Yarisworld Archive

Hello Everybody...

81 posts · 13,741 views · page 2 of 2

Replies continued

CTScottUSA, CT · Nov 18, 2008#51
Originally Posted by Chupacabra ↑
Scott,
I assume that you "shopped" those for a while. Is $26 a shipped price? How much would these light cost if I walked into Napa to buy them?...I assume about $40-$45?
I had a $50 gift certificate to Amazon that has been sitting on my desk for a couple of months, so I really didn't shop around. Shipping was $4.59.
ChupacabraThread starterCT · Nov 18, 2008#52
Gotcha. Hmmmmmm....Wal-Mart may be an option then!
eric81Clarksville, IN · Nov 18, 2008#53
Got mine at Target for about $20 on sale. Usually $30. I saw them for $40 to $60 on average. Yay Target!
ChupacabraThread starterCT · Nov 20, 2008#54
OK....so after going through threads at an endless pace, I have decided that, for now, I will go with DF210 lowering springs on stock dampers. I also purchased an NST short shift upgrade. Depending on how fast I get the springs...I will install them prior to the snow falling. Would anybody be interested in a documented process with pictures? I know that a few already exist...
eric81Clarksville, IN · Nov 20, 2008#55
If you want to drive to Olympia, WA, sure. Your Yaris might fit in overhead storage, but unless you drain the gas and oil out of it, it won't make it past the x-ray machine and security detail. I have the issue of Siphon where it walks you through how to replace the springs. Want me to take some pics of the pages and send them to you via PM? Let me know.
33OHDover, Ohio · Nov 20, 2008#56
I have the DF210 springs and I am very happy with them. It's definitely a stiff ride (but still completely tolerable for a daily driver). Very sporty feeling and you can actually control the car.
ChupacabraThread starterCT · Nov 20, 2008#57
Originally Posted by eric81 ↑
If you want to drive to Olympia, WA, sure. Your Yaris might fit in overhead storage, but unless you drain the gas and oil out of it, it won't make it past the x-ray machine and security detail. I have the issue of Siphon where it walks you through how to replace the springs. Want me to take some pics of the pages and send them to you via PM? Let me know.

PM sent 🍻
ChupacabraThread starterCT · Nov 23, 2008#58
I wanted to upload one more picture before I drop the car.

Picture not included in this copy
ChupacabraThread starterCT · Nov 23, 2008#59
cool. I was a little bit surprised at how weak the lights were but it sounds like the silverstars will be a nice improvement. I am just about ready to hit 300 miles....still on my first tank of gas. 😁
ChupacabraThread starterCT · Nov 24, 2008#60
👍Just threw in the NST short shift (external). Took about 45 seconds to install....awesome difference in shifting. I'd say it reduced the throw ATLEAST 60%

Also worth noting for those who might not have done the install...you won't be able to re-install the original retention pin....but the pin that comes with the unit is more than enough to keep the assy together. I definitely think that the car is much easier to drive now and rev-match.
eric81Clarksville, IN · Nov 25, 2008#61
Next, do the metal bushings in the cables ($20 or so at NST) and see how you like that. I am waiting now to have a litlte bit more cash to buy the bushings for the cage because I liked the ones for the cables so much. It shortens it even more by making the shifter more solid. I wouldn't say 60% shorter, but it's like a whole new transmission, right? Now, I just have to find some little old lady to rob so I can afford those cage bushings.......😈
ChupacabraThread starterCT · Nov 28, 2008#62
So I did the DF210 installation today and it couldn't have been easier. It took me about 4 hours taking my time. I also removed the entire cowl w/wiper motor etc for ultimate access. These pictures were taken before the car was driven and I am convinced that just driving the car yielded another 1/4" drop. The ride is unbelievable!!! I was worried that it was going to be harsh but is soft....maybe softer than stock!!!!! a GREAT mod....I am so happy that I did this. So....I did the NST short shifter and the DF210's and those are 2 awesome mods. My next mod is going to be the OSRAM night vision headlights which arrived today and the hatch spoiler which comes tomorrow. The car only has 394 miles on it. Here are pics, as mentioned, before driven.

Picture not included in this copy

Picture not included in this copy
CCILovePinkCCSouth Carolina · Nov 28, 2008#63
Nice!
Bob_VTVermont · Nov 28, 2008#64
Nice drop. Just not pratical up here in VT due to snow........

Headlights to dim? Before you invest in new bulbs..... try to adjust them up just a bit.
CTScottUSA, CT · Nov 28, 2008#65
Originally Posted by Chupacabra ↑
So I did the DF210 installation today and it couldn't have been easier. It took me about 4 hours taking my time. I also removed the entire cowl w/wiper motor etc for ultimate access. These pictures were taken before the car was driven and I am convinced that just driving the car yielded another 1/4" drop. The ride is unbelievable!!! I was worried that it was going to be harsh but is soft....maybe softer than stock!!!!! a GREAT mod....I am so happy that I did this. So....I did the NST short shifter and the DF210's and those are 2 awesome mods. My next mod is going to be the OSRAM night vision headlights which arrived today and the hatch spoiler which comes tomorrow. The car only has 394 miles on it. Here are pics, as mentioned, before driven.
Looks great!
ChupacabraThread starterCT · Nov 29, 2008#66
Thanks guys...the car was dirty so I washed it today. The spoiler came but I just didn't have enought time to get it installed....looks great though (factory paint). So...for you guys with a 2009, not sure if the 2008 configuration-wise around the rear of the headlights but holy shit is a ROYAL MFPITA to change the headlight bulbs. I am no stranger to the process of installing H4 style bulbs but they give you ZERO room to work with especially on the driver's side unit. Needles to say, about 1 hour and 25 minute later I was done with the pair. I hope the light output is THAT much better. Anywho...here are a few clean shots....2 with steelies and 1 with the caps back on.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
CTScottUSA, CT · Nov 29, 2008#67
Originally Posted by Chupacabra ↑
Thanks guys...the car was dirty so I washed it today. The spoiler came but I just didn't have enought time to get it installed....looks great though (factory paint). So...for you guys with a 2009, not sure if the 2008 configuration-wise around the rear of the headlights but holy shit is a ROYAL MFPITA to change the headlight bulbs. I am no stranger to the process of installing H4 style bulbs but they give you ZERO room to work with especially on the driver's side unit. Needles to say, about 1 hour and 25 minute later I was done with the pair. I hope the light output is THAT much better. Anywho...here are a few clean shots....2 with steelies and 1 with the caps back on.

With the bulbs, the service manual shows to remove the entire headlight assembly (4 screws to do so). From your post, it sounds like you "managed" to change them without removing them?
ChupacabraThread starterCT · Nov 29, 2008#68
Scott,
Yes....I did them without removing anything. My manual doesn't mention anything about removing the bumper (strange).
CTScottUSA, CT · Nov 29, 2008#69
Originally Posted by Chupacabra ↑
Scott,
Yes....I did them without removing anything. My manual doesn't mention anything about removing the bumper (strange).
Not the bumper, just the headlight assembly (and I just looked at the manual and it is three screws and three connectors to remove them). I still haven't received my Amazon.com bulbs yet...

By the way, It looks like you did the springs in your driveway. Now that it's starting to get cold here, if you want to work on the car in a heated garage, let me know. I'm only about 25 minutes from you.
ChupacabraThread starterCT · Nov 29, 2008#70
Originally Posted by CTScott ↑
Not the bumper, just the headlight assembly (and I just looked at the manual and it is three screws and three connectors to remove them). I still haven't received my Amazon.com bulbs yet...

By the way, It looks like you did the springs in your driveway. Now that it's starting to get cold here, if you want to work on the car in a heated garage, let me know. I'm only about 25 minutes from you.
Scott,
Thank you very much for extending that offer. I think that I am pretty much done for now with the car as it is a commuter. 🙂 I do have a garage but no heat...I wish that it were heated! What page is that in the manual if you don't mind me asking. I put the manual back in the glove box so it's not in front of me but when I looked up "Headlights" it mentioned pg 286 I think? I don't remember seeing anything about removing anything.🤷
CTScottUSA, CT · Nov 29, 2008#71
Originally Posted by Chupacabra ↑
Scott,
Thank you very much for extending that offer. I think that I am pretty much done for now with the car as it is a commuter. 🙂 I do have a garage but no heat...I wish that it were heated! What page is that in the manual if you don't mind me asking. I put the manual back in the glove box so it's not in front of me but when I looked up "Headlights" it mentioned pg 286 I think? I don't remember seeing anything about removing anything.🤷
I was looking at the 09 service manual, not the owners manual.
ChupacabraThread starterCT · Nov 29, 2008#72
Originally Posted by CTScott ↑
I was looking at the 09 service manual, not the owners manual.
Ahhh...gotcha! I was looking at the owner's manual! 😲
ChupacabraThread starterCT · Dec 3, 2008#73
Did the mudguards and spoiler today. Very, very easy installation(s). Here are a few quick snaps of the camera....

Picture not included in this copy

Picture not included in this copy
33OHDover, Ohio · Dec 4, 2008#74
Looks sharp!
CtrlAltDefeatIndianapolis IN · Jan 26, 2009#75
I'm thinking about getting some DF210s but am unsure about how low it gets and trouble getting over speed bumps.... are those 15 inch wheels? And do you have a lot of trouble with the height drop?
33OHDover, Ohio · Jan 26, 2009#76
Originally Posted by CtrlAltDefeat ↑
I'm thinking about getting some DF210s but am unsure about how low it gets and trouble getting over speed bumps.... are those 15 inch wheels? And do you have a lot of trouble with the height drop?
I run on DF210's and I have 15" stock steelies and 15" aftermarket rims. I have no problems at all with rubbing or anything.

The only thing that scrapes over large inclines (like ramps, not speedbumps) would be the muffler.
CtrlAltDefeatIndianapolis IN · Jan 26, 2009#77
well it looks really good, and the I really like to look of the black wheels... people seem to hate on the steelies a lot, but with small wheel gap, they look pretty good to me...
33OHDover, Ohio · Jan 26, 2009#78
I rock steelies in the winter. In the summer I run black wheels.

1 attachment not included in this copy

CtrlAltDefeatIndianapolis IN · Jan 26, 2009#79
🙌
ChupacabraThread starterCT · Jan 26, 2009#80
I don't mind the steelies because the hide the puny brakes and drums in the back. I understand that there isn't an engineering need for anything more than drum power in the rear but man.....drums are so OLD. 🤷
CtrlAltDefeatIndianapolis IN · Jan 26, 2009#81
heh, yea I know, drums are so ugly.... but rotors are not needed. My yaris stops on a dime on stock😁