Yarisworld Archive

Drift Yaris + NST Pulleys = :)

21 posts · 12,869 views

thefothOriginal postBellevue, WA · Nov 17, 2008#1
HEY Everyone!

Picture not included in this copy

Back in the spring I started a dialog with the great folks at NST. I wanted a little more power out of the 3RZ engine in the Drift Yaris and they agreed to build some prototype pulleys! Aside from the custom intake and headers, this seemed like a good logical modification. I want to keep the car normally aspirated and didn't want to crack into the internals just yet. Therefore bolt-on externals seemed logical, and I already have the basics (I/H/E).

They made the process fairly simple and in a few short weeks after they moved into their new and improved facility we were in business. I had a brand new set of pulleys on my door step.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

The installation went virtually painlessly. The Yaris has a very open engine bay and being that I’ve had this thing together and apart so many times it made it very easy to get in there and install these new parts in a mere 30 minutes. The full installation is viewable on my Drift Yaris Blog or Flickr.

http://www.mospeed.com/yaris/archives/111

Or

http://www.flickr.com/photos/32520229@N03/

After installing the pulleys the results are clear. The car starts and idles more smoothly. Upon acceleration the throttle response is quicker. The car picks up and goes much much nicer than it had before. There had been a small bogging out upon first starting out, but this seems to have gone away now.

Overall the experience has been very pleasant. The people of NST have worked well with me through my crazy life the last few months and I look forward to bringing the car out in the spring time for some test n’ tunes.

Replies 20

AstromanWenatchee, WA · Nov 17, 2008#2
🤤

I can't wait to see this thing perform live someday! Welcome to the NST club! 😁
CASTREXCosta Rica · Nov 17, 2008#3
Does the drift Yaris actually drifts?

I have only seen stand still pics of this car... 🤷
at3GGVA Beach · Nov 17, 2008#4
what the heck is a 3rz?
CASTREXCosta Rica · Nov 17, 2008#5
Originally Posted by at3GG ↑
what the heck is a 3rz?
Thats a 4cyl Tacoma engine. 2.7L
yarisugiハワイ · Nov 17, 2008#6
aaaah! The infamous RWD Yaris! I haven't seen this car in ages. Any updates or videos on it?
at3GGVA Beach · Nov 17, 2008#7
ahhhh tacoma huh? niice
SilverBackEl Monte, Ca · Nov 17, 2008#8
Got video of it in action?
pinoypizzaboylas vegas/ henderson · Nov 17, 2008#9
videos of this badboy please!👍
at3GGVA Beach · Nov 17, 2008#10
Originally Posted by pinoypizzaboy ↑
videos of this badboy please!👍
x2🤘
thefothThread starterBellevue, WA · Nov 17, 2008#11
Patience is a virtue :), all in good time. Times are tough right now; progress, videos and drifting debuts will all happen when things permit.
CASTREXCosta Rica · Nov 17, 2008#12
Originally Posted by thefoth ↑
Patience is a virtue :), all in good time. Times are tough right now; progress, videos and drifting debuts will all happen when things permit.
True, but just not a very common virtue here in YarisWorld...😁
bzinn 1University Place,WA · Nov 19, 2008#13
Foth.......I really want to go for a ride when you take it out......pretty sure Astroman and 39 do too........LOL
richardholdenerLas vegas, NV · Nov 19, 2008#14
The motor needs a manifold and long-tube header(s).
PHXDEMONPhoenix, AZ · Nov 19, 2008#15
Drift yaris 🙇
TreyzLong Island, NY · Nov 19, 2008#16
Sweet ... glad to see that you made it on the boards! Now we can get first hand scoops on you and your ride.
PETERPOOPOahu · Nov 19, 2008#17
i like how the car looked in your garage oppossed to now. but only if the old version wasn't plastered with stickers.
darkmoon87Vancouver, BC · Nov 20, 2008#18
saw this in person @ DTP last May in Vancouver....that engine looks HUGE in yaris engine bay...
thefothThread starterBellevue, WA · Nov 20, 2008#19
Originally Posted by richardholdener ↑
The motor needs a manifold and long-tube header(s).
Has an equal length header, but a manifold would be nice. So would would a built head with high lift cams and over sized valves... but all those things take money and/or time. I'm open to offers for either

Originally Posted by bzinn 1 ↑
Foth.......I really want to go for a ride when you take it out......pretty sure Astroman and 39 do too........LOL
Rides will be coming this spring. Waiting for an open SCCA day at Bremerton Raceway.

Originally Posted by Treyz ↑
Sweet ... glad to see that you made it on the boards! Now we can get first hand scoops on you and your ride.
I've been on the boards for a while, just don't post very often. There is the blog on http://www.mospeed.com/yaris/ that has most of the scoop on the car. Not sure what else you want to know but you're always welcome to hit me up on AIM: thefoth71

Originally Posted by PETERPOOP ↑
i like how the car looked in your garage oppossed to now. but only if the old version wasn't plastered with stickers.
I have a new graphics scheme for it that I'd like to have done by spring, maybe you'll like that better, maybe not... though I think it looks pretty good now I know it can look better.

Originally Posted by darkmoon87 ↑
saw this in person @ DTP last May in Vancouver....that engine looks HUGE in yaris engine bay...
Huge engine, little engine bay, though I'm sure there's room for more engine in there, I don't think the car needs much more power or it will become undrivable and out of balance. The new slant mounted oversized radiator does fill up the engine bay much nicer. I can't wait to get back to Vancouver this year, love it up there.
toyochrisPuerto Rico · Nov 20, 2008#20
my idol🙇🙇
thefothThread starterBellevue, WA · Nov 20, 2008#21
Idol's now accepting cash donations. 👍