Yarisworld Archive

Where to find Black Dash kits

33 posts · 7,767 views

DerKaiZeRsOriginal postPerth WA · Nov 19, 2008#1
Hi..

Anyone know where I can buy the black dash kits for Yaris Sedan..??
looks gorgeous. 😁😁


Picture not included in this copy

🆘🆘🆘

Replies 32

ztrack157Biggs, CA · Nov 19, 2008#2
Dude not a kit thats just painted.
darkmoon87Vancouver, BC · Nov 19, 2008#3
imho it gives even more of that cheap plastic look unless you paint the door panel and etc with the matching color.

I'd only go with cf scheme for those dash-kit or similar ones

Maybe it's my taste...lol
eTiMaGoBangkok, Thailand · Nov 19, 2008#4
Picture not included in this copy

I don't mind 😁

But, I don't think these exist for the sedan?
AznGoukiCalgary · Nov 19, 2008#5
not bad at all...not bad at all
id3379Nov 19, 2008#6
don't think it exists for the sedan man, i looked, i just pop'd mine out tonight and painted em flat black..looks pretty dope imo. I'll post up pics in a few hours when its dry.
DerKaiZeRsThread starterPerth WA · Nov 19, 2008#7
Originally Posted by eTiMaGo ↑
Picture not included in this copy

I don't mind 😁

But, I don't think these exist for the sedan?

coolllllllllllllll..... 🎉🎉🎉


Originally Posted by id3379 ↑
don't think it exists for the sedan man, i looked, i just pop'd mine out tonight and painted em flat black..looks pretty dope imo. I'll post up pics in a few hours when its dry.
well.. I'm planning to do that.. but need some advice how to paint it. 🤷

Can't wait to see your pics 😳😳
IllusionXBrossard, QC · Nov 19, 2008#8
ya.. the piano black finish trim was made for the hatchback yaris RS.
TinyGiantRochester, NH · Nov 19, 2008#9
Picture not included in this copy
TinyGiantRochester, NH · Nov 19, 2008#10
Steps:

1.Lightly sand with a 0000 steel wool or a really fine sand paper
2. Dust off
3. Two Coats of Adhesion Promoter
4. Coat of Primer
5. Two- Three Coats of the Top Coat (the final Color you want it)



what i did for mine .. was sand, adhesion promoter , a coat of metalic Silver, a coat of Florescent green and then dust from like 2ft away the silver again to add the metal flake look to the green .. while the green paint is still wet.. I did it immediately after i painted with green .. to help the metal flake adhere better to the green :)
id3379Nov 19, 2008#11
here's mine finished...you prob want glossy black..mines flat.

Picture not included in this copy
PHXDEMONPhoenix, AZ · Nov 19, 2008#12
^^^^ Flat black looks the best IMO. What kind of paint did you use?
id3379Nov 19, 2008#13
Originally Posted by PHXDEMON ↑
^^^^ Flat black looks the best IMO. What kind of paint did you use?
This but not primer, just a flat black. Same can though.

Picture not included in this copy
darkmoon87Vancouver, BC · Nov 20, 2008#14
hmm flat black looks pretty nice!
id3379Nov 20, 2008#15
Originally Posted by darkmoon87 ↑
hmm flat black looks pretty nice!
Thanks, i thought it was more subtle and blended better and didn't look so flashy.
Sodium DuckWestern Mass. · Nov 23, 2008#16
What did you do for prep?
eiiLong Beach, CA · Nov 24, 2008#17
Originally Posted by id3379 ↑
Thanks, i thought it was more subtle and blended better and didn't look so flashy.
It looks super sick man. I definitely wanna do this, thanks for sharing!!!
Thej3sta2Orlando, FL · Nov 24, 2008#18
ill be painting mine up soon.
id3379Nov 24, 2008#19
Originally Posted by Sodium Duck ↑
What did you do for prep?
i sanded it with 320grit sand paper then wash'd it off and dryed it. Then just did about 6 layers of flat black
id3379Nov 24, 2008#20
Originally Posted by eii ↑
It looks super sick man. I definitely wanna do this, thanks for sharing!!!
here is a better quality pic from the meet..

Picture not included in this copy
IsLNdbOiLas Vegas, NV · Nov 24, 2008#21
That flat black looks really nice.
dybbukFredericton · Nov 24, 2008#22
That's slick. I should do this to mine.
id3379Nov 25, 2008#23
Originally Posted by echo_hrs ↑
pure seks...

Cheers
tanks. :)
smofskraBaraboo, WI · Nov 25, 2008#24
2 cans of flat black spray paint were all i needed to do the dash trim and all 4 door pockets. IMO it makes the sedan look how it should of from the factory. i still have to paint the dials though. i want paint them a different color but just haven't figued out what yet.

3 attachments not included in this copy

smofskraBaraboo, WI · Nov 25, 2008#25
im sorry for the crappy cell phone pics. i really need to invest into a camera
Pitt YarisPittsburgh · Nov 25, 2008#26
i like the pics i saw of the people that painted the dash kit, and the plastic around the guage cluster. *they did all parts gloss black* looked cool, and pics are somewhere on here but forget who did it
NorkotikEl Monte CA · Dec 7, 2008#27
can you demonstrate how to take all the dash apart i wanna do that to my car
ProhibitOklahoma City · Dec 7, 2008#28
Every piece in my car that is grey is being painted the black with blue flames like the outside of it. Will post pics as soon as I get them :)
TreyzLong Island, NY · Dec 7, 2008#29
Originally Posted by eTiMaGo ↑
Picture not included in this copy

I don't mind 😁

But, I don't think these exist for the sedan?
Thomas, any way you can source one of those clusters out for me 😁
DerKaiZeRsThread starterPerth WA · Dec 9, 2008#30
Originally Posted by id3379 ↑
i sanded it with 320grit sand paper then wash'd it off and dryed it. Then just did about 6 layers of flat black
sorry for the noob question.

-Just curious, why do we need to sand the panel with sand paper?
wouldn't it scratch the panel?? 😕😕


- what do you mean by "did about 6 layers"?
Does that mean you spray the panel 6 times?


and last question:
- What's the best distance for spraying the panel so that the result is smooth like yours?
TinyGiantRochester, NH · Dec 9, 2008#31
sanding gives the paint a slightly rough surface for the paint to grab on to. 300 grit sandpaper feels almost smooth.. it barely sands it .. but it gives it a rough surface for the paint to stick to. I would also recommend using an adhesion promoter as well .. which will help the paint stick

6 layers or 6 coats is nice.. that means you paint it (probably at a distance of 1 foot to 1.5 ft) you let it dry and do it again 5 more times..

I did two coats of adhesion promoter, and 4 coats of the paint. At some point i'll probably go ahead and do a coat of clear gloss to make it a little more shiny
TinyGiantRochester, NH · Dec 9, 2008#32
just take your time doing it ..

doing 6 coats means that the first coat can be really light .. then the next coat can be light so the end result is prefect
DerKaiZeRsThread starterPerth WA · Dec 14, 2008#33
Hey Tiny.. you are the man... 👍👍

thanks for the advice