Yarisworld Archive

Why industries turbo manifold?

34 posts · 9,466 views

anonymous userOriginal postwindward oahu · Nov 13, 2008#1
http://www.whyindustries.com/store/p...products_id=55

Why would why industries (i know, it sounds funny) design a turbo manifold but no supporting products to correspond with it?
Was there a kit that was pulled from their site?
Has anyone heard of these guys, or their quality?

Replies 33

CASTREXCosta Rica · Nov 13, 2008#2
Go to scionlife.com

Do a search for TURBOTOYOTAS. Thats their name. The owner is a guy named Todd.

You will find a lot of information... anything from horror stories, of people who waited a year for their parts to be delivered to people who praise them for the quality of their products.

About that manifold, Garm (Cali Yaris) has one installed on his car.

I believe they tried to come up with a full kit for the yaris but the parts they offered had all kinds of fitting problems.
PetersRedYarisThe Black Hills of South Dakota · Nov 13, 2008#3
But the manifold is good?
anonymous userThread starterwindward oahu · Nov 13, 2008#4
Thanks bud. I don't plan on buying anyhting from them until i find out the who/what/why's of their work.

Originally Posted by CASTREX ↑
Go to scionlife.com

Do a search for TURBOTOYOTAS. Thats their name. The owner is a guy named Todd.

You will find a lot of information... anything from horror stories, of people who waited a year for their parts to be delivered to people who praise them for the quality of their products.

About that manifold, Garm (Cali Yaris) has one installed on his car.

I believe they tried to come up with a full kit for the yaris but the parts they offered had all kinds of fitting problems.
cali yarisCanoga Park, CA · Nov 13, 2008#5
yes, the mani is good, pretty much the only good part out of the kit they had. Todd has since stopped making kits, and offers individual parts instead.
anonymous userThread starterwindward oahu · Nov 14, 2008#6
Thanks cali.
You know, coming from the suby community, i have been contemplating a twin-scroll turbo option. I'd love to get your takes on this! thanks.
Oh crap, yes i meant for the yaris.
CASTREXCosta Rica · Nov 14, 2008#7
Here is another option. This manifold should work for the Yaris

http://www.365motorwerks.com/turbomanifolds.aspx


Is the 365 MW manifold for their new scion xb kit. Looks really nice.

This guy used to be member of the forum, haven{t seen him for a long time now.
cali yarisCanoga Park, CA · Nov 14, 2008#8
that looks EXACTLY the same as Todd's
CASTREXCosta Rica · Nov 14, 2008#9
Originally Posted by cali yaris ↑
that looks EXACTLY the same as Todd's
hmmmmm🙄
Nexus1155Dorchester · Nov 14, 2008#10
replicated probably... who wants to let me jig it up... turbo manifolds for everyone :) $250 hahaha
mikenacaratoBrentwood, TN · Nov 14, 2008#11
so if you get a turbo kit for an xb what will not work if the manifold does?
cali yarisCanoga Park, CA · Nov 14, 2008#12
PLEASE BUY IT and find out for us.

I bet the downpipe wouldn't be the same, probably throttle body, ECU/tuning, piping for sure...
mikenacaratoBrentwood, TN · Nov 14, 2008#13
i would be glad to..maybe by xmas time. BUT i have emissions here, how would i remap the ecu for it? how did you do yours cali? as far as the throttle body goes you can get that blitz unit and im sure you would be fine. its the ecu AND the heat issues that im concerned with. how is the heat buildup in your bay caliyaris?
cali yarisCanoga Park, CA · Nov 14, 2008#14
not too bad on the heat, vented hood is recommended 😉

No one has remapped our ECU yet. Matter of fact, I think the car has only been successfully tuned in other countries! 😲

At least in CA, adding a turbo kit would make you illegal for smog from both visual and emissions standpoint.
mikenacaratoBrentwood, TN · Nov 14, 2008#15
how did you tune yours?
PETERPOOPOahu · Nov 14, 2008#16
he didn't. bleh
mikenacaratoBrentwood, TN · Nov 15, 2008#17
and it runs kinda correctly? lol
SabretoothSt Cloud FL · Nov 15, 2008#18
Efficiently and correctly are two opposite sides of the spectrum atm.


lol
TheRealEnthMiami, FL · Nov 15, 2008#19
Yeah, it could run way better if it was tuned. We just need to find someone who is eager enough to do it... Look at the GTR "the uncrackable cpu" boom... 2 days later its cracked...
cali yarisCanoga Park, CA · Nov 15, 2008#20
mine runs great, but goes lean at WOT over 5k rpm. OK for the street, but not good enough for the track. That's why we're going to standalone management.

I now know of three people who have had issues with the AEM FI-C not working out on our cars -- weird!!
at3GGVA Beach · Nov 19, 2008#21
I know basically what lean/rich means. When you say it runs lean over 5k...dos that mean you have to let off/shift before thats...or is there just a drop in boost? 🤷
Nexus1155Dorchester · Nov 19, 2008#22
then you don't know what it means lol... lean means AFR goes well over 12 or stoich in this situation where turbo makes best power around 11.* area
cali yarisCanoga Park, CA · Nov 19, 2008#23
lean means not enough fuel to have a good mixture = danger of detonation, frying a valve, etc.
cali yarisCanoga Park, CA · Nov 20, 2008#26
don't know, but interesting - thanks for posting that.
TamagoOff Grid · Nov 20, 2008#27
could you swap to a scion ECU?
at3GGVA Beach · Nov 20, 2008#28
i meant i know what lean meant as in its too lean of an air/fuel mixture. I was trying to find out what he meant by his car being streetable over 5k......do you mean you couldn't track it/push it to the limit frequently?
at3GGVA Beach · Nov 22, 2008#29
??
365MotorwerksNor Cal · Nov 24, 2008#30
Originally Posted by CASTREX ↑
Here is another option. This manifold should work for the Yaris

http://www.365motorwerks.com/turbomanifolds.aspx


Is the 365 MW manifold for their new scion xb kit. Looks really nice.

This guy used to be member of the forum, haven{t seen him for a long time now.
I'm still here, have been in the background though kicking back...
at3GGVA Beach · Dec 4, 2008#31
should basically any decent exhaust/muffler shop be able to make a suitable downpipe?
365MotorwerksNor Cal · Dec 4, 2008#32
Originally Posted by at3GG ↑
should basically any decent exhaust/muffler shop be able to make a suitable downpipe?
Yes and no...it's easy enough if they know what they are doing but to get a great job done you need to go to somebody who has done it a few times! Remember how nice a job Yimi (I think that's right?) did for Cali Yaris on his DP.
cali yarisCanoga Park, CA · Dec 4, 2008#33
YimiSport did a GREAT job on wiring, set up and the entire exhaust system. 👏
at3GGVA Beach · Dec 7, 2008#34
ok thanks good to know