Yarisworld Archive

Location for compressor switch?

19 posts · 6,699 views

LtNoogieOriginal postWest Hills, CA · Nov 15, 2008#1
Where inside did you Blitz guys intall your compressor switch?

1 attachment not included in this copy

Replies 18

eTiMaGoBangkok, Thailand · Nov 15, 2008#2
stealth, nice! flat area by the handbrake is also a good spot, I think that's where echo_hrs put his?
LtNoogieThread starterWest Hills, CA · Nov 15, 2008#3
Thanks!
cali yarisCanoga Park, CA · Nov 15, 2008#4
Within reach! 😁

(although I would probably have it always on HIGH, lol)
KCALB SIRAYVirginia · Nov 15, 2008#5
Ditch the plate and just mount the switch and led. The plate looks like it came off of a Radio Shack walkie talkie
mrbondIllinois · Nov 23, 2008#6
You know, after seeing your thread on installing the Blitz compressor, I started looking around for places to put it. Inside the driver's side glove box looked pretty appealing to me.
LtNoogieThread starterWest Hills, CA · Nov 23, 2008#7
Originally Posted by mrbond ↑
You know, after seeing your thread on installing the Blitz compressor, I started looking around for places to put it. Inside the driver's side glove box looked pretty appealing to me.
That would be a good place but I'm still contemplating putting some gauges on the driver's glove compartment door like Garm did.

Also, I don't know yet whether it has to be in a place where I have to reach easily while driving. You know, when the bad guys are about to catch up to me, I need to activate the S/C and rocket to safety.😎

I'm leaning towards where Camell put it. I just need to find the DYI on how to remove the center console panels. That's all I need right now, tearing apart more of the little car.
mrbondIllinois · Nov 23, 2008#8
So it's safe for the compressor to change boost levels while the engine's going (aside from idling)? I'm debating quite hard whether or not to get the compressor. I commented on the wiring in the other thread you're doing. Makes me leery.
eTiMaGoBangkok, Thailand · Nov 24, 2008#9
as a reminder, this switch is not to set the amount of boost, but rather the point at which the compressor kicks in. Owners of the kit can confirm this, but low means you only need 10% throttle, mid means about 50% and hi 75%, or something like that. A bit counter-intuitive I guess!
LtNoogieThread starterWest Hills, CA · Nov 24, 2008#10
Yes, I commented to Garm on Friday that the switch should say NEVER, ALL THE TIME, SOMETIMES, RARELY.
mrbondIllinois · Nov 24, 2008#11
Originally Posted by eTiMaGo ↑
as a reminder, this switch is not to set the amount of boost, but rather the point at which the compressor kicks in. Owners of the kit can confirm this, but low means you only need 10% throttle, mid means about 50% and hi 75%, or something like that. A bit counter-intuitive I guess!
lol, I knew it didn't mean boost, I just couldn't think of a more appropriate word at the time. 🤷
Doc ZaiusOttawa, ON, Canada · Nov 24, 2008#12
Hey guys! I finally got around to mounting my switch yesterday... it had just been loose under my dash for the last 2 months! 😛 Check it out... what do you think... the ULTIMATE stealth mount! 😁

(I had originally wanted to mount it facing up, but would've required some fancy craftiness to make a back plate and glue it in there and drill holes and etc... maybe someone else will get inspired...?)

1 attachment not included in this copy

TamagoOff Grid · Nov 24, 2008#13
very nice stealth mount :) i did the same thing with my FIC :D
LtNoogieThread starterWest Hills, CA · Nov 24, 2008#14
I like it!
LtNoogieThread starterWest Hills, CA · Nov 24, 2008#15
Mike, I groaned when I read your description of the double wall cutting and drilling.

Aaron...👍
Doc ZaiusOttawa, ON, Canada · Nov 24, 2008#16
Originally Posted by camelll ↑
Doc you need to clean up that car a little bit!🤣
Dude, it's the end of November... winter's coming... I don't care! 😛
whooppee777Maryland · Nov 24, 2008#17
Originally Posted by KCALB SIRAY ↑
Ditch the plate and just mount the switch and led. The plate looks like it came off of a Radio Shack walkie talkie
HAHAHAHAHA no lie dude. ditch that shit
KCALB SIRAYVirginia · Nov 24, 2008#18
^ Just sayin, lol

So have you decided on the location yet LtNoogie?
LtNoogieThread starterWest Hills, CA · Nov 24, 2008#19
I'm hoping that I left enough cable inside the car to reach the same spot that Doc Zaius used.