Yarisworld Archive

harness bar help

105 posts · 19,522 views · page 1 of 3

turboyarisOriginal postSouthern New Jersey · Nov 13, 2008#1
Hey guys, I was looking into building you guys a harness bar for both the sedan and liftback. I need a little help though, as I no longer have a Yaris of my own. I need some pictures of the seat belt bolt areas, both the upper and lower where they attach to car. Also, I need the measurement from the upper seat belt bolts. I need the measurement from pillar to pillar. Also too if you guys could give me an idea of how far back behind the upper seatbelt bolt that your seats go. That way I can design the harness bar with enough room so that you can sit in a comfortable position for you. Thanks for the help guys. Also, If I could find someone in the South Jersey/ philly area so I can mock one of these up, that would be very helpful.

Replies 104

Never EnoughGrant, MI · Nov 14, 2008#2
That would be great! Keep everyone updated.
turboyarisThread starterSouthern New Jersey · Nov 14, 2008#3
well... i'm still waiting for someone to give me measurements... I can have these ready by the end of next week, but I need to get these measurements, and then I need to find someone with a yaris in my area, so I can make sure everything bolts up. These would be made out of chromoly and they would be 1 1/2" tubing to allow for the many camcorder mounts to work with the harness bar. I may also eventually make my own camcorder mounts if there is a demand for them.
I also need to know if there is a difference in width of the sedan and liftback, hopefully there is not, so that the product will work universally on both.
Benggolf2Richmond, B.C., Canada · Nov 14, 2008#4
Turboyaris, wouldn't it be simplier if you visited a Toyota dealer nearby instead so you can accurately take the necessary measurements? 😉
Just a suggestion, no pun intended. 🙂
cali yarisCanoga Park, CA · Nov 14, 2008#5
I'm working on it -- you asked me yesterday!
turboyarisThread starterSouthern New Jersey · Nov 14, 2008#6
haha i tried that, i went to the same one that I bought mine from and they were too busy to bother I suppose, anyways for right now I'm designing the brackets and I need to know the bolt size for the upper and lower seat belt bolts... I couldn't quite figure that out.
ddongbaphay · Nov 14, 2008#7
Would you really trust anyone else's measurement, other than Garms?
cali yarisCanoga Park, CA · Nov 14, 2008#8
jkuchta gives good measurements 😁
Never EnoughGrant, MI · Nov 14, 2008#9
Good luck guys!
TEHxFALLEN V1.2Calabasas, CA · Nov 14, 2008#10
I really need a harness bar!!!!! AHHHHHHH!!
jkuchtaL.A. · Nov 14, 2008#11
I'll try and get something together tomorrow night after work for you😉
turboyarisThread starterSouthern New Jersey · Nov 15, 2008#12
thanks man, the big thing I need right now, is the size of the bolts for the seatbelts, that way I can have the flanges made.... the harness bar itself will need to be made with a car in front of me, just in case haha, plus then like everyone said, I will have my own measurements which are all the measurements I need.
cali yarisCanoga Park, CA · Nov 15, 2008#13
K, I will pull a bolt and go match it for you today... M-something, LOL
jkuchtaL.A. · Nov 15, 2008#14
I wanna say M10x1.5....I'll pull one tonight.
dngzvancouver · Nov 15, 2008#15
awesome! i'm 100% interested in getting one for my sedan!
jkuchtaL.A. · Nov 15, 2008#16
Can't find my bolt gauge, but the head size on all of the seatbelt bolts is 14mm. I think that equates to a M10 size bolt, though I can't say for sure.
whooppee777Maryland · Nov 16, 2008#17
i wouldnt mind one of these
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#18
anyone get a chance to pull out those two seat belt bolts and measure them? apparently yaris owners in jersey are lame... no one wants to help me out with this haha :P
cali yarisCanoga Park, CA · Nov 17, 2008#19
Head size is 14mm, I'm off to Lowe's to confirm M10 status.

Here's a pic of the bolt with the spacer that comes with it:
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#20
dont go to lowes... i just need that spacers diameter, I'm basically trying to do this, i just need to make sure the hole in the bracket will go around that bolts spacer
Picture not included in this copy

and a simlar bracket for the bottom, thats the only real measurement I need before actually building the harness bars
cali yarisCanoga Park, CA · Nov 17, 2008#21
wtf? LOL

the big thing I need right now, is the size of the bolts for the seatbelts,
anyways.... it's an M12 1.25 -- the spacer is 3/4" in diameter and 1 7/16" long.
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#22
haha yea the need for the size of the bolt was because i didn't know about the spacer in there... but then i saw it.. dont worry i'll give u a sweet discount for your troubles... does the bottom have the same spacer?
cali yarisCanoga Park, CA · Nov 17, 2008#23
No it doesn't, and on my car, the bottom bolt is replaced with the eye-bolt for the harnesses.

The back face of my seat is 2" to the rear of the center of the upper bolt, by the way - although this will obviously vary from driver to driver.
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#24
ok so top bracket is done... and cali im guessing the bottom is just a 12mm bolt like the top then?

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
TheRealEnthMiami, FL · Nov 17, 2008#25
this is nice, harness bar will definitely appeal to many people.
bdc87Lake County, CA · Nov 17, 2008#26
Good to see this idea come to life. Finished product should be nice!
TEHxFALLEN V1.2Calabasas, CA · Nov 17, 2008#27
Count me in as your first customer, because I'm VERY interested! 👍
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#28
I was thinking of getting together a group buy, after the first product is complete, that way I can get a decent discount on powdercoating, as well as saving money on the shipping of materials to me... of course after the first one is built, so i can have some pictures for you guys
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#29
second bracket
Picture not included in this copy
nemesiszMiramar · Nov 17, 2008#30
Subscribed for interest.
whooppee777Maryland · Nov 17, 2008#31
could u build a roll cage?
mikenacaratoBrentwood, TN · Nov 17, 2008#32
subscribed...me wants a harness bar... :)

will they be around for a while or is this a limited group buy sort of deal?
TheRealEnthMiami, FL · Nov 17, 2008#33
hes makin one... if we like it... he will do a group buy and see where that kicks off.
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#34
Yes i can build a roll cage...
these will be around for a while... but after the initial interest has died I might make you wait a week, since I dont want to have a large overhead of harness bars lying around
mikenacaratoBrentwood, TN · Nov 17, 2008#35
well as long as i can get it later its cool, and if you can build a roll cage that will allow you to keep your interior that would be super sick
turboyarisThread starterSouthern New Jersey · Nov 17, 2008#36
yea i know that a roll cage looks cool but for you liftback owners it'd be very difficult to make it possible to use your back seats, not to mention the overall cost of a roll cage... remember you have to get it painted or powdercoated... so someone would really need to have a need for a roll cage if they were going to... but hey if someone wants to pay the price.... i'll make one
mikenacaratoBrentwood, TN · Nov 17, 2008#37
well i could have one made here locally but if you were going to make bolt in or weld in kits and be able to retain the interior i would give you the sale. :)

bolt in is not my preferred style cage so i would weld in the bold in if i had too.
turboyarisThread starterSouthern New Jersey · Nov 18, 2008#38
hahaha here is is... well an idea for you at least... i'm pretty bored so once i got the brackets done, i just went and did it all hahahahahah
Picture not included in this copy

Picture not included in this copy
turboyarisThread starterSouthern New Jersey · Nov 18, 2008#39
i just realized i didnt put in guides for the seat belt harnesses so they dont slip all over the place, they will be there in the final product, just a simple piece of 1/4 round stock bent so that ur harness are sure to stay behind your seats
TheRealEnthMiami, FL · Nov 18, 2008#40
well, i cant afford a rollcage but.. If i could, like everyone else probaly the same would say... we wouldn't mind losing our rear seats for it.
cali yarisCanoga Park, CA · Nov 18, 2008#41
I can't wait to use your harness bar with my harnesses.

I'll probably lose the back seat and put in my X-brace to go with it -- yeah!!

Picture not included in this copy
mikenacaratoBrentwood, TN · Nov 18, 2008#42
that harness bar looks great! if i ever get seats and harnesses ill pick one of these up for sure!

and is that a miracle x bar? i though they only made those for hondas.
cali yarisCanoga Park, CA · Nov 18, 2008#43
The Rear Crossbrace is now posted in my store (sorry for off-topic, but I think they would go together REALLY nice)
whooppee777Maryland · Nov 18, 2008#44
Originally Posted by turboyaris ↑
yea i know that a roll cage looks cool but for you liftback owners it'd be very difficult to make it possible to use your back seats, not to mention the overall cost of a roll cage... remember you have to get it painted or powdercoated... so someone would really need to have a need for a roll cage if they were going to... but hey if someone wants to pay the price.... i'll make one
i would pay the price by any means necessary......after i pay cali yaris
cali yarisCanoga Park, CA · Nov 18, 2008#45
after you pay me, right? 😁
whooppee777Maryland · Nov 19, 2008#46
(edited previous post) ofcourse. that supercharger is all i think about
TEHxFALLEN V1.2Calabasas, CA · Nov 19, 2008#47
So what do you think your asking price range will be?

I need to know now, so I can race beaters for pinkslips, sell those for cash, and save up just for you!
turboyarisThread starterSouthern New Jersey · Nov 19, 2008#48
i'm still waiting on final pricing for the brackets I need, but powdercoated they should be in the $250 range
TheRealEnthMiami, FL · Nov 19, 2008#49
nice =D
turboyarisThread starterSouthern New Jersey · Nov 19, 2008#50
maybe cheaper 😈 whooo knowssssssss

I may offer a slightly cheaper model made of standard DOM instead of Chromolly, I will have to way the cost effectiveness of it