Yarisworld Archive

Are my trd springs installed upside down?

13 posts · 5,756 views

YarisSedanOriginal postCalifornia - Bay Area · Nov 17, 2008#1
So if you have read my other posts i been having a lot of noise with my springs. Looking at other pictures of other members i think mine may be upside down. Do the tightly coiled springs supose to be facing up or facing down?

Replies 12

Malaya1221Torrance, Ca · Nov 17, 2008#2
any pics?
YodaFL · Nov 17, 2008#3
lol i did the same thing you talkng about the back ones right? The ones that are close together are suppose to be up to the chassi(sp) but it shouldnt make a diff as long as its the same diameter as top and bottom. Mine is upside down too ;) no problems
PhaetonPort Angeles, Wa · Nov 17, 2008#4
There actually is a difference in the ride with the springs upside down.
There was a pretty long thread about this before the hack.
TheRealEnthMiami, FL · Nov 17, 2008#5
So that means.... Fix em you guys =D
largeorangefontSo Cal, OC · Nov 17, 2008#6
Originally Posted by Phaeton ↑
There actually is a difference in the ride with the springs upside down.
There was a pretty long thread about this before the hack.
The flat side of the spring goes to the top, but there is no difference in ride if the rears are flipped. Springs are springs.

The ride height could be slightly changed if they are flipped or clocked differently, but they do not magicly change spring rate if upside down.
TheRealEnthMiami, FL · Nov 17, 2008#7
Yeah but just so it doesnt bother you inside thinking about it because you will be paranoid about it... fix it <3 pics pics pics
largeorangefontSo Cal, OC · Nov 17, 2008#8
Originally Posted by TheRealEnth ↑
Yeah but just so it doesnt bother you inside thinking about it because you will be paranoid about it... fix it <3 pics pics pics

Mine are in right, but no it wouldn't bother me.

The fronts would be a big problem if flipped however.
kounj · Nov 17, 2008#9
the one thing that might make a difference is if the end of the coil is not facing the same way as the other, i.e both facing < <.
largeorangefontSo Cal, OC · Nov 17, 2008#10
Originally Posted by kou ↑
the one thing that might make a difference is if the end of the coil is not facing the same way as the other, i.e both facing < <.
Yes, if they are clocked wrong, it could affect ride height, depending on how much the car is lowered, and how you have your spring isolators configured.
YarisSedanThread starterCalifornia - Bay Area · Nov 17, 2008#11
Hmm looks like mine are installed right =)

One thing i noticed though is they are not vertically strait it looks like. Kinda like a half moon bend in them. But i am sure i had them installed facing together the same way as the oem ones when i took them out. ANd put the spring insolators on the same way.

Is this normal orsomething i should be concerned about.
largeorangefontSo Cal, OC · Nov 17, 2008#12
As long as they are on the spring perches.. there is nothing to worry about.
YodaFL · Nov 17, 2008#13
dont worry if its installed wrong but if will easy your mine you can jack you car up again and do it all over...i kno i wont forget that lol