Yarisworld Archive

Anyone running an Injen CAI?

38 posts · 11,213 views

CompanyXPaladinOriginal postSoCal · Nov 7, 2008#1
As the title says.. The Injen website claims 8 ft-lbs of torque and 7 horsepower gains just by installing their ($250 😲) intake. Anyone with experience/insight on this one? Thats approx. 10% gains (again, according to Injen) which I'm sure would be noticeable in our econobox...

Picture not included in this copy

Replies 37

mikenacaratoBrentwood, TN · Nov 7, 2008#2
im not even seeing our car listed on their site. what link did you get this from?
mikenacaratoBrentwood, TN · Nov 7, 2008#4
thats a pretty nice gain. thanks for posting that.
YodaTheToyotaMinnnnneappolllis, MN · Nov 7, 2008#5
I'm a newbie, but I'm running the Injen Intake in a 2008 Yaris Liftback. Installation was pretty easy. Here are a couple pictures (if I do the insert image right ...). Makes a nice growl when you rev it up. Feels more peppy in the high rev area, but I don't have a dyno so who knows. Looks good too. :)

2 attachments not included in this copy

Fluid MotorsportsOrlando · Nov 9, 2008#6
INJEN does make a very pretty intake, and fairly reasonably priced too for the beautiful product they put out.

Right now I am only selling it for $220, https://www.fluidmotorsports.com/p-146-air-intake.aspx

The fact alone the ability to clean the filter elment is worth while so you dont have to buy replacement filters. It sounds nice and looks great!
mikenacaratoBrentwood, TN · Nov 9, 2008#7
so do you stock it onsite? it would be coming from florida instead of the usual california? i would get that in 2 days by ground.
Fluid MotorsportsOrlando · Nov 9, 2008#8
We can have it shipped directly from them.

We havent stocked any of their product yet just because we just started gauging interest on the forums.

Let me know
RanggarnGold Coast, QLD, Australia · Nov 9, 2008#9
Could ya ship to Australia?
Fluid MotorsportsOrlando · Nov 9, 2008#10
Yes we ship internationally
AznGoukiCalgary · Nov 11, 2008#11
I'd like confirmation on those gains. If it's true, wouldn't this be the best intake?
bzinn 1University Place,WA · Nov 11, 2008#12
I do not think it gives that much hp.I have it and at best I would say 3-4 actual hp.Car does respond quicker and pull a little harder,but not 10% gains.Install sucked as the bumper has to come off to tighten the filter mount,I tried the fender gap trick and it was a to small to get my fat arms in.

Intake does growl very nice.I put it on before the Greddy exhaust and the two together work well.
RagnaCaTVillalba, Puerto Rico · Nov 12, 2008#13
I've looking at the design of this intake for a while.It's not like other intakes this one seems to cuase a ram effect which is good from wide to narrow.
harveyjaiSydney, Australia · Nov 13, 2008#14
i am just wondering where do u suck the cold air from when you put that on........
darkmoon87Vancouver, BC · Nov 13, 2008#15
Originally Posted by harveyjai ↑
i am just wondering where do u suck the cold air from when you put that on........

frorm underneath the car where the filter is facing at
harveyjaiSydney, Australia · Nov 13, 2008#16
arent the fenders blocking it?
maybe a photo might help....lol
mikenacaratoBrentwood, TN · Nov 13, 2008#17
the air down in the fenders is going to be a lot colder then the air next to the engine. the fenders are blocking direct airflow, but overall the air is cooler.
WeSellCarPartsWilkes-Barre, PA · Nov 14, 2008#18
We are an authorized Injen dealer (Check on injen.com - dealer zip code - 18708).

I have sold about 6-7 of these and everyone has been pleased. I currently have 2 polish and 3 black in stock if anyone needs one.

Support your authorized vendors here on yarisworld! We are proud to help the community out!

Thanks
Never EnoughGrant, MI · Nov 14, 2008#19
This is a great intake. Injen is one of the best manufacturers out there. We sell a lot of these as well.
VinsanityOakland, Cali · Nov 17, 2008#20
sick man... yodathetoyota..nice
BarrothPA · Jan 15, 2009#21
this is one of the few intakes I would recommend to everyone quilty is top notch and the gains are more accurate compared to other companys had there intakes on a few of my cars and really loved them.
AlexNet0Rockland, ME · Jan 17, 2009#22
still no real world dyno results from this intake? I know the injen results are posted but I never like to go by that.
minired5stbySan Diego · Jan 17, 2009#23
I run that too and it feels like it just bumps it up back to the factory specs of 106hp, maybe a tad higher. But I definately can say it makes for a smooth ride and power especially in 3rd grear. The the fact that I also have a Tanabe axel back exhaust helps out as well.
_S7V7N_South Texas · Jan 17, 2009#24
yo Fluid i had told Felix to ask if you guys carried the shocks and springs, checked on your website but not too much.
Danish YarisCopenhagen, Denmark · Jan 18, 2009#25
Hi

Is this Injen intake only for 1,5L engines?
I have an European 1,3L VVT-I engine with stock 87hp. Would it fit that too?

Regards Steven.
CASTREXCosta Rica · Jan 18, 2009#26
Originally Posted by Danish Yaris ↑
Hi

Is this Injen intake only for 1,5L engines?
I have an European 1,3L VVT-I engine with stock 87hp. Would it fit that too?

Regards Steven.
It depends on the configuration of youur 1.3 as there are 2 different inatke set ups on the 1.3L


If your OE intake looks the same as the OEM intake of a US spec Yaris... the you can use any of the intakes sold for the US yaris.
BurningbjornBerkel en rodenrijs, the Netherlands · Jan 18, 2009#27
Originally Posted by Danish Yaris ↑
Hi

Is this Injen intake only for 1,5L engines?
I have an European 1,3L VVT-I engine with stock 87hp. Would it fit that too?

Regards Steven.
Your engine probably looks the same as mine, so it won't fit.
I have yet to find a CAI for the 1.3
Called K&N and they said there not going to make one for the 1.3! 🤷

Picture not included in this copy
Danish YarisCopenhagen, Denmark · Jan 19, 2009#28
Hi

Yes, my engine looks like yours.

Regards Steven.
CASTREXCosta Rica · Jan 19, 2009#29
^^^

That looks like a really easy upgradable intake.

You could go ghetto style and just take out the OEM paper filter out of the plastic box in top of the engine and the cut the plastic tube and replace it with an aluminium tube with a quality cone filter at the end...

You probably won't get the nice sound of a regular intake, but at least you could improve the flow a little.
RagnaCaTVillalba, Puerto Rico · Jan 19, 2009#30
Originally Posted by Burningbjorn ↑
Your engine probably looks the same as mine, so it won't fit.
I have yet to find a CAI for the 1.3
Called K&N and they said there not going to make one for the 1.3! 🤷

Picture not included in this copy
That Engine is cute! 🙂
BurningbjornBerkel en rodenrijs, the Netherlands · Feb 9, 2009#31
Originally Posted by Danish Yaris ↑
Hi

Is this Injen intake only for 1,5L engines?
I have an European 1,3L VVT-I engine with stock 87hp. Would it fit that too?

Regards Steven.
Injen has a CAI for the 1.3! found it! 😉

http://www.showoffimports.nl/product...546&quantity=1
Never EnoughGrant, MI · Feb 9, 2009#32
No matter the vehicle. Injen has proven to have great products that truly yield what they claim. Injen is if not the best intake brand out, one of the best!
HavocMaryland · Feb 16, 2009#33
I just installed mine and Woo Hooo I love it! That first punch on the pedal with the POWOW sound sold me. 😁

2009 3dr
Picture not included in this copy


Picture not included in this copy


Leftovers...

Picture not included in this copy
whooppee777Maryland · Feb 16, 2009#34
Havoc check inbox for PM
andrubozcentral texas · Feb 16, 2009#35
I have one in black. looks good works good. can't find a cheap dyno day to get real data.
curious to how much dirt there is blowing around down in the fender. but since you have to undo about 16 bumper screws and fasteners to get to it, i'll wait till about 7500 miles from now. while i have the bumper cover off i'll do the fog/driving light install.

i want to save my stock airbox unmolested but have an idea to hack up an airbox [ if i can get another] and make the injen a little bit stealth. just clam shell the factory box over the injen. that way i have some storage under the hood for whatever inside the fake airbox.
Never EnoughGrant, MI · Feb 16, 2009#36
^Agreed... what he said! Support your vendors, we pay to help keep this site going. We are also a authorized vendor for Injen. Wesellcarparts or ourselves would love to help you guys get what you are looking for! Injen is one of the absolute best name brands for intake available.
ArkhangelPuerto Rico · Feb 17, 2009#37
Originally Posted by Fluid Motorsports ↑
INJEN does make a very pretty intake, and fairly reasonably priced too for the beautiful product they put out.

Right now I am only selling it for $220, https://www.fluidmotorsports.com/p-146-air-intake.aspx

The fact alone the ability to clean the filter elment is worth while so you dont have to buy replacement filters. It sounds nice and looks great!

🤷😲 Nothing for Sedan?
FryGuyNova Scotia, Canada · Feb 20, 2009#38
Originally Posted by Fluid Motorsports ↑
We can have it shipped directly from them.

We havent stocked any of their product yet just because we just started gauging interest on the forums.

Let me know
What is the typical order wait time? I have ordered one from you an its been a week, status still says "not shipped".

Edit: Order still not shipped and finally response back via email 5 days later. Fluid Motorsports please check your email more often!