Garm (Microimageonline.com) will be stocking a few pulleys!
GARM OF MICROIMAGEONLINE.COM has decided to take SIX of these pulleys in order to make this GB a reality.
WE ALL owe him a lot of thanks for all his hard work and support.
Thank you GARM!!!
Please visit the following link for more info...
http://www.scionlife.com/forums/view...900571#3900571 👍
Yaris PalmeAustria · Dec 15, 2008#28yeah thanks Garm.
then i can also order some other things from your shop? ;)
cali yarisCanoga Park, CA · Dec 15, 2008#29my pleasure guys, hope we can sell them
Yaris PalmeAustria · Jan 6, 2009#30 Originally Posted by
cali yaris ↑ my pleasure guys, hope we can sell them
when did you get one pulley???
i just need the full price OF:
the pulley
the carbon front emblem (i think i read 98$)
and the shippingcosts to AUSTRIA (EUROPE)
then i can send my money on my paypal account and 1week later i can order and send the money instant to you.
and did you have a microimage sticker for me? ;)
cali yarisCanoga Park, CA · Jan 6, 2009#313 pounds to Austria is $31 US. that is for USPS Priority International.
$118 pulley (I think, will have to check with NST) + $98 CF emblem + shipping
MI sticker is free 😁 what color do you want?
shtouROMANIA · Jan 7, 2009#32me also i want one pulley-graphite color-when it will be avaible?i'm from Romania;how much will cost in total with transport and how can i make the payment for it?
Yaris PalmeAustria · Jan 7, 2009#33 Originally Posted by
cali yaris ↑ 3 pounds to Austria is $31 US. that is for USPS Priority International.
$118 pulley (I think, will have to check with NST) + $98 CF emblem + shipping
MI sticker is free 😁 what color do you want?
finally 247$, all incl.?
sticker in white pls.
when could you send all parts?
thx.
CASTREXCosta Rica · Jan 7, 2009#34 Originally Posted by
Yaris Palme ↑ when did you get one pulley???
NST just started working on the pulleys.
They should be ready by the end of January or early February 😉
Yaris PalmeAustria · Jan 7, 2009#35ok thx.
can´t wait to get one :D
andriesSpain · Jan 24, 2009#36Can someone explain to me what's the meaning is of "10% underdrive" by the NST pulley?
Is it means that he is 10% smaller than stock?
CASTREXCosta Rica · Jan 24, 2009#37 Originally Posted by
andries ↑ Can someone explain to me what's the meaning is of "10% underdrive" by the NST pulley?
Is it means that he is 10% smaller than stock?
Exactly... the diameter is 10% smaller tha the stock pulley.
Here is a brief explanation from NST website:
Think of it this way, underdrive means to slow down. Underdrive crank pulleys found at NonStopTuning are designed to slow down engine accessories and reduce parasitic loss.
Crank pulleys, attached to the outside of the crankshaft, are the source of power for a car's accessories. The alternator, power steering, water pump, and air conditioner are all belt driven units, attached to the crank pulley, that use horsepower from an engine to provide their own services. This draw of power by these accessories is called parasitic loss. NST underdrive crank pulleys increase an engine's horsepower by reducing the power required to drive these external accessories. By replacing factory pulleys with carefully resized units, the accessories are slowed enough so that their performance does not suffer, but just enough so that more horsepower is sent to the wheels and put to the ground. Where horsepower should be!
The R&D team at NST is dedicated to developing underdrive crank pulleys that provide great gains for track days and continue to deliver proper accessory output for everyday street use.
NST equipped cars do better on the track, benefit from increased accessory life on the street, and also deliver better mile-per-gallon fuel efficiency. andriesSpain · Jan 24, 2009#38Oke, thanks
And they will fit with the stock belt?
cali yarisCanoga Park, CA · Jan 24, 2009#39yes -- But I don't know that it is 10% diameter or 10% circumference. Diameter measurement makes the most sense.
NonStopTuningThread starterUSA · Mar 5, 2009#40NonStopTuningThread starterUSA · Mar 10, 2009#41CASTREXCosta Rica · Mar 11, 2009#42Nice...!
My pulley will go in next week!!!
Can't wait...!
NST FTW!! 👍
andriesSpain · Mar 16, 2009#43 Originally Posted by
CASTREX ↑ Nice...!
My pulley will go in next week!!!
Can't wait...!
NST FTW!! 👍
And, how does he?
CASTREXCosta Rica · Mar 16, 2009#44Not here yet... I should have it by Wednesday. Probably will have time to install it until the weekend... 🙁
NonStopTuningThread starterUSA · Mar 18, 2009#45 Originally Posted by
CASTREX ↑ Not here yet... I should have it by Wednesday. Probably will have time to install it until the weekend... 🙁
Good luck with the install. Should be a breeze 🙂
And for anyone else who is interested in one of these... We have a good number of these available for immediate shipping.
👍👍
CASTREXCosta Rica · Mar 18, 2009#46OK, so after several weeks of waiting....
My pulley arrieved today!! Along with some other goodies 😁
It looks awesome!! I hope I'll have time to install it this weekend...
By courtesy of Mike@NST and Garm@Microimageonline... 👍 thx!
There are 2 pulleys on the pic, one is for my buddy gomez1184
2 attachments not included in this copy
cali yarisCanoga Park, CA · Apr 7, 2009#47IN STOCK... fyi
NonStopTuningThread starterUSA · Apr 7, 2009#48 Originally Posted by
CASTREX ↑ OK, so after several weeks of waiting....
My pulley arrieved today!! Along with some other goodies 😁
It looks awesome!! I hope I'll have time to install it this weekend...
By courtesy of Mike@NST and Garm@Microimageonline... 👍 thx!
There are 2 pulleys on the pic, one is for my buddy gomez1184
I love the pics 👍👍
NonStopTuningThread starterUSA · May 16, 2009#49Anyone else?!
CASTREXCosta Rica · May 28, 2009#50OK OK... sorry! A little confession to make... I was not able to install the pulley until a week ago... Work a lots of things to do kept the pulley in my desk for several weeks...
But is finally on and after a week of driving with it I can now post my impressions!
The installation was really easy... I took like 15 min. I didn't do it sooner because I didn't had an impact gun to pull out the OE pulley. I went to a friend who had one and it took us longer to loose the alternator than taking the oe pulley off and the new one on.
Amazing product!
Probably the best bang for the buck out there for the 2ZR-FE engine. 👍
Unlike the gains from my Fujita CAI or exhaust that you can feel them on the higher revs, the NST underdrive pulley provides gains all across the rev band...
Don't buy it expecting a huge improvement... but I can tell you this is something that you can actually feel! 👍
iirc the back to back dyno testing that Richard Holdener did for the 1.5L Yaris underdrive pulley showed a solid 3whp gain. Now I can tell you that the OE pulley from the Yaris TS is almost twice a big as the OE pulley from the 1.5Yaris and the weight savings are much larger on the Yaris TS.
I would not be surprised if the actual gains in our car are around 5whp with this U pulley.
Other impressions:
The throttle response is improved... I love that rev matching down shifting is easier and smoother now.
For the people worried about the use of an under drive pulley...
I have a DVD audio system, 6 speakers and 4 channel 350w amp and use the A/C every day... no problems after a week of driving!!
Finally a little side review:
I also installed the NST metal bushings. The ones that go one the engine side....
WOW!!
I love them! I already had the NST SSK but now with the cable bushings, the gears feel really sporty...
When I push a gear on you can almost feel a click when the gear goes on... no more mushy feeling!
I've been driving like 😈 during the last week!!!
Thanks NST!! 👍