Thanks 🙌Originally Posted by kustom play ↑no its still off so i would assume the white must of been a tad bit different then my car
but like i said its not that bad and im happy with the product
Official Eyelids Pics Thread
310 posts · 546,423 views · page 3 of 7
Replies continued
Here's mine Thanks Tk 👍
3 attachments not included in this copy
Just showing off mines thanks to Garm, I do not see what the big deal is about getting them painted they really transform the car. Thanks Garm.
Picture not included in this copy
Picture not included in this copy
TK, putting mine back onto my new '09. We'll see how the look on the new headlights.
can i get a pic of the turn signal on? :) i'm considering getting a pair of these for yaris :)Originally Posted by niveks240 ↑yeah but honestly you can see the reflection. and looks awsome.
Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.Originally Posted by 1NZYaris1 ↑Here's mine Thanks Tk 👍
Here you go Chris 👍Originally Posted by TinyGiant ↑can i get a pic of the turn signal on? :) i'm considering getting a pair of these for yaris :)
1 attachment not included in this copy
Hi Steve , As far as the color matching goes it really depends onOriginally Posted by ScubaSteve ↑Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.
who's doing it for you , but i have not had any problem's yet , touch wood 😛
is there any DIY to put the eyelids? ... i just bought a pair and i dont know how to install them...
do i need to open the lamp? or it's installed over the lamp from the outside?
do i need to open the lamp? or it's installed over the lamp from the outside?
I agree! Getting them painted locally is quick and not that expensive. You also get the best results, since they match it to your car's paint.Originally Posted by shambala9er ↑Just showing off mines thanks to Garm, I do not see what the big deal is about getting them painted they really transform the car. Thanks Garm.
No problem, Ray! Thanks for the nice pics. 👍Originally Posted by 1NZYaris1 ↑Here's mine Thanks Tk 👍
I tested v3's on an 09 and they fit perfectly. I didn't need to change the design at all. Please post more pics of your awesome Yaris!Originally Posted by Treyz ↑TK, putting mine back onto my new '09. We'll see how the look on the new headlights.
Any reputable shop should be able to match your color without issues. Just make sure they use enough flint to match your color just right. 👍Originally Posted by ScubaSteve ↑Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.
There's no DIY per say, since the process is very simple:Originally Posted by t0m4s ↑is there any DIY to put the eyelids? ... i just bought a pair and i dont know how to install them...
do i need to open the lamp? or it's installed over the lamp from the outside?
- Clean the areas with rubbing alcohol and let dry
- Stick one side of the 3M tape below each piece
- stick the other side on top of each lamp
- press firmly on both eyelids and let them set 10-15 mins
- Done!
Here are v2's on my v2.0 ... I gotta admint, the curve fit's 100% beter for the base than they did on v1.0 lol ...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Awesome work Treyz, I always wanted to see how the eyelids will look on an '09. Thanks!
another question...lets say we wanted to remove the lids with little to no damage...can it be done with a heat gun or extemely powerful hair dyer? would it damage both headlight and lid?
nice, treyz, awesome to see how well they follow the "kink" in the 09 headlights!
I can't tell you how many times I've taken mine off and put back on .. no problems at all. I'm running with version 2 of these eyelids which still has the base which was later eliminated for version 3.Originally Posted by msfire671 ↑another question...lets say we wanted to remove the lids with little to no damage...can it be done with a heat gun or extemely powerful hair dyer? would it damage both headlight and lid?
1. Initial install
2. Removed, wrapped in vinyl, and reapplied
3. Removed for winter '08/'09
4. Reapplied for FL trip
5. Removed for trade in of '07
6. Reapplied for the new '09
Originally Posted by Treyz ↑Here are v2's on my v2.0 ... I gotta admint, the curve fit's 100% beter for the base than they did on v1.0 lol ...
awesome! I really wanted to get some eyelids but weren't sure if they fit the 09. thanks!
where can you get the eyelids painted
You can easily do it yourself. Check out www.AutomotiveTouchUp.com for the supplies. Back in December I paid $19.95 for the spray paint (12oz) and $7.95 for the clear coat (12oz). They make it real easy to get the right paint. Total shipped to my door is $36.23. Color match was spot on. Look back through this thread for some of my other posts around the December, January timeframe. I have some pics posted and how I prepped them.Originally Posted by Rnankoo ↑where can you get the eyelids painted
Good luck! 👍
loooks awesome! 😁Originally Posted by Treyz ↑I can't tell you how many times I've taken mine off and put back on .. no problems at all. I'm running with version 2 of these eyelids which still has the base which was later eliminated for version 3.
1. Initial install
2. Removed, wrapped in vinyl, and reapplied
3. Removed for winter '08/'09
4. Reapplied for FL trip
5. Removed for trade in of '07
6. Reapplied for the new '09
but how do you remove it and not damage it? my brother put it on for me but it looks a bit off..the way im looking at yours and everyones it looks flushed with the hood...thats the look im going for..
I got mine painted for $80.00..
so fellas...some tips to removing please! 🆘
Heat is the trick to making the double sided tape easier to handle. Either do it on a hot sunny day, or use a blow dryer to heat the tape up and carefully pull them off slowly.Originally Posted by msfire671 ↑loooks awesome! 😁
but how do you remove it and not damage it? my brother put it on for me but it looks a bit off..the way im looking at yours and everyones it looks flushed with the hood...thats the look im going for..
I got mine painted for $80.00..
so fellas...some tips to removing please! 🆘
What version of the eyelids do you have?
i got the ones from garm!
thanks for the reply.
thanks for the reply.
Lol .. yeah, the ones that Garm sells are from TK ... probably Version 3's then.
got it on...gotta fix one side though..its a pita to get it off!
4 attachments not included in this copy
nice! my car only sexier! i need the grille and the eyelids.Originally Posted by drbilal ↑Picture not included in this copy
Picture not included in this copy
im trusting you about this do it yourself paint job. 😲 my color is silver streak mica. can i hit u up 4 any questions if need be? females tend to need assistance sometimes lol. and it was $36.23 lol.Originally Posted by Herbicidal ↑You can easily do it yourself. Check out www.AutomotiveTouchUp.com for the supplies. Back in December I paid $19.95 for the spray paint (12oz) and $7.95 for the clear coat (12oz). They make it real easy to get the right paint. Total shipped to my door is $36.23. Color match was spot on. Look back through this thread for some of my other posts around the December, January timeframe. I have some pics posted and how I prepped them.
Good luck! 👍
hi!!!Originally Posted by canadian_princess ↑nice! my car only sexier! i need the grille and the eyelids.
No problem. I think the hardest part was to figure out a way to hold the eyelids so you can paint them and let them dry. You only need to get to the top and edges, the bottom can be left un-painted. I ended up using papertowel tubes, no papertowels on it of course, and taped them to the underside of the eyelids. Once they are secure, find a spot that you can set the tube down (standing it upright) and paint. Maybe stick a screwdriver into the ground and put the tube over it. Start the paint process by holding down the button on the spray paint can before you get to the eyelid and continue with the paint until after the eyelid. Hold the can about 8 - 10" away and move the spray can back and forth smoothly. Don't try to cover it in one or two passes. Be patient and follow the directions on the cans. Many light coats are better than 2 or 3 thick coats. Follow the same process for the clear coat, making sure the actual paint has had plenty of time to cure. Again, check the clear coat spray can for when it's safe to spray the clear. You can do it! 👍Originally Posted by canadian_princess ↑im trusting you about this do it yourself paint job. 😲 my color is silver streak mica. can i hit u up 4 any questions if need be? females tend to need assistance sometimes lol. and it was $36.23 lol.
hello. 😉Originally Posted by Treyz ↑hi!!!
Originally Posted by Herbicidal ↑No problem. I think the hardest part was to figure out a way to hold the eyelids so you can paint them and let them dry. You only need to get to the top and edges, the bottom can be left un-painted. I ended up using papertowel tubes, no papertowels on it of course, and taped them to the underside of the eyelids. Once they are secure, find a spot that you can set the tube down (standing it upright) and paint. Maybe stick a screwdriver into the ground and put the tube over it. Start the paint process by holding down the button on the spray paint can before you get to the eyelid and continue with the paint until after the eyelid. Hold the can about 8 - 10" away and move the spray can back and forth smoothly. Don't try to cover it in one or two passes. Be patient and follow the directions on the cans. Many light coats are better than 2 or 3 thick coats. Follow the same process for the clear coat, making sure the actual paint has had plenty of time to cure. Again, check the clear coat spray can for when it's safe to spray the clear. You can do it! 👍
oh shit i hope i didnt get the wrong color. its the exact same as those big pics right above. well, the one on my profile.i know theres a darker silver almost grey. thats not me.🙁
so< treyz... what the hell is a bayou yaris? lol
oh. duh, sorry. thats like me saying 2007 streak yaris sedan. lol
heres mine i thought i would do something a little different 😁
2 attachments not included in this copy
interesting for sure. How does that look with the lights on?.. no bad shadows or anything?
Use a blow dryer next time to strech the vinyl out so you don't have the folds/crinkles. You will need to pull off the headlights to be successful in that.Originally Posted by falker ↑heres mine i thought i would do something a little different 😁
yeah i pulled them off but i only had a blow dryer availableOriginally Posted by Treyz ↑Use a blow dryer next time to strech the vinyl out so you don't have the folds/crinkles. You will need to pull off the headlights to be successful in that.
and its industrial window tint
but its only temporary till i buy some better materials
Any update?Originally Posted by canadian_princess ↑oh shit i hope i didnt get the wrong color. its the exact same as those big pics right above. well, the one on my profile.i know theres a darker silver almost grey. thats not me.🙁
Yeah, in this this case, Vinyl would be the best case, but you need to see what's translucent. But the tint should have contoured better with the heat though no?Originally Posted by falker ↑yeah i pulled them off but i only had a blow dryer available
and its industrial window tint
but its only temporary till i buy some better materials
When they offer 09 LB headlights without the yeller side markers I'll get the eyelids, otherwise it just accenuates the problem.
What do you mean? I have an 09 liftback with the eyelids carrried over from the 07.Originally Posted by regal ↑When they offer 09 LB headlights without the yeller side markers I'll get the eyelids, otherwise it just accenuates the problem.
I mean the headlight assembly without the yellow side markers like you can get for 07-08. Adding eyelids to an ugly headlight just draws attention to the bad styling.Originally Posted by Treyz ↑What do you mean? I have an 09 liftback with the eyelids carrried over from the 07.
^ Most states require that amber reflector. Toyota put them in the head light because if they put it anywhere else then it would have been "BAD" styling. If you take out amber reflector you will probably get ticketed for it alot. But if it really bothers you that much then bake your head light, pull them apart, and remove the reflector.
WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!😳Originally Posted by Herbicidal ↑Any update?
Cool! Looking forward to those pics. 👍Originally Posted by canadian_princess ↑WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!😳
Yaaaay! You did it! Looks great. 🙂Originally Posted by canadian_princess ↑WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!😳
Anyone throw the eyelids on some of those Ebay projector headlights? I bet you it will look wicked as hell.
Some of these cars looked stoned.
Etimago's ride has it, was one of the first that i thought of. Can't remember who else has it this way.Originally Posted by marlondog ↑Anyone throw the eyelids on some of those Ebay projector headlights? I bet you it will look wicked as hell.
Hrmm i might get some from Garm for my projectors. lol.
Picture not included in this copy
You did them? Shoot....I did it. They came out sweet. Too bad they're not completely straight. Good enough.Originally Posted by canadian_princess ↑WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!😳
BTW: notice how I'm following you?
TA 4E!
How so?Originally Posted by FreddysEvolutionIX ↑Too bad they're not completely straight. Good enough.