Yarisworld Archive

NST pulley question

15 posts · 5,358 views

cookfreeordieOriginal postFL · Nov 13, 2008#1
Seems nice, but is it the best bang for your buck performance wise?

If not, than what would be?

Thanks ahead

Replies 14

tk-421Dagobah · Nov 13, 2008#2
NST products are top-of-the line. I have the whole pulley set, as well as the SSK.
Performance-wise, you can't go wrong with these babies. Some of my favorite mods so far for sure. 👍
Kaotic LazagnaCentral Valley, CA · Nov 13, 2008#3
I like my CR-Lite crank pulley. I can see the difference when accelerating.
PETERPOOPOahu · Nov 13, 2008#4
i got all NST pulleys. Underdrive, Water pump and alt pulley. i could feel a diff when i put them in. nothing huge.

i went with the underdrive because i am going to turbo in the future. get crank pulley if you are going to s/c.
eTiMaGoBangkok, Thailand · Nov 13, 2008#5
Best bang for the buck as a first engine mod, definitely, it's an improvement you can really feel (especially if you drive a manual), I "only" have the regular CR-Lite and it was a big difference in engine response, the underdrive one should be just that much sweeter 🙂
ruimondPerth, Australia · Nov 13, 2008#6
Do these fit the 2NZ-FE (1.3L)? Might invest in the set later on.
NonStopTuningUSA · Nov 14, 2008#7
Originally Posted by ruimond ↑
Do these fit the 2NZ-FE (1.3L)? Might invest in the set later on.

Yes, they do 👍

And to the OP... yes, these are often called the best bang for buck mod 👍👍

I would highly recommend the Underdrive Crank, Alt, and WP Pulleys.
WeSellCarPartsWilkes-Barre, PA · Nov 14, 2008#8
Seems that this is a very popular seller for us for folks looking to free up some hp and also get an amazing product. Well worth the money in my eyes!
cookfreeordieThread starterFL · Nov 14, 2008#9
Yeeeeah, I think Im going to end up with one soon....

Should I just go with the CR-lite or should I get the underdrive? I don't plan on doing a turbo and Ill prob. wont get the water pump and alt pulleys any time too soon.
CASTREXCosta Rica · Nov 14, 2008#10
Originally Posted by cookfreeordie ↑
Yeeeeah, I think Im going to end up with one soon....

Should I just go with the CR-lite or should I get the underdrive? I don't plan on doing a turbo and Ill prob. wont get the water pump and alt pulleys any time too soon.
Go for the underdrive one.
toadbowser's castle · Nov 14, 2008#12
rookie question - by saying 'the belt is re-tensioned for the smaller pulley(underdrive)' mean i have to do anything else? i'm not the most mechanically-inclined and looking for easiest install. i'm want best bang-for-the-buck for na engine and i've heard nothing but good things about these. if it's more work i'll just get the lite-pulley!
CASTREXCosta Rica · Nov 14, 2008#13
Originally Posted by toad ↑
rookie question - by saying 'the belt is re-tensioned for the smaller pulley(underdrive)' mean i have to do anything else? i'm not the most mechanically-inclined and looking for easiest install. i'm want best bang-for-the-buck for na engine and i've heard nothing but good things about these. if it's more work i'll just get the lite-pulley!
Is the same amount of work.

'the belt is re-tensioned for the smaller pulley(underdrive)' means that the difference is small enough so you do NOT need to buy a shorter belt.

For the instal of any of those 2 pulleys you WILL have to loose the alternator so the work effort will be the same.

If you are not very mechanically inclined you will probably need a shop to install it for you. Is not that difficult but you need an Air gun to loose the bolt on the crank
cali yarisCanoga Park, CA · Nov 14, 2008#14
^ +1

power/air tools make this job a LOT easier.
cookfreeordieThread starterFL · Nov 14, 2008#15
Thanks a ton everyone👍