Yarisworld Archive

A-Pillar gauge pods that can fit tweeters?

10 posts · 10,358 views

IsLNdbOiOriginal postLas Vegas, NV · Nov 8, 2008#1
In my '07LB I mounted my tweeters on the front most plastic pieces along the door armrest. This time, I'd like to mount the tweeters on the A-pillar w/o having to modify the A-pillar.

One way to do this would be to use A-pillar gauge pods. Has anyone found a company that makes A-pillar gauge pods for both the driver side and passenger side A-pillars?

The only thing I've found are these:
http://www.glowshiftdirect.com/Unive...illar-Pod.aspx
http://www.glowshiftdirect.com/Unive...lar-Pod-1.aspx

BUT I don't know if they'll fit over the Yaris A-pillars. Also, most tweeters I've seen use mounting hardware that require 2" or less diameter hole. These gauge pods have 2-1/16th" holes.

Has anyone used these universal A-pillar gauge pods in a Yaris LB?

Replies 9

cali yarisCanoga Park, CA · Nov 8, 2008#2
I sold one of those Glowshift A-pillar things to a guy and he returned them for poor fitment. That's all i can say about that from personal experience.
IsLNdbOiThread starterLas Vegas, NV · Nov 8, 2008#3
Could you heat these universal pillars with a hair dryer and mold them more to the shape of the section of the Yaris A-pillars you want to put them on?
drbilalNYC | Pakistan · Nov 8, 2008#4
Thats what most people say you have to do as these universal pods only fit a small selection of cars. From what ive read, heating it up will allow you to sort of shape it but then again that could f**k it up if done wrong. Ive been wondering if I should order these or not for some time and just wish there was a perfect fit made for the yaris pillar.
cali yarisCanoga Park, CA · Nov 8, 2008#5
I think camelll on here did a nice job with his, see if he can repost his pics for ya.
andriesSpain · Nov 8, 2008#6
Originally Posted by IsLNdbOi ↑
In my '07LB I mounted my tweeters on the front most plastic pieces along the door armrest. This time, I'd like to mount the tweeters on the A-pillar w/o having to modify the A-pillar.

One way to do this would be to use A-pillar gauge pods. Has anyone found a company that makes A-pillar gauge pods for both the driver side and passenger side A-pillars?

The only thing I've found are these:
http://www.glowshiftdirect.com/Unive...illar-Pod.aspx
http://www.glowshiftdirect.com/Unive...lar-Pod-1.aspx

BUT I don't know if they'll fit over the Yaris A-pillars. Also, most tweeters I've seen use mounting hardware that require 2" or less diameter hole. These gauge pods have 2-1/16th" holes.

Has anyone used these universal A-pillar gauge pods in a Yaris LB?
My Yaris has OEM tweeter mounted in the a-pillar. Is that not much nicer?(picture)
A gauge pod is not possible because the cutain airbags are in the a-pillar.
(if they exploded I get a gauge in my face🙂)
IsLNdbOiThread starterLas Vegas, NV · Nov 8, 2008#7
If your curtain airbags deploy you'll have OEM tweeter and mount in your face. The curtain airbags are near the top of the A-pillar. If they deploy, the top of the A-pillars pop first and the pillars go outwards, deploying parallel to the windshield. They don't just blow straight out towards the front passengers.
cali yarisCanoga Park, CA · Nov 23, 2008#8
^ +1

I've had that apart and the bags don't go very far down the pillar.
cali yarisCanoga Park, CA · Nov 23, 2008#9
How about like this, never seen it done, I think it would be pretty cool:
(one on each side though, obviously)

Picture not included in this copy

Picture not included in this copy
drbilalNYC | Pakistan · Nov 23, 2008#10
I like that, are those pretty much universal dash mounting pods just turned sideways?