EDIT: Sorry.. Pics are kind of Huge.. didn't know how to resize them on the forum..
Just thought i'd share with you all;
Was inspired from a tutorial from audio site to create something of my own...
Actually.- my first working with wood.. and in that regard, first enclosure :]. Not bad for a 16 year old.
Tomorrow will be the official Listening day. Run that fekkin' beast from DLS a3 (temporary)
Go easy guys ':p
Raw materials.
-12" Diameter Concrete molding tubes - Home depot.
-Gorilla Glue
-Caulk *for reinforcement
-3/4" MDF
-Dedication, and Free time.
-Speaker Terminal Plates / Solder+Wire
Picture not included in this copy
My 'Blueprint'
Picture not included in this copy
Tight,
Didn't get a chance to go pic by pic during the install..
But just an idea -- Pretty much self explanatory
Gluing
Picture not included in this copy
Picture not included in this copy
Speaker terminal plates on opposite ends.
Picture not included in this copy
final product :
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm not going to lie.. I did put a bit of work into these boxes. Amazingly enough, i didn't have to measure much out besides the volume and initial cuts.
Much of the box was done by eyeballing...Seeing how it was intended for a 'quick' temporary test box.
-I wasn't so fortunate with 30 minute procedures like the some of the skilled woodworkers on here. But--Overall it was pretty straight forward. And i'm proud of what i got :].
It's very solid.. i'm quite suprised. I could probably hop on my box and not have it show any signs of torment whatsoever.
Cost : 8$ tube + 6$ gorilla glue homedepot, 1$ screws, ~12$ 3/4 Mdf. (i forgot exact cost...).
Cheap and affordable.. I'm happy, and thats all that counts.
Just thought i'd share with you all;
Was inspired from a tutorial from audio site to create something of my own...
Actually.- my first working with wood.. and in that regard, first enclosure :]. Not bad for a 16 year old.
Tomorrow will be the official Listening day. Run that fekkin' beast from DLS a3 (temporary)
Go easy guys ':p
Raw materials.
-12" Diameter Concrete molding tubes - Home depot.
-Gorilla Glue
-Caulk *for reinforcement
-3/4" MDF
-Dedication, and Free time.
-Speaker Terminal Plates / Solder+Wire
Picture not included in this copy
My 'Blueprint'
Picture not included in this copy
Tight,
Didn't get a chance to go pic by pic during the install..
But just an idea -- Pretty much self explanatory
Gluing
Picture not included in this copy
Picture not included in this copy
Speaker terminal plates on opposite ends.
Picture not included in this copy
final product :
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm not going to lie.. I did put a bit of work into these boxes. Amazingly enough, i didn't have to measure much out besides the volume and initial cuts.
Much of the box was done by eyeballing...Seeing how it was intended for a 'quick' temporary test box.
-I wasn't so fortunate with 30 minute procedures like the some of the skilled woodworkers on here. But--Overall it was pretty straight forward. And i'm proud of what i got :].
It's very solid.. i'm quite suprised. I could probably hop on my box and not have it show any signs of torment whatsoever.
Cost : 8$ tube + 6$ gorilla glue homedepot, 1$ screws, ~12$ 3/4 Mdf. (i forgot exact cost...).
Cheap and affordable.. I'm happy, and thats all that counts.