Yarisworld Archive

amp/sub cutting out need help!!

14 posts · 4,106 views

SweetRSOriginal postOttawa · Nov 19, 2008#1
i have a jvc kd g430 and a 4-channel 300.1 phoenix gold amp for a 12" kicker, i have everything wire properly - ithink - and it sounds good right til the point where the amp turns off frequently, i dont understand this problem, can some one please tell me what to do? do i need a cap???

Replies 13

TinyGiantRochester, NH · Nov 19, 2008#2
might be over loading.. the ohm load right?
staypuftchicago · Nov 19, 2008#3
maybe amp getting 2 hot? or your wires are reversed
sportin83central IL · Nov 20, 2008#4
how are the speaker wires wired from the sub to amp? bridged or stereo, is the sub dual voice coil? 2 ohm or 4 ohm?
SweetRSThread starterOttawa · Nov 20, 2008#5
Originally Posted by sportin83 ↑
how are the speaker wires wired from the sub to amp? bridged or stereo, is the sub dual voice coil? 2 ohm or 4 ohm?
im pretty sure its bridged. its not dual voice coil, and i dont remember which ohm it would be. ill have to take a look at it... could that be my problem? that im overloading it? sometimes the sub with have a minor popping sound too.
IllusionXBrossard, QC · Nov 20, 2008#6
phoenix gold 300.1 is a 4 channel amp ?
SweetRSThread starterOttawa · Nov 20, 2008#7
[QUOTE=IllusionX;179183]phoenix gold 300.1 is a 4 channel amp ?[/QU

sorry it says on the amp Q X 300.4
Picture not included in this copy
SweetRSThread starterOttawa · Nov 20, 2008#8
[QUOTE=IllusionX;179183]phoenix gold 300.1 is a 4 channel amp ?[/QU

sorry it says on the amp Q X 300.4

Picture not included in this copy

and this is the sub, its a kicker f12a (thats whats it says on the sub itself)

Picture not included in this copy
TinyGiantRochester, NH · Nov 20, 2008#10
its not made to run mono... that might be the reason

edit.. maybe it is. weird they dont put the rating for the mono in the specs
SweetRSThread starterOttawa · Nov 20, 2008#11
yeah i might change the amp anyway, the sub is 4 ohms and im only using 1 out of the 4 channels. and it says that if its only 2 channel than its will be 2 ohms, im not a genius and i dont really know what that means or whether its a bad thing....what do u think??


there are three rca plugins on the amp. front, rear, and output. my rcas and plugged into the "front" plug in, although its plugged into the "rear" rca plugin on the deck, i get bass from the sub, just im tired of it turning itself on and off numerous amount of times when i drive. There is a switch on the amp so that u can switch from front only input or front and rear together input" , i have it on front only.
SweetRSThread starterOttawa · Nov 20, 2008#13
so do you think that this would be a better bet??

MTX 1-Channel Car Amplifier (TC3001)
Picture not included in this copy
sportin83central IL · Nov 22, 2008#14
that mtx amp should work fine, but if sub is a single 4 ohm you would be best off with a 2 channel amp.